{"id":1731,"date":"2019-02-27T18:37:21","date_gmt":"2019-02-27T17:37:21","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=1731"},"modified":"2020-03-25T20:34:11","modified_gmt":"2020-03-25T19:34:11","slug":"tasmota-gluehwuermchen-lichterkette-selber-bauen","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/","title":{"rendered":"HowTo: Tasmota – SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen"},"content":{"rendered":"

Neulich habe ich in den Regalen eines gro\u00dfen schwedischen M\u00f6belhauses das unten abgebildete Einmachglas gefunden. Einmachgl\u00e4ser sind keine Erfindung aus Schweden. Ich w\u00fcrde fast behaupten, dass sie irgendwo in jedem Haushalt noch rumstehen.<\/p>\n

Das man darin aber nicht nur Essen haltbar lagern kann sondern auch dekorative und Smarte \u00fcber W-LAN steuerbare Lampen daraus bauen kann will ich in diesem Artikel zeigen.<\/p>\n

\n

Sicherheitshinweise <\/span><\/h2>\r\n

Ich wei\u00df die folgenden Hinweise sind immer irgendwie l\u00e4stig und wirken unn\u00f6tig. Aber leider haben schon viele Menschen die es \"besser\" wussten aus Leichtsinnigkeit Augen, Finger oder anderes verloren bzw. sich verletzt. Im Vergleich dazu ist ein Datenverlust fast nicht der Rede Wert, aber auch diese k\u00f6nnen echt \u00e4rgerlich sein. Deswegen nehmt Euch bitte f\u00fcnf Minuten Zeit um die Sicherheitshinweise zu lesen. Denn auch das coolste Projekt ist keine Verletzung oder anderen \u00c4rger wert.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliatelinks\/Werbelinks<\/h2>\r\n

Die hier in aufgef\u00fchrten Links zu Online-Shops sind sogenannte Affiliate-Links. Wenn Du auf so einen Affiliate-Link klickst und \u00fcber diesen Link einkaufst, bekommt Nerdiy.de von dem betreffenden Online-Shop oder Anbieter eine Provision. F\u00fcr Dich ver\u00e4ndert sich der Preis nicht. Falls Du Deine Eink\u00e4ufe \u00fcber diese Links t\u00e4tigst unterst\u00fctzt Du Nerdiy.de dabei auch in Zukunft weitere n\u00fctzliche Projekte anbieten zu k\u00f6nnen. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Voraussetzungen<\/h2>\n

Hilfreiche Artikel:
\n<\/strong>Bevor ihr mit diesem Artikel startet solltet Ihr euch mit den Grundlagen des L\u00f6tens besch\u00e4ftigt haben. Informationen dazu findet Ihr in dem folgenden Artikel.
\nElektronik – Mein Freund der L\u00f6tkolben<\/a><\/em><\/strong><\/p>\n

Ben\u00f6tigtes Material:<\/strong><\/p>\n

In der folgenden Liste findet Ihr alle Teile die Ihr zur Umsetzung dieses Artikels ben\u00f6tigt.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n

Ben\u00f6tigtes Werkzeug:<\/strong><\/p>\n

In der folgenden Liste findet Ihr alle Werkzeuge die Ihr zur Umsetzung dieses Artikels ben\u00f6tigt.<\/strong><\/p>\n

\n
\n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Die ben\u00f6tigten 3D-Teile drucken<\/h2>\n

Download aller ben\u00f6tigten STL-Dateien: Tasmota – Gl\u00fchW\u00fcrmchen Lichterkette selber bauen<\/a><\/strong><\/em><\/p>\n

Geh\u00e4useteller:<\/strong><\/p>\n

Ihr k\u00f6nnt die 3D-Ansicht der STL-Datei mit gedr\u00fcckter Maustaste rotieren. Rein- und Raus-Zoomen k\u00f6nnt Ihr mit dem Mausrad.<\/p>\n

\n

Loch in das Einmachglas bohren<\/h2>\n

Die Elektronik zur Steuerung der Lichterkette wird sp\u00e4ter in ein Geh\u00e4use unter dem Einmachglas verstaut. Deswegen m\u00fcsst Ihr in den Boden des Einmachglases ein Loch Bohren.<\/p>\n

\"\"<\/a>
Dreht Euer Einmachglas dazu…<\/figcaption><\/figure>\n
\"\"<\/a>
um, sodass Ihr an den Boden heran kommt.<\/figcaption><\/figure>\n
\"\"<\/a>
Um das Loch in den Glasboden des Einmachglases zu bohren braucht Ihr einen speziellen Glasbohrer. Am besten ist ein Bohrer mit 10mm Durchmesser, dann ist das Durchf\u00e4deln der Lichterkette sp\u00e4ter etwas einfacher.<\/figcaption><\/figure>\n
\"\"<\/a>
Achtet beim Bohren darauf, dass Ihr etwas Wasser an das Bohrloch gebt. So wird der Bohrer beim bohren etwas gek\u00fchlt und der entstehende Bohrstaub wird gebunden.<\/figcaption><\/figure>\n
\"\"<\/a>
Habt Ihr das Loch fertig gebohrt achtet darauf, dass Ihr ggf. vorhandene Glassplitter entfernt. Au\u00dferdem kann die Schneid-kannte des Bohrlochs scharfkantig sein. Achtet darauf, dass Ihr euch nicht daran verletzt.<\/strong><\/span><\/figcaption><\/figure>\n
\n

MOSFET an ESP8266-Board anl\u00f6ten<\/h2>\n

Nun geht es daran die Steuerungselektronik vorzubereiten. Da die Lichterkette nicht direkt aus den Steuerungspins des ESP8266 versorgt werden kann muss die Lichterkette \u00fcber einen MOSFET geschaltet werden. Dieser muss nun angel\u00f6tet werden.<\/p>\n

\"\"<\/a>
Die Lichterkette wird wie in dem Schaltplan angegeben verdrahtet. Falls Eure Lichterkette eine andere Versorgungsspannung als 3,3V hat m\u00fcsst Ihr diese ggf. durch eine andere Versorgungsspannung und\/oder einen Vorwiderstand anpassen.<\/figcaption><\/figure>\n
\"\"<\/a>
Der BS170-MOSFET wird dabei als Low-Side-Treiber verwendet. Er schaltet also den negativen Leiter (Minuspol) der Lichterkette.<\/figcaption><\/figure>\n
\"\"<\/a>
Um den MOSFET anzul\u00f6ten legt Ihr ihn mit der runden Geh\u00e4usewand nach oben vor euch hin und verl\u00f6tet dann – wie abgebildet – die hinteren Beiden Pins mit den Anschl\u00fcssen „G“ und „D5“ des ESP8266-Adapterboards. Der \u00fcbrige Pin des MOSFET wird sp\u00e4ter angeschlossen.<\/figcaption><\/figure>\n
\n

Lichterkette anl\u00f6ten<\/h2>\n

Damit Ihr im n\u00e4chsten Schritt die Lichterkette mit dem MOSFET verbinden k\u00f6nnt muss diese vorher etwas vorbereitet werden. Dazu wird an die Zuleitung der Lichterkette jeweils ein kurzes St\u00fcck Leitung angel\u00f6tet. Am besten pr\u00fcft Ihr an dieser Stelle auch welche Leitung der Pluspol und welche der Minuspol ist und w\u00e4hlt dementsprechend die Farbe f\u00fcr die angel\u00f6tete Leitung.<\/p>\n

\"\"<\/a>
Die d\u00fcnnen Leitungen der Lichterkette sind mit durchsichtigem Klarlack lackiert. Dieser verhindert, dass in der Lichterkette selber Kurzschl\u00fcsse entstehen. Leider verhindert dieser Lack auch, dass der L\u00f6tzinn an der Leitung haftet. Damit dieser besser haftet solltet Ihr den Klarlack mit einem Messer abkratzen.<\/figcaption><\/figure>\n
\"\"<\/a>
Habt Ihr die Leitung angel\u00f6tet solltet Ihr die offenen Kontakte mit etwas Schrumpfschlauch isolieren.<\/figcaption><\/figure>\n
\"\"<\/a>
Nun k\u00f6nnt Ihr den Pluspol Eurer Lichterkette an den Pin „3V“ Eures ESP8266-Adapterboards anschl\u00f6ten. und den MOSFET…<\/figcaption><\/figure>\n
\"\"<\/a>
…auf die R\u00fcckseite des ESP8266-Adapterboards umbiegen. Achtet dabei darauf, dass die Beinchen des MOSFET keine anderen Kontakte oder Pins am ESP8266-Adapterboard ber\u00fchren. Danach k\u00f6nnt Ihr die \u00fcbrige Leitung(Minuspol) der Lichterkette an das noch freie Beinchen des MOSFETs anl\u00f6ten. Denkt daran vorher einen Schrumpfschlauch \u00fcber die Leitung zu ziehen damit Ihr die L\u00f6tstelle nach dem anl\u00f6ten isolieren k\u00f6nnt.<\/figcaption><\/figure>\n
\"\"<\/a>
Habt Ihr die Leitung angel\u00f6tet k\u00f6nnt Ihr…<\/figcaption><\/figure>\n
\"\"<\/a>
…die L\u00f6tstelle mit Schrumpfschlauch isolieren.<\/figcaption><\/figure>\n
\"\"<\/a>
Damit die Beinchen des MOSFET auch sp\u00e4ter keine Kontakte ber\u00fchren k\u00f6nnen und die L\u00f6tstelle(n) etwas vor mechanischer Belastung gesch\u00fctzt ist, solltet Ihr diese Stellen nun mit etwas Hei\u00dfkleber isolieren\/sichern.<\/figcaption><\/figure>\n
\"\"<\/a>
Vorderansicht nachdem Ihr alles verl\u00f6tet und mit Hei\u00dfkleber isoliert\/gesichert habt.<\/figcaption><\/figure>\n

Danach k\u00f6nnt Ihr die Lichterkette von Au\u00dfen in das Einmachglas einf\u00e4deln bis nur noch das ESP8266-Adapterboard au\u00dferhalb des Einmachglases ist.<\/p>\n

Vor der Inbetriebnahme solltet Ihr nun noch die Tipps aus dem Artikel Eektronik – Inbetriebnahme einer neuen Schaltung<\/a><\/strong><\/em> beachten.<\/p>\n

\n

Mit dem Geh\u00e4useteller das ESP8266-Board verstauen<\/h2>\n

Um das ESP8266-Adapterboard (einigerma\u00dfen) unsichtbar zu verstecken verklebt Ihr dieses mit ein paar Tropfen Hei\u00dfkleber im Geh\u00e4useteller und diesen dann unter dem Einmachglas.<\/p>\n

\"\"<\/a>
Nahaufnahme des Geh\u00e4usetellers.<\/figcaption><\/figure>\n

\"\"<\/a><\/p>\n

\n

Tasmota Firmware flashen<\/h2>\n

Nun ist es an der Zeit die Tasmota-Firmware auf die Lampe zu \u00fcbertragen. Programmiert dazu die Tasmota-Firmware auf das ESP9266-Adapterboard. Wie dies geht ist im Artikel Tasmota – Firmware flashen\u00a0 <\/strong><\/em><\/a>erkl\u00e4rt.<\/p>\n

Im folgenden eine Konfiguration wie ich sie f\u00fcr diese Lampe genutzt habe. In dieser m\u00fcsst Ihr nat\u00fcrlich noch die Zugangsdaten zu Eurem WLAN und ggf. die Zugangsdaten zu Eurem MQTT-Server konfigurieren.<\/p>\n

\/*\r\n  user_config.h - user specific configuration for Sonoff-Tasmota\r\n\r\n  Copyright (C) 2018  Theo Arends\r\n\r\n  This program is free software: you can redistribute it and\/or modify\r\n  it under the terms of the GNU General Public License as published by\r\n  the Free Software Foundation, either version 3 of the License, or\r\n  (at your option) any later version.\r\n\r\n  This program is distributed in the hope that it will be useful,\r\n  but WITHOUT ANY WARRANTY; without even the implied warranty of\r\n  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\r\n  GNU General Public License for more details.\r\n\r\n  You should have received a copy of the GNU General Public License\r\n  along with this program.  If not, see .\r\n*\/\r\n\r\n#ifndef _USER_CONFIG_H_\r\n#define _USER_CONFIG_H_\r\n\r\n\/*********************************************************************************************\r\n * This file consists of TWO sections.\r\n *\r\n * SECTION 1:\r\n * The first section contains PARAMETERS overriding flash settings if define CFG_HOLDER is CHANGED.\r\n * All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.\r\n *   Corresponding MQTT\/Serial\/Console commands are shown in [brackets]\r\n *\r\n * SECTION 2:\r\n * The second section contains Enabled and Disabled FEATURES allowing different program size.\r\n *   Changes in this section do NOT need a change of define CFG_HOLDER.\r\n *\r\n * ATTENTION:\r\n * Users are advised to use the user_config_override.h file for most changes.\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CONFIG_OVERRIDE                      \/\/ Uncomment to use user_config_override.h file. See README.md\r\n\r\n\/*********************************************************************************************\r\n * SECTION 1\r\n * - After initial load any change here only take effect if CFG_HOLDER is changed too\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Master parameter control --------------------\r\n#define CFG_HOLDER             4617              \/\/ [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash\r\n\r\n\/\/ -- Project -------------------------------------\r\n#define PROJECT                \"GluehWuermchenLampe\"          \/\/ PROJECT is used as the default topic delimiter\r\n#define MODULE                 WEMOS      \/\/ [Module] Select default model from sonoff_template.h (Should not be changed)\r\n\r\n#define SAVE_DATA              1                 \/\/ [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)\r\n#define SAVE_STATE             1                 \/\/ [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)\r\n\r\n\/\/ -- Wifi ----------------------------------------\r\n#define WIFI_IP_ADDRESS        \"0.0.0.0\"         \/\/ [IpAddress1] Set to 0.0.0.0 for using DHCP or IP address\r\n#define WIFI_GATEWAY           \"192.168.0.1\"   \/\/ [IpAddress2] If not using DHCP set Gateway IP address\r\n#define WIFI_SUBNETMASK        \"255.255.255.0\"   \/\/ [IpAddress3] If not using DHCP set Network mask\r\n#define WIFI_DNS               \"192.168.0.1\"    \/\/ [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)\r\n\r\n#define STA_SSID1              \"\"                \/\/ [Ssid1] Wifi SSID\r\n#define STA_PASS1              \"\"                \/\/ [Password1] Wifi password\r\n#define STA_SSID2              \"\"                \/\/ [Ssid2] Optional alternate AP Wifi SSID\r\n#define STA_PASS2              \"\"                \/\/ [Password2] Optional alternate AP Wifi password\r\n#define WIFI_CONFIG_TOOL       WIFI_MANAGER         \/\/ [WifiConfig] Default tool if wifi fails to connect\r\n                                                 \/\/   (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)\r\n#define WIFI_CONFIG_NO_SSID    WIFI_WPSCONFIG    \/\/ Default tool if wifi fails to connect and no SSID is configured\r\n                                                 \/\/   (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)\r\n                                                 \/\/   *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***\r\n                                                 \/\/   *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***\r\n                                                 \/\/   *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***\r\n\r\n\/\/ -- Syslog --------------------------------------\r\n#define SYS_LOG_HOST           \"\"                \/\/ [LogHost] (Linux) syslog host\r\n#define SYS_LOG_PORT           514               \/\/ [LogPort] default syslog UDP port\r\n#define SYS_LOG_LEVEL          LOG_LEVEL_NONE    \/\/ [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define SERIAL_LOG_LEVEL       LOG_LEVEL_DEBUG    \/\/ [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define WEB_LOG_LEVEL          LOG_LEVEL_INFO    \/\/ [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n\r\n\/\/ -- Ota -----------------------------------------\r\n#define OTA_URL                \"http:\/\/sonoff.maddox.co.uk\/tasmota\/sonoff.bin\"  \/\/ [OtaUrl]\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_USE               1                 \/\/ [SetOption3] Select default MQTT use (0 = Off, 1 = On)\r\n\r\n#define MQTT_HOST              \"---\"                \/\/ [MqttHost]\r\n#define MQTT_FINGERPRINT1      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint1]\r\n#define MQTT_FINGERPRINT2      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint2]\r\n#define MQTT_PORT              1883              \/\/ [MqttPort] MQTT port (10123 on CloudMQTT)\r\n#define MQTT_USER              \"DVES_USER\"       \/\/ [MqttUser] MQTT user\r\n#define MQTT_PASS              \"DVES_PASS\"       \/\/ [MqttPassword] MQTT password\r\n\r\n#define MQTT_BUTTON_RETAIN     0                 \/\/ [ButtonRetain] Button may send retain flag (0 = off, 1 = on)\r\n#define MQTT_POWER_RETAIN      0                 \/\/ [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)\r\n#define MQTT_SWITCH_RETAIN     0                 \/\/ [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)\r\n\r\n#define MQTT_STATUS_OFF        \"OFF\"             \/\/ [StateText1] Command or Status result when turned off (needs to be a string like \"0\" or \"Off\")\r\n#define MQTT_STATUS_ON         \"ON\"              \/\/ [StateText2] Command or Status result when turned on (needs to be a string like \"1\" or \"On\")\r\n#define MQTT_CMND_TOGGLE       \"TOGGLE\"          \/\/ [StateText3] Command to send when toggling (needs to be a string like \"2\" or \"Toggle\")\r\n#define MQTT_CMND_HOLD         \"HOLD\"            \/\/ [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like \"HOLD\")\r\n\r\n\/\/ -- MQTT topics ---------------------------------\r\n  \/\/ Example \"tasmota\/bedroom\/%topic%\/%prefix%\/\" up to 80 characers\r\n#define MQTT_FULLTOPIC         \"%prefix%\/%topic%\/\" \/\/ [FullTopic] Subscribe and Publish full topic name - Legacy topic\r\n\r\n\/\/ %prefix% token options\r\n#define SUB_PREFIX             \"cmnd\"            \/\/ [Prefix1] Sonoff devices subscribe to %prefix%\/%topic% being SUB_PREFIX\/MQTT_TOPIC and SUB_PREFIX\/MQTT_GRPTOPIC\r\n#define PUB_PREFIX             \"stat\"            \/\/ [Prefix2] Sonoff devices publish to %prefix%\/%topic% being PUB_PREFIX\/MQTT_TOPIC\r\n#define PUB_PREFIX2            \"tele\"            \/\/ [Prefix3] Sonoff devices publish telemetry data to %prefix%\/%topic% being PUB_PREFIX2\/MQTT_TOPIC\/UPTIME, POWER and TIME\r\n                                                 \/\/   May be named the same as PUB_PREFIX\r\n\/\/ %topic% token options (also ButtonTopic and SwitchTopic)\r\n#define MQTT_TOPIC             PROJECT           \/\/ [Topic] (unique) MQTT device topic, set to 'PROJECT \"_%06X\"' for unique topic including device MAC address\r\n#define MQTT_GRPTOPIC          \"sonoffs\"         \/\/ [GroupTopic] MQTT Group topic\r\n#define MQTT_BUTTON_TOPIC      \"0\"               \/\/ [ButtonTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_BTN_%06X\"' for unique topic including device MAC address\r\n#define MQTT_SWITCH_TOPIC      \"0\"               \/\/ [SwitchTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_SW_%06X\"' for unique topic including device MAC address\r\n#define MQTT_CLIENT_ID         \"DVES_%06X\"       \/\/ [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address\r\n\r\n\/\/ -- MQTT - Telemetry ----------------------------\r\n#define TELE_PERIOD            300               \/\/ [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n#define DOMOTICZ_UPDATE_TIMER  0                 \/\/ [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n#define HOME_ASSISTANT_DISCOVERY_ENABLE   0      \/\/ [SetOption19] Home Assistant Discovery (0 = Disable, 1 = Enable)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define WEB_SERVER             2                 \/\/ [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)\r\n#define WEB_PASSWORD           \"\"                \/\/ [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)\r\n#define FRIENDLY_NAME          \"GluehWuermchenLampe\"          \/\/ [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa\r\n#define EMULATION              EMUL_NONE         \/\/ [Emulation] Select Belkin WeMo (single relay\/light) or Hue Bridge emulation (multi relay\/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)\r\n\r\n\/\/ -- Time - Up to three NTP servers in your region\r\n#define NTP_SERVER1            \"pool.ntp.org\"       \/\/ [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)\r\n#define NTP_SERVER2            \"nl.pool.ntp.org\"    \/\/ [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)\r\n#define NTP_SERVER3            \"0.nl.pool.ntp.org\"  \/\/ [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)\r\n\r\n\/\/ -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes\r\n#define TIME_DST_HEMISPHERE    North              \/\/ [TimeDst] Hemisphere (0 or North, 1 or South)\r\n#define TIME_DST_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_DST_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_DST_MONTH         Mar                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_DST_HOUR          2                  \/\/ Hour (0 to 23)\r\n#define TIME_DST_OFFSET        +120               \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Time - Start Standard Time and timezone offset from UTC in minutes\r\n#define TIME_STD_HEMISPHERE    North              \/\/ [TimeStd] Hemisphere (0 or North, 1 or South)\r\n#define TIME_STD_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_STD_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_STD_MONTH         Oct                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_STD_HOUR          3                  \/\/ Hour (0 to 23)\r\n#define TIME_STD_OFFSET        +60                \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Location ------------------------------------\r\n#define LATITUDE               48.858360         \/\/ [Latitude] Your location to be used with sunrise and sunset\r\n#define LONGITUDE              2.294442          \/\/ [Longitude] Your location to be used with sunrise and sunset\r\n\r\n\/\/ -- Application ---------------------------------\r\n#define APP_TIMEZONE           1                 \/\/ [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST\/TIME_STD)\r\n#define APP_LEDSTATE           LED_POWER         \/\/ [LedState] Function of led\r\n                                                 \/\/   (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)\r\n#define APP_PULSETIME          0                 \/\/ [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)\r\n#define APP_POWERON_STATE      POWER_ALL_SAVED   \/\/ [PowerOnState] Power On Relay state\r\n                                                 \/\/   (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON)\r\n#define APP_BLINKTIME          10                \/\/ [BlinkTime] Time in 0.1 Sec to blink\/toggle power for relay 1\r\n#define APP_BLINKCOUNT         10                \/\/ [BlinkCount] Number of blinks (0 = 32000)\r\n#define APP_SLEEP              0                 \/\/ [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)\r\n\r\n#define KEY_DEBOUNCE_TIME      50                \/\/ [ButtonDebounce] Number of mSeconds button press debounce time\r\n#define KEY_HOLD_TIME          40                \/\/ [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message\r\n#define SWITCH_DEBOUNCE_TIME   50                \/\/ [SwitchDebounce] Number of mSeconds switch press debounce time\r\n#define SWITCH_MODE            TOGGLE            \/\/ [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE (the wall switch state)\r\n#define WS2812_LEDS            23                \/\/ [Pixels] Number of WS2812 LEDs to start with (max is 512)\r\n\r\n#define TEMP_CONVERSION        0                 \/\/ [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)\r\n#define TEMP_RESOLUTION        1                 \/\/ [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature\r\n#define HUMIDITY_RESOLUTION    1                 \/\/ [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity\r\n#define PRESSURE_RESOLUTION    1                 \/\/ [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure\r\n#define ENERGY_RESOLUTION      3                 \/\/ [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh\r\n\r\n\/*********************************************************************************************\r\n * END OF SECTION 1\r\n *\r\n * SECTION 2\r\n * - Enable a feature by removing both \/\/ in front of it\r\n * - Disable a feature by preceding it with \/\/\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Localization --------------------------------\r\n  \/\/ If non selected the default en-GB will be used\r\n\/\/#define MY_LANGUAGE            bg-BG           \/\/ Bulgarian in Bulgaria\r\n\/\/#define MY_LANGUAGE            cs-CZ           \/\/ Czech in Czech\r\n#define MY_LANGUAGE            de-DE           \/\/ German in Germany\r\n\/\/#define MY_LANGUAGE            el-GR           \/\/ Greek in Greece\r\n\/\/#define MY_LANGUAGE            en-GB           \/\/ English in Great Britain. Enabled by Default\r\n\/\/#define MY_LANGUAGE            es-AR           \/\/ Spanish in Argentina\r\n\/\/#define MY_LANGUAGE            fr-FR           \/\/ French in France\r\n\/\/#define MY_LANGUAGE            hu-HU           \/\/ Hungarian in Hungary\r\n\/\/#define MY_LANGUAGE            it-IT           \/\/ Italian in Italy\r\n\/\/#define MY_LANGUAGE            nl-NL           \/\/ Dutch in the Netherlands\r\n\/\/#define MY_LANGUAGE            pl-PL           \/\/ Polish in Poland\r\n\/\/#define MY_LANGUAGE            pt-BR           \/\/ Portuguese in Brazil\r\n\/\/#define MY_LANGUAGE            pt-PT           \/\/ Portuguese in Portugal\r\n\/\/#define MY_LANGUAGE            ru-RU           \/\/ Russian in Russia\r\n\/\/#define MY_LANGUAGE            tr-TR           \/\/ Turkish in Turkey\r\n\/\/#define MY_LANGUAGE            uk-UK           \/\/ Ukrainian in Ukrain\r\n\/\/#define MY_LANGUAGE            zh-CN           \/\/ Chinese (Simplified) in China\r\n\/\/#define MY_LANGUAGE            zh-TW           \/\/ Chinese (Traditional) in Taiwan\r\n\r\n\/\/ -- Wifi Config tools ---------------------------\r\n\/\/#define USE_WPS                                  \/\/ Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))\r\n\/\/#define USE_SMARTCONFIG                          \/\/ Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)\r\n\r\n\/\/ -- OTA -----------------------------------------\r\n#define USE_ARDUINO_OTA                          \/\/ Add optional support for Arduino OTA (+13k code)\r\n\r\n\/*-------------------------------------------------------------------------------------------*\r\n * Select ONE of possible three MQTT library types below\r\n*-------------------------------------------------------------------------------------------*\/\r\n  \/\/ Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.\r\n#define MQTT_LIBRARY_TYPE      MQTT_PUBSUBCLIENT   \/\/ Use PubSubClient library\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_TASMOTAMQTT    \/\/ Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_ESPMQTTARDUINO \/\/ Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_TELE_RETAIN     0                   \/\/ Tele messages may send retain flag (0 = off, 1 = on)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n\/\/#define USE_DOMOTICZ                             \/\/ Enable Domoticz (+6k code, +0.3k mem)\r\n  #define DOMOTICZ_IN_TOPIC    \"domoticz\/in\"     \/\/ Domoticz Input Topic\r\n  #define DOMOTICZ_OUT_TOPIC   \"domoticz\/out\"    \/\/ Domoticz Output Topic\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n\/\/#define USE_HOME_ASSISTANT                       \/\/ Enable Home Assistant Discovery Support (+2k code)\r\n  #define HOME_ASSISTANT_DISCOVERY_PREFIX \"homeassistant\"  \/\/ Home Assistant discovery prefix\r\n\r\n\/\/ -- MQTT - TLS ----------------------------------\r\n  \/\/ !!! TLS uses a LOT OF MEMORY so be careful to enable other options at the same time !!!\r\n\/\/#define USE_MQTT_TLS                             \/\/ Use TLS for MQTT connection (+53k code, +15k mem)\r\n\r\n\/\/ -- KNX IP Protocol -----------------------------\r\n\/\/#define USE_KNX                                  \/\/ Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)\r\n\/\/  #define USE_KNX_WEB_MENU                       \/\/ Enable KNX WEB MENU (+8.3k code, +144 mem)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define USE_WEBSERVER                            \/\/ Enable web server and Wifi Manager (+66k code, +8k mem)\r\n  #define WEB_PORT             80                \/\/ Web server Port for User and Admin mode\r\n  #define WEB_USERNAME         \"admin\"           \/\/ Web server Admin mode user name\r\n  #define USE_EMULATION                          \/\/ Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)\r\n\r\n\/\/ -- mDNS ----------------------------------------\r\n#define USE_DISCOVERY                            \/\/ Enable mDNS for the following services (+8k code, +0.3k mem)\r\n  #define WEBSERVER_ADVERTISE                    \/\/ Provide access to webserver by name .local\/\r\n  #define MQTT_HOST_DISCOVERY                    \/\/ Find MQTT host server (overrides MQTT_HOST if found)\r\n\r\n\/\/ -- Time ----------------------------------------\r\n#define USE_TIMERS                               \/\/ Add support for up to 16 timers (+2k2 code)\r\n  #define USE_TIMERS_WEB                         \/\/ Add timer webpage support (+4k5 code)\r\n  #define USE_SUNRISE                            \/\/ Add support for Sunrise and sunset tools (+16k)\r\n    #define SUNRISE_DAWN_ANGLE DAWN_NORMAL       \/\/ Select desired Dawn Angle from (DAWN_NORMAL, DAWN_CIVIL, DAWN_NAUTIC, DAWN_ASTRONOMIC)\r\n\r\n\/\/ -- Rules ---------------------------------------\r\n#define USE_RULES                                \/\/ Add support for rules (+4k4 code)\r\n\r\n\/\/ -- Internal Analog input -----------------------\r\n\/\/#define USE_ADC_VCC                              \/\/ Display Vcc in Power status. Disable for use as Analog input on selected devices\r\n\r\n\/\/ -- One wire sensors ----------------------------\r\n                                                 \/\/ WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors\r\n\/\/#define USE_DS18x20                              \/\/ Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)\r\n\/\/#define USE_DS18x20_LEGACY                       \/\/ Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)\r\n\r\n\/\/ -- I2C sensors ---------------------------------\r\n#define USE_I2C                                  \/\/ I2C using library wire (+10k code, 0k2 mem, 124 iram)\r\n\r\n#ifdef USE_I2C\r\n\/\/  #define USE_SHT                                \/\/ Enable SHT1X sensor (+1k4 code)\r\n\/\/  #define USE_HTU                                \/\/ Enable HTU21\/SI7013\/SI7020\/SI7021 sensor (I2C address 0x40) (+1k5 code)\r\n    #define USE_BMP                                \/\/ Enable BMP085\/BMP180\/BMP280\/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)\r\n\/\/  #define USE_BME680                           \/\/ Enable support for BME680 sensor using Bosch BME680 library (+4k code)\r\n\/\/  #define USE_BH1750                             \/\/ Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)\r\n\/\/  #define USE_VEML6070                           \/\/ Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)\r\n\/\/  #define USE_ADS1115                            \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)\r\n\/\/  #define USE_ADS1115_I2CDEV                     \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)\r\n\/\/  #define USE_INA219                             \/\/ Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)\r\n\/\/  #define USE_SHT3X                              \/\/ Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)\r\n\/\/  #define USE_TSL2561                            \/\/ Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)\r\n\/\/  #define USE_MGS                                \/\/ Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)\r\n\/\/  #define MGS_SENSOR_ADDR    0x04              \/\/ Default Mutichannel Gas sensor i2c address\r\n\/\/  #define USE_SGP30                              \/\/ Enable SGP30 sensor (I2C address 0x58) (+1k1 code)\r\n\/\/  #define USE_SI1145                             \/\/ Enable SI1145\/46\/47 sensor (I2C address 0x60) (+1k code)\r\n\/\/  #define USE_LM75AD                             \/\/ Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)\r\n\/\/  #define USE_APDS9960                           \/\/ Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)\r\n\/\/  #define USE_MCP230xx                           \/\/ Enable MCP23008\/MCP23017 for GP INPUT ONLY (I2C addresses 0x20 - 0x27) providing command Sensor29 for configuration (+4k7 code)\r\n\/\/    #define USE_MCP230xx_OUTPUT                  \/\/ Enable MCP23008\/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)\r\n\/\/    #define USE_MCP230xx_DISPLAYOUTPUT           \/\/ Enable MCP23008\/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)\r\n  #define USE_MPR121                             \/\/ Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)\r\n\/\/  #define USE_CCS811                             \/\/ Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)\r\n\/\/  #define USE_MPU6050                            \/\/ Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)\r\n#endif  \/\/ USE_I2C\r\n\r\n\/\/ -- SPI sensors ---------------------------------\r\n\/\/#define USE_SPI                                  \/\/ SPI using library TasmotaTFT\r\n\r\n#ifdef USE_SPI\r\n\r\n#endif  \/\/ USE_SPI\r\n\r\n\/\/ -- Serial sensors ------------------------------\r\n#define USE_MHZ19                                \/\/ Add support for MH-Z19 CO2 sensor (+2k code)\r\n#define USE_SENSEAIR                             \/\/ Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)\r\n  #define CO2_LOW              800               \/\/ Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n  #define CO2_HIGH             1200              \/\/ Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n#define USE_PMS5003                              \/\/ Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)\r\n#define USE_NOVA_SDS                             \/\/ Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)\r\n#define USE_PZEM004T                             \/\/ Add support for PZEM004T Energy monitor (+2k code)\r\n#define USE_SERIAL_BRIDGE                        \/\/ Add support for software Serial Bridge (+0k8 code)\r\n\/\/#define USE_SDM120                               \/\/ Add support for Eastron SDM120-Modbus energy meter (+1k7 code)\r\n  #define SDM120_SPEED         9600              \/\/ SDM120-Modbus RS485 serial speed (default: 2400 baud)\r\n\/\/#define USE_SDM630                               \/\/ Add support for Eastron SDM630-Modbus energy meter (+2k code)\r\n  #define SDM630_SPEED         9600              \/\/ SDM630-Modbus RS485 serial speed (default: 9600 baud)\r\n\r\n\/\/ -- Low level interface devices -----------------\r\n\/\/#define USE_IR_REMOTE                            \/\/ Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)\r\n\/\/  #define USE_IR_HVAC                            \/\/ Support for HVAC system using IR (+2k code)\r\n\/\/  #define USE_IR_RECEIVE                         \/\/ Support for IR receiver (+5k5 code, 264 iram)\r\n\r\n#define USE_WS2812                               \/\/ WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by \/\/\r\n  #define USE_WS2812_CTYPE     NEO_GRB           \/\/ WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)\r\n\/\/  #define USE_WS2812_DMA                         \/\/ DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow\r\n\r\n\/\/#define USE_ARILUX_RF                            \/\/ Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))\r\n\r\n\/\/#define USE_SR04                                 \/\/ Add support for HC-SR04 ultrasonic devices (+1k code)\r\n\r\n\/\/#define USE_TM1638                               \/\/ Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)\r\n\r\n#define USE_RF_FLASH                             \/\/ Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)\r\n\r\n\/*********************************************************************************************\r\n * Debug features are only supported in development branch\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_DEBUG_DRIVER                         \/\/ Use xdrv_99_debug.ino providing commands CpuChk, CfgXor, CfgDump, CfgPeek and CfgPoke\r\n\r\n\/*********************************************************************************************\r\n * Optional firmware configurations\r\n * Select none or just one for optional features and sensors as configured in sonoff_post.h\r\n * See RELEASENOTES.md for selected features\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CLASSIC                              \/\/ Create sonoff-classic with initial configuration tools WPS, SmartConfig and WifiManager\r\n\/\/#define USE_SENSORS                              \/\/ Create sonoff-sensors with useful sensors enabled\r\n\/\/#define USE_KNX_NO_EMULATION                     \/\/ Create sonoff-knx with KNX but without Emulation\r\n\/\/#define BE_MINIMAL                               \/\/ Create sonoff-minimal as intermediate firmware for OTA-MAGIC\r\n\r\n\/*********************************************************************************************\r\n * No user configurable items below\r\n*********************************************************************************************\/\r\n\r\n#if defined(USE_MQTT_TLS) && defined(USE_WEBSERVER)\r\n  #error \"Select either USE_MQTT_TLS or USE_WEBSERVER as there is just not enough memory to play with\"\r\n#endif\r\n\r\n#endif  \/\/ _USER_CONFIG_H_<\/pre>\n
\n
ESP8266 mit Tasmota-Firmware konfigurieren<\/h2>\n
Um die angeschlossene Lichterkette nun auch aus der Tasmota-Firmware ansteuern zu k\u00f6nnen muss diese nun noch korrekt konfiguriert werden.<\/p>\n
\"\"<\/a>
Um die Tasmota-Firmware zu konfigurieren wechselt Ihr von der Startseite der Konfigurationsoberfl\u00e4che in das Men\u00fc „Einstellungen“.<\/figcaption><\/figure>\n
\"\"<\/a>
Dort klickt Ihr dann auf „Ger\u00e4t konfigurieren“.<\/figcaption><\/figure>\n
\"\"<\/a>
Nun seid Ihr in der \u00dcbersicht angekommen in der sich die einzelnen Funktionen zu den Ein- und Ausgabe-Pins festlegen lassen. Da der MOSFET, welcher die Lichterkette steuert, an dem Pin D5 angeschlossen ist, wird nun die Funktion dieses Pins eingestellt. Klickt dazu auf das Drop-Down-Feld in der Zeile des Pins „D5 GPIO14 Sensor“…<\/figcaption><\/figure>\n
\"\"<\/a><\/p>\n
\"\"<\/a>
…und w\u00e4hlt „PWM1“ aus und klickt auf „Speichern“.<\/figcaption><\/figure>\n
\"\"<\/a>
Die Tasmota-Firmware startet daraufhin neu um die Einstellungen zu \u00fcbernehmen. Nach ein paar Sekunden sollte sie wieder erreichbar sein. Falls nicht: Trennt einmal die Stromversorgung und stell sie wieder her.<\/figcaption><\/figure>\n
\"\"<\/a>
Zur\u00fcck im Hauptmen\u00fc habt Ihr nun die M\u00f6glichkeit Eure selbstgebaute Einmachglas-Lampe ein- und auszuschalten sowie \u00fcber den Schieberegler die Helligkeit einzustellen.<\/figcaption><\/figure>\n
\n
Viel Spa\u00df mit dem Projekt<\/h2>\r\n
Ich hoffe bei euch hat alles wie beschrieben funktioniert. Falls nicht oder ihr Fragen oder Anregungen habt lasst es mich in den Kommentaren bitte wissen. Ich trage dies dann ggf. in den Artikel nach.
Auch Ideen f\u00fcr neue Projekte sind immer gerne willkommen. \ud83d\ude42<\/p>\r\n
P.S. Viele dieser Projekte - besonders die Hardwareprojekte - kosten viel Zeit und Geld. Nat\u00fcrlich mache ich das weil ich Spa\u00df daran habe, aber wenn Du es cool findest, dass ich die Infos dazu mit Euch teile, w\u00fcrde ich mich \u00fcber eine kleine Spende an die Kaffeekasse freuen. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>\n","protected":false},"excerpt":{"rendered":"
Neulich habe ich in den Regalen eines gro\u00dfen schwedischen M\u00f6belhauses das unten abgebildete Einmachglas gefunden. Einmachgl\u00e4ser sind keine Erfindung aus Schweden. Ich w\u00fcrde fast behaupten, dass sie irgendwo in jedem […]<\/p>\n","protected":false},"author":1,"featured_media":1747,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[56,86,61,148,120],"tags":[27,33,124,89,114,139,51,131],"class_list":["post-1731","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-arduino","category-elektronik","category-smarthome","category-tagesprojekt5h","category-tasmota","tag-aktoren","tag-automatisierung","tag-diy-lampe","tag-lampe","tag-nodered","tag-retro","tag-smarthome","tag-tasmota"],"yoast_head":"\nHowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-02-27T17:37:21+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-03-25T19:34:11+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"3024\" \/>\n\t<meta property=\"og:image:height\" content=\"4032\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Verfasst von\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"23\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Tasmota – SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen\",\"datePublished\":\"2019-02-27T17:37:21+00:00\",\"dateModified\":\"2020-03-25T19:34:11+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/\"},\"wordCount\":1230,\"commentCount\":2,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1\",\"keywords\":[\"Aktoren\",\"Automatisierung\",\"DIY-Lampe\",\"Lampe\",\"NodeRed\",\"Retro\",\"SmartHome\",\"Tasmota\"],\"articleSection\":[\"Arduino\",\"Elektronik\",\"SmartHome\",\"Tagesprojekt(<5h)\",\"Tasmota\"],\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/\",\"name\":\"HowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1\",\"datePublished\":\"2019-02-27T17:37:21+00:00\",\"dateModified\":\"2020-03-25T19:34:11+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1\",\"width\":3024,\"height\":4032},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/tasmota-gluehwuermchen-lichterkette-selber-bauen\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Tasmota – SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/","og_locale":"de_DE","og_type":"article","og_title":"HowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2019-02-27T17:37:21+00:00","article_modified_time":"2020-03-25T19:34:11+00:00","og_image":[{"width":3024,"height":4032,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","type":"image\/jpeg"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Verfasst von":"Fab","Gesch\u00e4tzte Lesezeit":"23\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Tasmota – SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen","datePublished":"2019-02-27T17:37:21+00:00","dateModified":"2020-03-25T19:34:11+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/"},"wordCount":1230,"commentCount":2,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","keywords":["Aktoren","Automatisierung","DIY-Lampe","Lampe","NodeRed","Retro","SmartHome","Tasmota"],"articleSection":["Arduino","Elektronik","SmartHome","Tagesprojekt(<5h)","Tasmota"],"inLanguage":"de","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/","url":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/","name":"HowTo: Tasmota - SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","datePublished":"2019-02-27T17:37:21+00:00","dateModified":"2020-03-25T19:34:11+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","width":3024,"height":4032},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/de_de\/tasmota-gluehwuermchen-lichterkette-selber-bauen\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Tasmota – SmartHome Gl\u00fchW\u00fcrmchen Lampe selber bauen"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","description":"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-tasmota-gluehwuermchen-lichterkette-selber-bauen-20181002-010650-e1538997077390.jpg?fit=3024%2C4032&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-rV","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":2447,"url":"https:\/\/nerdiy.de\/de_de\/ein-eigenes-opensource-smarthome-aufbauen\/","url_meta":{"origin":1731,"position":0},"title":"Ein eigenes OpenSource-SmartHome aufbauen","author":"Fab","date":"28. Februar 2019","format":false,"excerpt":"Ich muss zugeben ich habe noch nicht die perfekte L\u00f6sung gefunden um alle SmartHome-relevanten Artikel \u00fcbersichtlich aufzulisten. Um bis dahin zumindest etwas \u00dcbersicht in die verf\u00fcgbaren SmartHome-Artikel zu bringen kommt hier die folgende Liste mit allen aktuell verf\u00fcgbaren und teilweise geplanten Artikeln. :) Allgemein\/Diverses NodeRed \u2013 Installation von NodeRed auf\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/de_de\/category\/abendprojekt2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":8400,"url":"https:\/\/nerdiy.de\/de_de\/howto-tasmota-sonoff-ifan03-mit-tasmota-firmware-flashen\/","url_meta":{"origin":1731,"position":1},"title":"HowTo: Tasmota – Sonoff iFan03 mit Tasmota firmware flashen","author":"Fab","date":"11. November 2020","format":false,"excerpt":"Im Sonoff-Sortiment gibt es einige praktische Module. Dazu z\u00e4hlt auch das \"Sonoff iFan03\". Dies ist eigentlich dazu gedacht um Deckenventilatoren und eine angeschlossene Lampe \u00fcber Fernbedienung und WLAN steuern zu k\u00f6nnen. Wie viele andere Sonoff-Module l\u00e4sst sich auch das iFan03-Modul mit der kostenlosen Tasmota-Firmware ausstatten. Wie Ihr die Tasmota -\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/de_de\/category\/abendprojekt2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-sonoff-ifan03-mit-tasmota-firmware-flashen-20200421-135126.jpg?fit=900%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-sonoff-ifan03-mit-tasmota-firmware-flashen-20200421-135126.jpg?fit=900%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-sonoff-ifan03-mit-tasmota-firmware-flashen-20200421-135126.jpg?fit=900%2C1200&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-sonoff-ifan03-mit-tasmota-firmware-flashen-20200421-135126.jpg?fit=900%2C1200&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":6273,"url":"https:\/\/nerdiy.de\/de_de\/howto-nodered-facebook-lampe-ansteuern\/","url_meta":{"origin":1731,"position":2},"title":"HowTo: Node Red – Facebook(*)-Lampe ansteuern","author":"Fab","date":"3. Juni 2019","format":false,"excerpt":"In dem Artikel NodeRed\/Tasmota - Eine Facebook(*)-Icon-Lampe bauen ist erkl\u00e4rt wie man sich eine eigene Facebook(*)-Lampe bauen kann. Ziel ist es diese sp\u00e4ter mit Eurem SmartHome zu verkn\u00fcpfen und beispielsweise leuchten zu lassen sobald neue Benachrichtigungen f\u00fcr Euch verf\u00fcgbar sind. Mit folgendem NodeCode k\u00f6nnt Ihr Eure selbstgebaute Facebook(*)-Lampe nun testen.\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/de_de\/category\/abendprojekt2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":17875,"url":"https:\/\/nerdiy.de\/de_de\/howto-fritz-box-ain-eures-smarthome-geraets-herausfinden\/","url_meta":{"origin":1731,"position":3},"title":"HowTo: Fritz Box – AIN Eures SmartHome Ger\u00e4ts herausfinden","author":"Fab","date":"12. Januar 2022","format":false,"excerpt":"SmartHome Ger\u00e4te die mit der FRITZ!Box kompatibel sind werden \u00fcber eine AIN angesprochen. Diese AIN ist eine Eindeutige Identifikationsnummer, welche dem jeweiligen Ger\u00e4t zugewiesen ist. Wenn Ihr zum Beispiel mithilfe von Node Red die Temperatur eines Fritz DECT Heizk\u00f6rperthermostats einstellen oder eine FRITZ!DECT 500 Smart Home Lampe ein- und ausschalten\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/de_de\/category\/abendprojekt2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/11\/www.nerdiy.de-howto-nodered-fritzdect-500-rgb-lampe-mithilfe-von-nodered-und-fritzbox-steuern-firefox-6gu6z1oyiz.png?fit=1100%2C791&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/11\/www.nerdiy.de-howto-nodered-fritzdect-500-rgb-lampe-mithilfe-von-nodered-und-fritzbox-steuern-firefox-6gu6z1oyiz.png?fit=1100%2C791&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/11\/www.nerdiy.de-howto-nodered-fritzdect-500-rgb-lampe-mithilfe-von-nodered-und-fritzbox-steuern-firefox-6gu6z1oyiz.png?fit=1100%2C791&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/11\/www.nerdiy.de-howto-nodered-fritzdect-500-rgb-lampe-mithilfe-von-nodered-und-fritzbox-steuern-firefox-6gu6z1oyiz.png?fit=1100%2C791&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/11\/www.nerdiy.de-howto-nodered-fritzdect-500-rgb-lampe-mithilfe-von-nodered-und-fritzbox-steuern-firefox-6gu6z1oyiz.png?fit=1100%2C791&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2618,"url":"https:\/\/nerdiy.de\/de_de\/nodered-tasmota-eine-facebook-icon-lampe-bauen\/","url_meta":{"origin":1731,"position":4},"title":"HowTo: Node Red \/ Tasmota – Eine Facebook(*)-Icon-Lampe bauen","author":"Fab","date":"27. Februar 2019","format":false,"excerpt":"Nachdem ich vor kurzem einen Weg gefunden habe Benachrichtigungen von meinem Handy an mein SmartHome weiterzuleiten habe ich mir nun ein paar M\u00f6glichkeiten \u00fcberlegt wie man dies m\u00f6glich \"sinnvoll\" einsetzen kann. Zuerst hatte ich mit verschiedenen Blinkmustern der Lampen in meinem SmartHome experimentiert. Blinkt meine Mini-Lichterkette also drei Mal ist\u2026","rel":"","context":"In "3D-Druck"","block_context":{"text":"3D-Druck","link":"https:\/\/nerdiy.de\/de_de\/category\/3d-druck\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2456,"url":"https:\/\/nerdiy.de\/de_de\/nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen\/","url_meta":{"origin":1731,"position":5},"title":"HowTo: Node Red \/ Tasmota – Ein „Tot-Mann-Schalter“ oder wie man das ausbleiben von Status-Nachrichten als Ereignis nutzen","author":"Fab","date":"28. Februar 2019","format":false,"excerpt":"Ich muss zugeben ich hab sie noch nie gesehen, aber es soll in Z\u00fcgen so genannte Tot-Mann-Schalter geben. Diese Schalter mit dem etwas makaberen Namen sind eine ganze sinnige Erfindung. Diese Schalter m\u00fcssen vom Zugf\u00fchrer innerhalb einer gewissen Zeit immer wieder gedr\u00fcckt werden. Vergisst der Zugf\u00fchrer dies, zum Beispiel weil\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/de_de\/category\/abendprojekt2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=700%2C400&ssl=1 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/posts\/1731","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/comments?post=1731"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/posts\/1731\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/media\/1747"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/media?parent=1731"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/categories?post=1731"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/de_de\/wp-json\/wp\/v2\/tags?post=1731"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}