Nerdiy.com - Nerdy DIY HowTo's about electronics, 3D printing and more.
Nerdiy.de is all about electronics, DIY, 3D printing, smart home and many other technical topics.
The PCB Design category contains articles, news and tips about PCB design.
The idea for the pxlDigit_PCB came to me during the construction of the pxlDigit (article here: https://nerdiy.de/howto-elektronik-sieben-segment-ziffer-pxldigit-aus-ws2812-leds-bauen/). There the pxlDigit is built from single WS2812 LED segments. For this, the LEDs must first be inserted into the 3D [...].
Weiterlesen
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand I was always looking for a universal and easy to program remote control [...]
Weiterlesen
I think it's time again for a little news article in which I tell you what has happened in the last few weeks and what I'm working on. 🙂 Anemosens […]
Weiterlesen
With the Aenmosens_MCU board, it is possible to use Anemosens as a standalone anemometer that can be used for long-term observations in remote areas (hence the microSD card slot) or as another part of your weather station (hence the RS485 interface) [...]
Weiterlesen
The Anemosens sensor PCB is the basis for the sensor setup of Anemosens a 3D printed anemometer that I developed for the second version of WinDIY. For this purpose on the PCB are [...]
Weiterlesen
The idea for the pxlDigit_PCB came to me during the construction of the pxlDigit (article here: https://nerdiy.de/howto-elektronik-sieben-segment-ziffer-pxldigit-aus-ws2812-leds-bauen/). There the pxlDigit is built from single WS2812 LED segments. For this, the LEDs must first be inserted into the 3D [...].
Weiterlesen
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests this PCB is the heart of several future pxlBlck variants. So far I have used as main MCU for many projects the [...]
Weiterlesen
A few days ago the Hackaday Prize 2021 was announced. Relatively quickly it was clear to me that I would like to try to submit a few of my projects again this year. Thereby [...]
Weiterlesen
Currently I am working on a few PCB projects in which I would like to give you a little insight here 🙂 All in the following presented boards have manufactured at PCBWay.com. These [...]
Weiterlesen
I recently built an exhaust system for my soldering station and the chamber of my 3D printer. The built exhaust system has two connections. One uses a connected hose to suck up the [...]
Weiterlesen
Lately I'm working on several PCB projects of which I want to present a few here. i2c_slider_75 With this PCB I want to reduce the wiring effort of WinDIY a bit. The [...]
Weiterlesen
Currently I am working on the first preparations of a somewhat larger project. For this I need LEDs which shine a little brighter. At the same time I did not want to give up the comfort of the known [...]
Weiterlesen
Since I started two new PCB projects lately, I thought it was about time to report about them here. genCtrl aka "NerdiskeratorController" One [...]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands