Description
With the help of the PrintAirPipe - 125 Air Sensor Segment for the PrintAirPipe System it is possible to measure various properties of the air around the pipe system.
For this purpose, a BME680, a BME280 and one of the available Fermion gas sensors from DF-Robot be installed.
The sensors can then be read out using the SeeedStudio XIAO ESP32 S3 built into the sensor segment. Thanks to the firmware based on the ESPHome framework, the data can easily be forwarded to a SmartHome system or elsewhere and processed accordingly.
This also makes it possible to react to certain values. For example, the supply air path can be shut off after a certain change in air quality has been detected. For this purpose, the PrintAirPipe - ServoValve be used.
Are you looking for other offers for the PrintAirPipe system?
Under Nerdiy.de/papp you will find all available segments.
Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project.
This offer contains the STL files you need to print the 3D printable components for the PrintAirPipe - 125 Air Sensor Segmentst required.
- You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
- Observe the safety instructions linked below during assembly and use: Click here
Additional components are required to build the complete project. A complete list of the required parts can be found here
Required tool:
| Number | Link |
|---|---|
| 1x | Screwdriver set Buy at Amazon |
| 1x | Soldering iron Buy at Amazon |
| 1x | Prusa 3D printer |
Required material:
Gallery
3D printing information
The recommended 3D print settings are listed below.
- Filament type: e.g: PLA
- Layer thickness: 0.2mm
- Infill: 15%
- Wall lines: 2
ESPHome example configuration
You can find an example configuration for ESPHome under the following link:
Videos
No videos are available yet.
Dimensions
The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.
File list
- PrintAirPipe_125mm_air_sensor_segment_insert_X.stl
- PrintAirPipe_125mm_co_sensor_segment_insert_lid_X.stl
- PrintAirPipe_125mm_sensor_segment_mcu_clamp_V1.0.stl
- PrintAirPipe_125mm_sensor_segment_V1.0.stl
English 
Deutsch 
Français 
Español 
Nederlands
Reviews
There are no reviews yet.