Skip to content
  • Nerdiy.de auf Instagram
  • Nerdiy.de on Facebook
  • Nerdiy.de on YouTube
  • Nerdiy.de auf TikTok
  • Nerdiy.de on Patreon
  • Nerdiy.de on Pinterest
  • Nerdiy.de on Twitter
  • Nerdiy.de on GitHub
  • Nerdiy.de on Reddit
  • Contact Nerdiy.de by email
  • English
    • Deutsch
Nerdiy.de – Nerdy DIY HowTo's about electronic, 3D-printing and more.

Nerdiy.de – Nerdy DIY HowTo's about electronic, 3D-printing and more.

  • Home
  • SmartHome
    • All articles
    • pxlBlck
    • NodeRed
    • ESPEasy
    • FHEM
    • FritzBox
    • MagicMirror
    • Tasmota
  • DIY-Projects
    • Instagram
    • 3D-Printing
      • All articles
      • pxlBlck
      • DIY-Lamp
      • OctoPrint
      • WinDIY
    • Skills
    • Codesnippets
    • Electronics
      • All articles
      • Arduino
      • DIY-Lamp
      • RaspberryPi
      • Tasmota
    • Electrical
  • Forum
  • Blog
  • About
    • News
    • Nerdiy.de in the media
  • Contact
  • Sprache
    • English
    • German

Tag: Internet

HowTo: GitHub – How to copy files from a git-repository to my computer

Posted on 19. March 2019 by Fab

Especially in the open source world you will sooner or later stumble on GitHub, GitLab or similar online-services with “Git” in the name – in search of program code. Behind […]

Read more
Evening project(<2h) / Arduino / Codesnippets / Skills / RaspberryPi Leave a comment

HowTo: FritzBox – Use your own computer via “Linphone” as a VoIP phone-client

Posted on 28. February 2019 by Fab

If you belong to one of the numerous owners of a FritzBox, you can set up another telephone extension on your computer with a few tricks. That means you will […]

Read more
Evening project(<2h) / FritzBox / SmartHome Leave a comment

HowTo: Display/find out the IP address of the devices in the network

Posted on 15. February 2019 by Fab

Especially if you are a bit more concerned with the Internet, network or your own SmartHome, sooner or later you will face the problem of finding out the IP addresses […]

Read more
Evening project(<2h) / RaspberryPi / SmartHome Leave a comment

HowTo: RaspberryPi – Install MQTT server on the RaspberryPi

Posted on 22. February 2018 by Fab

MQTT (Message Queue Telemetry Transport) is the protocol that is becoming more and more important in the world of the Internet of Things. It is very easy to exchange different […]

Read more
Evening project(<2h) / NodeRed / RaspberryPi / SmartHome / FHEM Leave a comment

HowTo: RaspberryPi – Controlling the RaspberryPi via SSH

Posted on 22. February 2018 by Fab

The big advantage of the RaspberryPi is not only that it is small, compact and relatively cheap, but also that it can be easily remotely operated from another computer. There […]

Read more
Evening project(<2h) / RaspberryPi Leave a comment

HowTo: WinRar? WinZip? WinWhat? – Darling I shrunk the files

Posted on 22. February 2018 by Fab

I just do not want to explain things that are very complicated. I think it is also important to explain things that are now somehow part of the basic computer […]

Read more
Evening project(<2h) / Spoon / Basics Leave a comment

HowTo: FHEM – Installation on the RaspberryPi

Posted on 21. February 2018 by Fab

A term that is more often stumbled upon in everyday life is “SmartHome”. But what is behind it? And do I really need that? Smart home (= intelligent home) is […]

Read more
RaspberryPi / SmartHome / Day project (<5h) / FHEM Leave a comment

Search

Language

English EN Deutsch DE

Support me

If you want to support Nerdiy.de in continuing to offer useful projects, you can do so via one of the following buttons. 🙂

Falls Ihr Nerdiy.de dabei unterstützen wollt, weiterhin nützliche Projekte anbieten zu können, könnt Ihr das über einen der folgenden Button machen. 🙂

Buy Me a Coffee at ko-fi.com

Navigation

  • Home
  • SmartHome
    • All articles
    • pxlBlck
    • NodeRed
    • ESPEasy
    • FHEM
    • FritzBox
    • MagicMirror
    • Tasmota
  • DIY-Projects
    • Instagram
    • 3D-Printing
      • All articles
      • pxlBlck
      • DIY-Lamp
      • OctoPrint
      • WinDIY
    • Skills
    • Codesnippets
    • Electronics
      • All articles
      • Arduino
      • DIY-Lamp
      • RaspberryPi
      • Tasmota
    • Electrical
  • Forum
  • Blog
  • About
    • News
    • Nerdiy.de in the media
  • Contact
  • Sprache
    • English
    • German

Login

Log In

Register Lost Password

Instagram

If you want to keep up with all current developments, follow Nerdiy.de on Instagram.

nerdiy.de

🇬🇧 Here is a short summary of the structure 🇬🇧 Here is a short summary of the structure of the bracket for the new controller board of my #pcknplc machine. The board is mounted on the base plate using a 3D printed bracket, @official_ruthex threaded inserts and a few screws. 🙃

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Hier eine kleine Zusammenfassung vom Aufbau der Halterung für das neue controller Board meiner #pcknplc Maschine. Das Board wird mithilfe einer 3D gedruckten Halterung, @official_ruthex Gewindeeinsätzen und ein paar Schrauben auf der Basisplatte montiert. 🙃

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #physics #threadedinsert #picknplace #DIY #3dprinting #soldering #science #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #automation #motor #electricalengineering #iot #espeasy #pickandplace
🇬🇧 One part that I underestimated when setti 🇬🇧 One part that I underestimated when setting up the #pcknplc machine is the necessary camera technology. This part is actually very important. This is because the component positions on the PCBs and the orientation of the picked components are recognized by the integrated cameras. During the research for the necessary components I thought more like "Oh, it has a 2K resolution. That should fit." I didn't pay much attention to the focal length or other data of the built-in lenses. The lens supplied is "only" suitable for "standard webcam" scenarios and thus has a relatively large field of view, for example. However, this also results in a lower point density. Fortunately, these lenses can be exchanged. 😎 So I ordered lenses with different focal lengths and will now experiment with these to find the one that fits best. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Einen Teil den ich beim Aufbau der #pcknplc Maschine sehr unterschätzt habe ist die notwendige Kameratechnik. Dabei ist gerade dieser Teil sehr wichtig. Denn darüber werden die Bauteil-Positionen auf den PCBs und auch die Orientierung der aufgenommenen Bauteile erkannt. Während der Recherche für die notwendigen Bauteile dachte ich mehr nach dem Motto "Ach die hat eine 2K Auflösung. Das sollte passen.". Weder habe ich auf die Brennweite noch andere Daten der verbauten Objektive geachtet. Das mitgelieferte Objektiv eignet sich nämlich "nur" gut für "Standard-Webcam"-Szenarien und hat so zum Beispiel ein relativ großes Sichtfeld. Dadurch aber auch eine geringere Punktdichte. Glücklicherweise lassen sich diese Objektive aber austauschen. 😎 Also habe ich Objektive mit unterschiedlichen Brennweiten bestellt und werde nun mal etwas experimentieren welches Objektiv am besten passt. 🙃 ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #optic #physics #science #DIY #3dprinting #soldering #pickandplace #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #picknplace #electricalengineering #iot #espeasy #camera
🇬🇧 The tip holder is now mounted on the pick 🇬🇧 The tip holder is now mounted on the pick and place machine. 🙃 So far I have only bought four tips, so the other four holders are still empty. Now the position of the individual tips needs to be calibrated and set. Many thanks to the people at @openpnp for providing such an extensive and good software for this job! 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Die Nozzle-Halterung ist nun auf der pick and place Maschine montiert. 🙃 Bisher habe ich nur vier Spitzen gekauft, deswegen sind die übrigen vier Halterungen noch leer. Nun müssen die Position der einzelnen Spitzen noch kalibriert und eingestellt werden. Vielen Dank an die Leute von @openpnp dass sie so eine umfangreiche und gute software zur Verfügung stellen! 🙃 ⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #automation #juki #science #DIY #3dprinting #soldering #picknplace #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #physics #motor #electricalengineering #iot #espeasy #pickandplace
🇬🇧 As an MCU for one of my projects, I wante 🇬🇧 As an MCU for one of my projects, I wanted to use the ESP8285-01F first. Actually a really practical version of the ESP8266, as it has everything you (usually) need on an area of ​​10x11mm. The only problem is that it has a slightly smaller flash of 8Mbit than you are used to from the ESPs. Admittedly a luxury problem. Unfortunately, ESPEasy, for example, can only be installed on the ESP8285 in a very slimmed-down form with this amount of flash. Because of that, I'll probably switch to a different MCU. I am playing with the idea of ​​banning the ESP8266 boards completely from my projects and only using the ESP32 boards. Financially there is hardly a big difference between the boards and relative to that the ESP32 has a lot of additional features. On the other hand, the ESP8266 is sufficient for most tasks (apart from this specific case). What do you think? Would you rather dimension it appropriately or plan power reserves for "just in case"? 🙃⁣
BTW: The awesome pcb is made by @pcbway thanks for that! 😍
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #esp32 #smd #physics #DIY #3dprinting #soldering #science #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #espressif #motor #electricalengineering #iot #espeasy #smd
🇬🇧 The guys at @andonstar.microscope sent me 🇬🇧 The guys at @andonstar.microscope sent me one of their digital microscopes to test it. That came right to check the soldered connections on the board for the #servoDigit controllerBoard made by @pcbway. On the pictures you can see the individual components and then the enlarged view. Especially with the micro USB connection it is very practical to be able to control the soldered pins. Otherwise, an APDS-9960 gesture sensor, a TSL2561 brightness sensor and a 3W RGBW Led can be seen in the photos. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Die Leute von @andonstar.microscope haben mir eines Ihrer digitalen Mikroskope zum testen geschickt. Das kann ich gut gebrauchen und habe damit direkt mal die Lötverbindungen auf der von @pcbway gefertigten Platine für das #servoDigit controllerBoard überprüft. Auf den Bildern könnt Ihr die einzelnen Bauelemente und dann die jeweils vergröserte Ansicht sehen. Besonders bei dem micro USB Anschluss ist es sehr praktisch so die Lötverbindung kontrollieren zu können.⁣
Ansonsten sind auf den Fotos ein APDS-9960 Gestensensor, ein TSL2561 Helligkeitssensor und eine 3W RGBW Led zu erkennen. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #andonstar #macrophotography #pcbway #DIY #3dprinting #soldering #sensor #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #microscope
🇬🇧 In the meantime I have finished the holde 🇬🇧 In the meantime I have finished the holder for the tips of the #pcknplc machine. There is space for up to eight tips. Each individual tip is pulled into the correct end position by a small magnet. I've tried different versions and especially experimented with the distance between the magnets and the tips. There should be enough force on the tips to pull them into the correct position. At the same time, they should not be magnetized too much. In this way, I want to avoid that the potentially magnetized tips will attract components when they are not supposed to. 🙃 The holder is required later - depending on the component size - to automatically attach the correct tip to the pick head. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Mittlerweile habe ich auch die Halterung für die Spitzen der #pcknplc Maschine fertig gebaut. Darin finden bis zu acht Spitzen Platz. Jede einzelne Spitze wird über einen kleinen Magneten in die richtige Endposition gezogen. Ich habe verschiedene Versionen ausprobiert und dabei besonders mit dem Abstand der Magnete zu den Spitzen experimentiert. Auf die Spitzen soll nämlich genug Kraft wirken um sie in die richtige Position zu ziehen. Gleichzeitig sollen sie dadurch aber nicht zu stark magnetisiert werden. So will ich vermeiden, dass die potentiell magnetisierten Spitzen später Bauteile anziehen, wenn sie es nicht sollen. 🙃 Die Halterung wird benötigt um später - je nach Bauteilgröße - automatisch die richtige Spitze auf den Aufnehmer zu stecken. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #picknplace #threadedinsert #mechanics #DIY #3dprinting #soldering #mechanicalengineering #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #pickandplace
🇬🇧 At the weekend I also (as usual) worked o 🇬🇧 At the weekend I also (as usual) worked on a small side project. I don't want to reveal exactly what it is yet, but maybe you can already guess it with the information from the pictures? 🙃 This project will not be 100% useful. But (hopefully) decorative and fun. 😎 For sure it will include some upcycling! 

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Am Wochenende aheb ich (wie eigentlich immer) auch an einem kleinen Seitenprojekt gearbeitet. Ich will noch nicht genau verraten was es ist, aber vllt. Könnt Ihr es mit den Hinweisen aus den Bildern ja schon erahnen. 🙃 Dieses Projekt wird nicht 100% nützlich. Dafür aber (hoffentlich) dekorativ und spaßig. 😎

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #retro #secret #led #DIY #3dprinting #soldering #encoder #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #upcycling #digitalart
🇬🇧 The new controller board is married to th 🇬🇧 The new controller board is married to the #pcknplc machine. 😍 To be able to mount the board, I made a mounting frame again with the 3D printer. Most of the JST connectors could be connected to the new board without modification. Since the TMC2208 stepper motor driver is not yet supported in the firmware, I first installed the good old A4988 stepper motor driver. Finally the firmware can be configured correctly. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Das neue Controller-Board ist mit der #pcknplc Maschine verheiratet. 😍 Um das Board montieren zu können, habe ich wieder einen Montagerahmen mit dem 3D Drucker hergestellt. Die JST Stecker konnten größtenteils ohne Modifikation an das neue Board angeschlossen werden. Da die TMC2208 Schrittmotortreiber noch nicht in der Firmware unterstützt werden habe ich erstmal die guten alten A4988 Schrittmotortreiber verbaut. Endlich lässt sich die Firmware auch korrekt konfigurieren. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #mechanics #smd #mechanicalengineering #DIY #3dprinting #soldering #picknplace #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #pickandplace
🇬🇧 Unfortunately there is some delay in the 🇬🇧 Unfortunately there is some delay in the #pcknplc machine. 😬 But fortunately, I was able to get a taste of something newer hardware. 😍 (There is also a good side in this 😂) It looks like "Smoothieware" (the firmware I plan to use) deprecated the support for boards that use the #LPC1768 MCU. Understandable but in my case this stops me from configure the board properly. So I can configure the initially installed board to suit a 3D printer, but not for operation as a CNC/PNP. In the end I decided to switch to a new board. This comes with the #LPC1769 MCU. Now it's time to adjust the config and keep your fingers crossed that everyhting works as expected. 🙃

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Leider gibt es ein paar Verzögerung bei der #pcknplc Maschine. 😬 Erfreulicherweise konnte ich dazu aber mal wieder in etwas neuere Hardware reinschnuppern. 😍 So wie es aussieht unterstützt "Smoothieware" nur noch eingeschränkt die Boards, welche die #LPC1768 MCU verwenden. Verständlich aber schade, denn so kann ich das inital verbaute Board zwar pasend für einen 3D Drucker konfigurieren, aber nicht für den Betrieb als CNC/PNP. Letztlich habe ich mich dann dazu entschlossen auf ein neues Baord umzusteigen. Auf diesem ist der #LPC1769 verbaut. Nun heißt es die config anpassen und Daumen drücken. 🙃

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #picknplace #openpnp #pickandplace #DIY #3dprinting #soldering #physics #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #smd #motor #electricalengineering #iot #openpnp
🇬🇧 I am currently working on the nozzle hold 🇬🇧 I am currently working on the nozzle holders for the #pcknplc machine. The tips with which the components are later sucked on are available in different sizes. Depending on the component size, these can then be changed automatically. To do this, the nozzle to be changed is inserted horizontally into the corresponding holder and then pulled down from the Z-axis stepper motor. Picking up a new nozzle then works the same way.  Just the other way around. 😌 You can see the first two iterations in the pictures. As soon as I have found the perfect slot width I will print a nozzle holder in which all nozzles can be accommodated at the same time. That makes the assembly a little easier. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Aktuell arbeite ich an den Nozzle-Halterungen für die #pcknplc Maschine. Die Spitzen mit denen die Bauteile später angesaugt werden gibt es in verschiedenen Größen. Je nach Bauteilgröße können diese dann automatisiert gewechselt werden. Dazu wird die zu wechselnde Nozzle in die entsprechende Halterung horizontal eingeführt und dann nach unten vom Schrittmotor der Z-Achse abgezogen. Das Aufnehmen einer neuen Nozzle funktioniert dann genauso. Nur halt andersherum. 😌 Auf den Bildern seht Ihr die ersten beiden Iterationen. Sobald ich die perfekt passende Schlitzbreite gefunden habe werde ich eine Nozzle-Halterung drucken in der alle Nozzles gleichzeitig Platz finden. Das macht die Montage noch etwas einfacher. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #physics #automation #pickandplace #DIY #3dprinting #soldering #longboard #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #mechanicalengineering #picknplace #electricalengineering #iot #espeasy #openpnp
🇬🇧 To connect the vacuum sensors to the main 🇬🇧 To connect the vacuum sensors to the mainboard of the #pcknplc machine, I built a small provisional adapter board on a breadboard. I used a couple of connector strips, which I often received as a supplement to microcontroller boards. Unfortunately, the pins of these connector strips did not accept the solder for soldering at all. Even with additional flux, the pins couldn't be soldered really well (as you can see). Have you already seen something similar and if so, have you been able to fix it somehow? 😐⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Um die Vakuumsensoren mit dem Mainboard der #pcknplc Maschine zu verbinden habe ich eine kleine provisorische Adapterplatine auf einer Lochrasterplatine aufgebaut. Dabei habe ich ein paar Steckerleisten verwendet, welche ich oft als Beilage zu Mikrocontroller Boards geliefert bekommen habe. Leider haben die Pins dieser Steckerleisten das Lötzinn zum verlöten überhaupt nicht angenommen. Selbst mit zusätzlichem Flussmittel konnten die Pins nicht wirklich gut verlötet werden (wie man sieht). Habt Ihr sowas ähnliches auch schon beobachtet und falls ja irgendwie beheben können? 😐⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #flux #prototype #physics #DIY #3dprinting #soldering #pickandplace #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #pickandplace #picknplace #electricalengineering #iot #espeasy #openpnp
🇬🇧 At the moment I'm working on a new NAS. S 🇬🇧 At the moment I'm working on a new NAS. Since the RaspberryPi has existed, I have often thought about using the RaspberryPi to build a NAS out of it. But only the RaspberryPi 4 is really useful for this in my opinion. In order to be able to connect the RaspberryPi and the compact hard drive, I am currently testing different housings in which there is space for both. I want to use OpenMediaVault as a basic administration tool. This makes it very easy to configure SFTP, SMB and other servers. Even an rsync server can also be easily configured. More information will be available soon. 🙃

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Im Moment arbeite ich an einem neuen NAS. Seitdem es den RaspberryPi gibt habe ich schon öfter darüber nachgedacht den RaspberryPi dazu zu nutzen ein NAS daraus zu bauen. Aber erst der RaspberryPi 4 ist meiner Meinung nach wirklich brauchbar dazu. Um den RaspberryPi und die Festplatte Kompakt verbinden zu können teste ich gerade verschiedene Gehäuse in dem beides Platz findet. Als grundlegendes Verwaltungstool will ich OpenMediaVault nutzen. So lassen sich sehr leicht SFTP, SMB und weitere Server konfigurieren. Auch ein rsync-Server kann leicht konfiguriert werden. Bald gibt es mehr Infos dazu. 🙃

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #raspberrypi #threadedinsert #openmediavault #DIY #3dprinting #soldering #nas #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #backup #security #electricalengineering #iot #espeasy #omv
🇬🇧 A BME280 is installed on the circuit boar 🇬🇧 A BME280 is installed on the circuit board of the other project I'm currently working on. This sensor is connected to the microcontroller via the I2C bus. So you can measure the temperature, humidity and air pressure in the room without much effort. On the software side, the sensor can easily be read out using ESPEasy and the appropriate plug-in. A HowTo for the configuration of this plugin via the web menu of ESPEasy can be found on Nerdiy.de. It also describes how you can send the data to your SmartHome to process it there. In the picture shown, the sensor is mounted directly on the PCB, which was manufactured by @pcbway. Of course, you can also connect this sensor to your microcontroller as a breakout board. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Auf der Platine des anderen Projekts an dem ich gerade arbeite ist ein BME280 verbaut. Dieser Sensor wird über den I2C Bus mit dem Mikrocontroller verbunden. So kann man ohne viel Aufwand die Temperatur, die Luftfeuchtigkeit und den Luftdruck im Raum messen. Softwareseitig lässt sich der Sensor  leicht mithilfe von ESPEasy und dem passenden Plugin auslesen. Ein HowTo zur konfiguratuon dieses Plugins über das Webmenü findet Ihr seit kurzem auf Nerdiy.de. So könnt Ihr die Daten auch an Euer SmartHome senden und dort weiter verarbeiten. In dem gezeigten Bild ist der Sensor direkt auf das PCB montiert, welches von @pcbway gefertigt wurde. Ihr könnt diesen Sensor aber natürlich auch als Breakout-Board mit Eurem Mikrocontroller verbinden. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #physics #science #smd #DIY #3dprinting #soldering #climate #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #sensor #smarthome
🇬🇧 One of my long-term projects that I keep 🇬🇧 One of my long-term projects that I keep working on is a new hub for #WinDIY. For this purpose, I planned to relocate the entire electronics for controlling the wing angle of attack in the hub. To do this, the I2C motor driver boards can be connected to the microcontroller board in the middle of the hub via a JST connector / cable. The controlled gear motors should have enough power to be able to adjust the blades even under load. The main board in the middle of the hub contains the sensors required to independently detect excessive speed. Normally, however, it communicates with the central control board via the CAN bus. Let's see if it works the way I imagine. 😬 I think there is still a lot of work to be done here and testing is necessary. 🙃 Thanks to @pcbway for supporting me with such projects with your great board service. 😍⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #smd #mechanicalengineering #physics #DIY #3dprinting #soldering #renewableenergy #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #motor #electricalengineering #iot #espeasy #mechanics #wind
🇬🇧 In the last few days I fixed a few bugs i 🇬🇧 In the last few days I fixed a few bugs in the #pxlBlck plugin. Now the TV simulator dial is working properly. This simulates the typical flickering of a television and can be activated, for example, when nobody is at home. With a little distance, the resulting flickering looks from the outside, viewed through a window, as if someone inside is watching TV. I implemented a code from @adafruit in such a way that it also runs in a "non blocking way" on the ESP. The color information comes from the "Color lines" of Disney films. 🙃⁣
In addition to this change, the RGBW handling has also been improved. Now RGBW Leds aka SK6812 are supported properly. Therefore the color menu has also been revised a bit. In addition, you can now switch between a twelve- and 24-hour mode for some dials. I hope you like the new features. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #rgb #simulator #sk6812 #DIY #3dprinting #soldering #rgbw #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #digitalart #makerlife #tv #retro #electricalengineering #iot #espeasy #led #smarthome
🇬🇧 Do you remember the servo butterfly valve 🇬🇧 Do you remember the servo butterfly valve? I use it to control the branches of my soldering and 3D printer chamber extraction system. The instructions including materiallist and NodeRed Flow for control are now online at Nerdiy.de. 🙂

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Erinnert Ihr Euch noch an das Servo-Schmetrerlingsventil? Ich nutze es zur Steuerung der Abzweigungen meiner Löt- und 3D-Drucker-Kammer Absauganlage. Die Nachbauanleitung inkl. Materialliste und NodeRed Flow zur Ansteuerung ist jetzt auf Nerdiy.de online. 🙂

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #mechanics #threadedinsert #mechanicalengineering #DIY #3dprinting #soldering #defume #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #brushless #servo #electricalengineering #iot #espeasy #valve
🇬🇧 The top of the board for the #servoDigit 🇬🇧 The top of the board for the #servoDigit controller only got a few small changes. In addition to a few minor component changes, a WS2812 2020 LED has also been added. This can be used as a status LED for example. Additionaly a BME280, an RTC and the two ADS1115 I2C ADCs for monitoring the battery voltage can be found on the board. Everything is soldered on the PCB manufactured by @pcbway.🙂⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Die Vorderseite der Platine für den #servoDigit Controller hat nur ein paar kleine Änderungen bekommen. Neben ein paar kleineren Bauteiländerungen ist auch eine WS2812 2020 LED eingezogen, welche als Status-LED genutzt werden kann. Ansonsten finden auf der Platine wuch ein BME280, eine RTC und die zwei ADS1115 I2C ADCs zur Überwachung der Akkuspannung platz. Verlötet ist alles auf dem von @pcbway gefertigtem PCB.🙂⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #physics #threadedinsert #mechanicalengineering #DIY #3dprinting #soldering #smd #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #digitalart #life #electricalengineering #iot #espeasy #servo
🇬🇧 In the last few days I have stripped, sho 🇬🇧 In the last few days I have stripped, shortened and crimped a lot of cables. That means slowly the first real test of the #pcknplc machine is getting closer and closer. The lines are all laid and connected. For the (negative) pressure sensor I built a small provisional board on a breadboard. So two of the sensors (one for each receptacle) can be connected to the mainboard. I replaced the old valves with relatively cheap but sufficient 12V valves. Both the adapter for the pressure sensors and the valves are installed on the base plate via a 3D printed adapter. The MDF board on which the circuit boards are to lie later is already cut to size and is just waiting to be installed. So the picking and placing will start soon. 😍⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Die letzten Tage habe ich eine Menge Leitungen absioliert, gekürzt und gecrimpt. Das heißt so langsam rückt der erste richtige Test der #pcknplc Maschine immer näher. Die Leitungen sind alle verlegt und verbunden. Für den (Unter-)Drucksensor habe ich eine kleine provisorische Platine auf Lochrasterplatine aufgebaut. So können zwei der Sensoren (pro Aufnahme einer) mit dem Mainboard verbunden werden. Die alten Ventile habe ich durch relativ günstige aber  ausreichende 12V Ventile ersetzt. Sowohl der Adapter für die Drucksensoren als auch die Ventile werden über einen 3D gedruckten Adapter auf der Basisplatte verbaut. Die MDF Platte auf der später die Platinen liegen sollen ist auch schon fertig zugeschnitten und wartet nur noch auf ihren Einbau. Es kann also bald losgehen mit dem picken und placen. 😍⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #automation #lifehacks #mechanicalengineering #DIY #3dprinting #soldering #smd #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #lifehacks #motor #electricalengineering #iot #espeasy #pnp
#pickandplace #openpnp
🇬🇧 One of the PCBs I recently received from 🇬🇧 One of the PCBs I recently received from @PCBWay might look familiar to you. It is the second version of the controller for the #servoDigit clock that I am working on. In addition to a few small "clean-ups", this version has a slightly smaller button cell holder. I also use 4xSMD resistors for the first time. That makes soldering even easier. 🙃 Also important: The pin headers for connecting the servos are now arranged in "eight pin packs". It's actually quite difficult to get 14 servo plugs right next to each other when there is no space inbetween. 😬🙃 In the photos you can see the bottom side with the PC9685 PWM port already soldered to it.

You can find more information and detailed instructions for my projects on NerDIY.de 🤓
If you like what I'm doing follow me on @Nerdiy.de

🇩🇪 Eins der PCBs die ich vor kurzem von @PCBWay zugesendet bekommen habe könnte Euch bekannt vorkommen. Es ist die zweite Version des Controllers für die #servoDigit Uhr an der ich arbeite. Neben ein paar kleineren "Aufräumarbeiten" ist auf dieser Version eine etwas kleinere Knopfzellenhalterung verbaut. Außerdem nutze ich das erste Mal  4xSMD Widerstände. Das macht das löten noch einfacher. 🙃 Zusätzlich wichtig: Die Pin-Header zum Anschluss der Servos sind nun in "Achter-Päckchen" angeordnet. Ist nämlivh ganz schon schwer 14 Servo-Stecker direkt nebeneinander zu bekommen. 😬🙃 Auf den Fotos seht Ihr die Unterseite mit sen bereits verlöteten PC9685 PWM Port expandern. 

Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓
Aktuelle infos gibt es auf @Nerdiy.de 

#Nerdiy.de #Nerdiy #Nerdy #i2c #physics #pcbway #DIY #3dprinting #soldering #servo #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #digitalart #clock #electricalengineering #iot #espeasy #smd
🇬🇧 Short preview of the assembly of the #pxl 🇬🇧 Short preview of the assembly of the #pxlBlck_10x10mini. I changed the design of the case so that it is easy to assemble and is held together with just one M2 screw (and an @official_ruthex threaded insert). Due to the higher resolution, even more clock faces can be shown on this display than on the pxlBlck_8x8. Scrolling texts, icons and the familiar animations also work on the display, of course. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Kurze Vorschau zum Zusammenbau des #pxlBlck_10x10mini. Das Design des Gehäuses habe ich so verändert, dass es sich leicht zusammenbauen lässt und mithilfe von nur einer M2 Schraube (und einem @official_ruthex Gewindeinsatz) zusammen gehalten wird. Durch die höhere Auflösung lassen sich auf diesem Display noch mehr Ziffernblätter darstellen als auf dem pxlBlck_8x8 . Lauftexte, Icons und die bekannten Animationen funktionieren auf dem Display natürlich auch. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #mechanicalengineering #threadedinsert #mechanics #DIY #3dprinting #soldering #led #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #project #solderingiron #makerlife #smd #physics #electricalengineering #iot #espeasy #pxlblck #retro #digitalart
🇬🇧 It's been a while since I built this boar 🇬🇧 It's been a while since I built this board. It is the basis for the pxlBlck_10x10mini whose case I am currently working on. The name reveals it: A 10x10 LED matrix of WS2812 3.5x3.5mm LEDs is built into it. Due to the smaller LEDs, the case is even a bit smaller than the case of the 8x8 version. 🙃 There will be more information soon. 😏⁣
Meanwhile also the pxlBlck plugin got some updates and bugfixes in the last few days. Among other things, RGBW LEDs are now also supported.I am currently working on installing the fake TV clock face. With this you can simulate a presence through the typical flickering of the TV. The PCB is of course from @pcbway. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Es ist schon eine Weile her, dass ich diese Platine aufgebaut habe. Sie ist die Basis für den pxlBlck_10x10mini an dessen Gehäuse ich gerade arbeite. Der Name lässt es erahnen: Darauf ist eine 10x10 LED-Matrix aus WS2812 3.5x3.5mm LEDs verbaut. Durch die kleineren LEDs fällt das Gehäuse so sogar etwas kleiner als das Gehäuse der 8x8 Version aus. 🙃 Bald gibt es noch mehr Infos dazu. 😏 ⁣
Das pxlBlck plugin hat in den letzten Tagen auch einige updates und bugfixes bekommen. Unter anderem werden nun auch RGBW LEDs unterstützt. Gerade arbeite ich daran das Fake TV Ziffernblatt einzubauen. So kann man durch das TV typische flackern eine Anwesenheit simulieren.  Das PCB ist natürlich von @pcbway. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #smd #ws2812 #neopixel #DIY #3dprinting #soldering #mechanicalengineering #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #retro #digitalart #electricalengineering #iot #espeasy #pxlblck
🇬🇧 Today I learned a lot about how pneumatic 🇬🇧 Today I learned a lot about how pneumatic valves work - or don't work. Originally I had planned to use a 3/2 way valve for the #pcknplc machine. This has the advantage that in one switching state I can switch the vacuum through to the pick head and in the other switching state the pressure line to the pick head is vented. This is important because otherwise it can happen that the sucked component "sticks" due to the unbalanced negative pressure in the hose line to the pick head. At least that’s the plan. But a (dry) test of the valve did not even deliver the satisfactory "click" that is known from relays. After I was pretty frustrated I took the complete valve apart and found the fault. (He sat in front of the valve): These valves work with the help of a pilot valve. This means that the 12V coil or its magnetic field do not move the main valve piston directly but a smaller/lighter piston that uses the air pressure at the pressure connection to control the main valve piston. ⁣
⁣
This results in two problems for my application: ⁣
1. I want to switch a negative pressure and not a positive one. As a result, there is no air pressure with which the pilot valve can control the main valve.⁣
2. A certain minimum pressure is required to move the main valve. Otherwise it can happen that the main valve piston is not pushed into the end position and gets stuck in an intermediate position.⁣
⁣
In complete: Epic fail, but learned a lot. 🙃😂⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #fail #pressure #physics #DIY #3dprinting #soldering #picknplace #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #openpnp #motor #electricalengineering #iot #pickandplace
🇬🇧 In addition to all the work on the #pcknp 🇬🇧 In addition to all the work on the #pcknplc machine, I've also prepared a new project in the meantime. The people at @pcbway made and delivered the circuit board to me within a few days. 😍 I've wanted to switch my projects to USB-C for a long time. This PCB is now the first attempt in this direction. If everything works out as I imagine, this PCB may already be the first candidate for my pick and place machine. For this purpose I have already placed a few fiducials (the exposed point in the corner) on the PCB. These serve as an orientation aid for the optical position detection of the machine. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Neben den ganzen Arbeiten an der #pcknplc Maschine habe ich in der Zwischenzeit auch ein neues Projekt vorbereitet. Die Platine dazu haben mir die Leute von @pcbway dann innerhalb von ein paar Tagen gefertigt und geliefert. 😍 Ich wollte meine Projekte schon lange auf USB-C umstellen. Dieses PCB ist nun der erste Versuch in dieser Richtung. Wenn alles so klappt wie ich mir das Vorstelle ist dieses PCB vieleicht auch schon der erste Kandidat für meine Pick and Place Maschine. Dazu habe ich auf dem PCB auch schon ein paar Passermarken (der freigestellte Punkt in der Ecke) untergebracht. Dieses dienen als Orientierungshilfe für die optische Positionserkennung der Maschine. 🙃⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #usb  #usbc #mechanics #DIY #3dprinting #soldering #mechanicalengineering #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #retro #motor #electricalengineering #iot #espeasy #led
🇬🇧 Often the (supposedly) little things hold 🇬🇧 Often the (supposedly) little things hold back the most. When I had all the cables in their place yesterday, I noticed that my first plan to simply solder the cables to thr cables of the steppers and co probably isn't the best. A terminal point on which all cables can be connected cleanly would have been cool. Long story short: I have now attached a terminal point to the free space above the drag chain of the pick and place head. So the hardware on the pick and place head can be neatly connected to the supply lines via terminals. It would surely have been enoigh to just solder them together, but that way everything is tidy and wiring is a little easier. 🙃⁣
⁣
You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣
If you like what I'm doing follow me on @Nerdiy.de⁣
⁣
🇩🇪 Oft halten die (vermeintlich) kleinen Dinge ja am meisten auf. Als ich gestern alle Leitungen an Ihrem Platz hatte, fiel mir auf, dass mein erster Plan die Leitungen einfach an Stepper und Co anzulöten möglicherweise nicht so praktisch ist. Eine Klemmstelle auf der man alle Leitungen sauber auflegen kann wäre cool gewesen. Lange Rede kurzer Sinn: Auf dem freien Platz oberhalb der Schleppkette habe ich nun noch eine Klemmstelle angebracht. So können die Schrittmotoren, Endschalter und Co sauber über Klemmen mit den Zuleitungen verbunden werden. Zusammenlöten hätte es sicher auch getan, aber so hat man alles ordentlich und das Verdrahten geht nochmal etwas leichter von der Hand. 🙃 ⁣
⁣
Mehr Infos und detaillierte Anleitungen zu meinen Projekten findet ihr auf NerDIY.de 🤓⁣
Aktuelle infos gibt es auf @Nerdiy.de ⁣
⁣
#Nerdiy.de #Nerdiy #Nerdy #design #mechanics #pickandplace #DIY #3dprinting #soldering #terminal #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #mechanicalengineering #motor #electricalengineering #iot #espeasy #openpnp
Folge Nerdiy.de auf Instagram
This error message is only visible to WordPress admins
HTTP Error. Unable to connect to the Instagram API. Feed will not update.

Latest articles

  • News: PCB-Entwicklung – I2C_mtrDrvr V1.0, servoDigitCtrlr, pxlBlck_multiPCB, XGZP6847_adapter and nanoPxl V1.4
  • HowTo: ESPEasy – Set up password protection, save and restore configurations
  • HowTo: NodeRed – Switch the RaspberryPi screen on and off
  • HowTo: 3D printing – Build a solder fume extraction hose incl. funnel
  • HowTo: NodeRed – Trigger actions via Windows shortcut / mouse click

Categories

  • 3D-Printing
  • Evening project(<2h)
  • General
  • Apple
  • Arduino
  • Codesnippets
  • Electrical
  • Electronics
  • ESPEasy Sensors & Actors
  • ESPEasy
  • Skills
  • FritzBox
  • On one's own account
  • Spoon
  • MagicMirror
  • News
  • NodeRed
  • PCB Design
  • pxlBlck
  • RaspberryPi
  • SmartHome
  • Day project (<5h)
  • Tasmota
  • About
  • Weekend project (<12h)
  • Basics
  • FHEM
  • pxlBlckDev
  • Review

Tags

3D-Printing (8) 433Mhz (8) Actuators (15) Arduino (19) Arduino Nano (6) Automation (45) Basics (4) Clock (5) DIY-Lamp (6) Elektronik (4) ESP32 (19) ESP8266 (23) ESPEasy (20) ESPEasy-Plugin (20) FHEM (5) FibonacciClock (4) FritzBox (6) Internet (7) IoT (5) Lamp (3) LDR (3) LED (4) Linux (5) MagicMirror (6) MQTT (8) Network (6) NodeRed (38) On one's own account (3) Pushbullet (3) PuTTy (6) pxlBlck (11) pxlBlckPlattform (4) RaspberryPi (60) RasPi (57) Raspian (35) Sensors (10) Smart (12) SmartHome (4) SmartHome (77) Sonoff (4) Spoon (3) SSH (10) Tasmota (13) WinDIY (11) WS2812B (3)

Licenses

All works presented on Nerdiy.de are protected. Unless otherwise stated, they are subject to CC BY-NC-SA 4.0 or GNU AGPL v3.0. You can find more information at:

https://nerdiy.de/en/lizenz/

Creative Commons Lizenzvertrag

Trademarks

All third-party trademarks are the property of their respective owners.

Ideas & Suggestions

Do you have ideas, suggestions or other suggestions for projects that you would like to see on Nerdiy.de? Then inform us at www.nerdiy.de/kontakt/

Last comments

  • Fab on WinDIY – The wind turbine from the 3D printer
  • Fab on HowTo: WinDIY – Assemble the Wind Turbine’s Wings
  • Fab on WinDIY – The wind turbine from the 3D printer
  • Michael Buchholz on WinDIY – The wind turbine from the 3D printer
  • Daniel on WinDIY – The wind turbine from the 3D printer
  • Safety instructions
  • Contact
  • About
  • Imprint
  • License
  • Data protection
  • Sitemap