{"id":1098,"date":"2020-09-09T18:44:54","date_gmt":"2020-09-09T16:44:54","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=1098"},"modified":"2022-01-12T08:00:27","modified_gmt":"2022-01-12T07:00:27","slug":"howto-rotate-raspberrypi-screen-output-2","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/howto-rotate-raspberrypi-screen-output-2\/","title":{"rendered":"HowTo: Raspberry Pi \u2013 rotate screen output"},"content":{"rendered":"
\n

Especially if you have connected an external screen, you may be faced with the problem of wanting to rotate the screen output.<\/p>\n\n\n\n

A typical use case, for example, is if you use your RaspberryPi to build a MagicMirror. To do this, the screen is often hung rotated by 90\u00b0. Now of course you also have to rotate the screen output by 90\u00b0. <\/p>\n\n\n\n

How this works and what you need to know is described in the following article.<\/p>\n\n\n\n

\n\n\n\n

Requirements<\/h2>\n\n\n\n

Helpful articles:
<\/strong>Before you start with this article you should have prepared the RaspberryPi so that it is accessible via the network and controllable via SSH.<\/p>\n\n\n\n

The following three articles describe what needs to be done to prepare the RaspberryPi:
RaspberryPi \u2013 setup for nerdiys!<\/a><\/strong><\/em>
RaspberryPi \u2013 The first configuration!
<\/a>RaspberryPi \u2013 Control the RaspberryPi via SSH<\/a><\/strong><\/em><\/p>\n\n\n\n

Required tool:
<\/strong>-no-<\/p>\n\n\n\n

Required material:<\/strong><\/p>\n\n\n\n

In the following list you will find all the parts you need to implement this article.<\/strong>

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n<\/p>\n\n\n\n
\n\n\n

Log in to the RaspberryPi via SSH<\/h2>\r\n

To start, you must first log in to the Rasp Pi with Putty via SSH. How to do this is in the article RaspberryPi - Control the RaspberryPi via SSH<\/strong><\/em><\/a> described.<\/p>\r\n

\"\"<\/a>
After entering your username and password you can enter the first commands.<\/figcaption><\/figure>\n\n\n\n
\n\n\n\n

Adjust the screen orientation using config.txt<\/strong><\/h2>\n\n\n\n

There are basically different ways to rotate the screen output. One possibility is to set the screen orientation in the configuration of your Raspberry Pi.<\/p>\n\n\n\n

\"\"<\/a><\/figure>
\n

To do this, connect to your RaspberryPi and open the configuration file with the following command.<\/p>\n<\/div><\/div>\n\n\n\n

<\/p>\n\n\n\n

sudo nano \/boot\/config.txt<\/pre>\n\n\n\n
<\/p>\n\n\n\n
\"\"<\/a><\/figure>
\n
In the open configuration file you now have to navigate to the bottom of the file using the arrow keys. <\/p>\n<\/div><\/div>\n\n\n\n
<\/p>\n\n\n\n
\"\"<\/a><\/figure>
\n
Once there, insert the following line.<\/p>\n<\/div><\/div>\n\n\n\n
<\/p>\n\n\n\n
display_rotate=2<\/pre>\n\n\n\n
<\/p>\n\n\n\n
But beware: The value you set here determines the rotation of the display. The setting \"display_rotate=2\" therefore causes the screen content to be rotated by 180\u00b0. For other angles, you must set this parameter according to the table below. <\/p>\n\n\n\n

Value<\/th>rotation<\/th><\/tr><\/thead>
0<\/td>normal<\/td><\/tr>
1<\/td>90\u00b0<\/td><\/tr>
2<\/td>180\u00b0<\/td><\/tr>
3<\/td>270\u00b0<\/td><\/tr>
0x10000<\/td>flip horizontally<\/td><\/tr>
0x20000<\/td>flip vertically<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"\"<\/a><\/figure>
\n

As soon as you have chosen the setting correctly, you can save the configuration file with the key combination CTRL-X, then Y and Enter.<\/p>\n<\/div><\/div>\n\n\n\n

Now all you have to do is restart your RaspberryPi and your screen content should be rotated accordingly. \ud83d\ude42<\/p>\n\n\n\n

\n\n\n

Have fun with the project<\/h2>\r\n

I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n

PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n

\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0 \"\"<\/p>\n\n\n\n

<\/p>\n<\/div><\/div>","protected":false},"excerpt":{"rendered":"

Especially if you have connected an external monitor, it can happen that you are faced with the problem of wanting to rotate the screen output. A typical use case is, for example, when you want to [...].<\/p>","protected":false},"author":1,"featured_media":10105,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[149,24,61],"tags":[],"class_list":["post-1098","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abendprojekt2h","category-raspberry-pi","category-smarthome"],"yoast_head":"\nHowTo: Raspberry Pi - Bildschirmausgabe drehen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Raspberry Pi - Bildschirmausgabe drehen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2020-09-09T16:44:54+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-01-12T07:00:27+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"661\" \/>\n\t<meta property=\"og:image:height\" content=\"418\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Raspberry Pi – Bildschirmausgabe drehen\",\"datePublished\":\"2020-09-09T16:44:54+00:00\",\"dateModified\":\"2022-01-12T07:00:27+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/\"},\"wordCount\":329,\"commentCount\":8,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1\",\"articleSection\":[\"Abendprojekt(<2h)\",\"Raspberry Pi\",\"SmartHome\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/\",\"name\":\"HowTo: Raspberry Pi - Bildschirmausgabe drehen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1\",\"datePublished\":\"2020-09-09T16:44:54+00:00\",\"dateModified\":\"2022-01-12T07:00:27+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1\",\"width\":661,\"height\":418},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/fr\\\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Raspberry Pi – Bildschirmausgabe drehen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Raspberry Pi - Rotate screen output - nerdiy.de - DIY, electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: Raspberry Pi - Bildschirmausgabe drehen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2020-09-09T16:44:54+00:00","article_modified_time":"2022-01-12T07:00:27+00:00","og_image":[{"width":661,"height":418,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","type":"image\/png"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Raspberry Pi – Bildschirmausgabe drehen","datePublished":"2020-09-09T16:44:54+00:00","dateModified":"2022-01-12T07:00:27+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/"},"wordCount":329,"commentCount":8,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","articleSection":["Abendprojekt(<2h)","Raspberry Pi","SmartHome"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/","url":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/","name":"HowTo: Raspberry Pi - Rotate screen output - nerdiy.de - DIY, electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","datePublished":"2020-09-09T16:44:54+00:00","dateModified":"2022-01-12T07:00:27+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","width":661,"height":418},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/fr\/comment-faire-pivoter-la-sortie-decran-de-raspberrypi\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Raspberry Pi – Bildschirmausgabe drehen"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/09\/www.nerdiy.de-howto-raspberrypi-bildschirmausgabe-drehen-putty-afxoqq67m3.png?fit=661%2C418&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-hI","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":81,"url":"https:\/\/nerdiy.de\/en\/raspberrypi-setup-for-nerdiys\/","url_meta":{"origin":1098,"position":0},"title":"HowTo: RaspberryPi \u2013 Setup for nerdys!","author":"Fab","date":"10. February 2018","format":false,"excerpt":"So, auf gehts zu dem ersten technischen Artikel: Wie nehme ich einen RaspberryPi in Betrieb?! Jetzt werden sich ein paar Leute denken, dass es dazu schon ca. eine Millionen Tutorials auf diesem Planeten gibt. Ja, das stimmt und vermutlich ist die Anzahl nicht Mal \u00fcbertrieben. Was ich aber bei vielen\u2026","rel":"","context":"In "Raspberry Pi"","block_context":{"text":"Raspberry Pi","link":"https:\/\/nerdiy.de\/en\/category\/raspberry-pi\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171010_191749-scaled.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171010_191749-scaled.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171010_191749-scaled.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171010_191749-scaled.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171010_191749-scaled.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":14852,"url":"https:\/\/nerdiy.de\/en\/howto-nodered-switch-the-raspberrypi-screen-on-and-off\/","url_meta":{"origin":1098,"position":1},"title":"HowTo: Node Red - Turn Raspberry Pi screen on and off","author":"Fab","date":"18. February 2021","format":false,"excerpt":"Damit mein MagicMirror nur dann eingeschaltet ist, wenn ich ihn auch wirklich nutze, habe ich eine kleine Automatisierung mithilfe von NodeRed konfiguriert. So wird der Bildschirm nur dann eingeschaltet wenn auch eine Bewegung erkannt wird. Der Bildschirm selber wird dabei \u00fcber den Befehl \"vcgencmd\" ein- und ausgeschaltet. (Mehr infos hier:\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/02\/www.nerdiy.de-howto-nodered-raspberrypi-bildschirm-ein-und-ausschalten-chrome-rpwvjefddc.jpg?fit=1200%2C619&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/02\/www.nerdiy.de-howto-nodered-raspberrypi-bildschirm-ein-und-ausschalten-chrome-rpwvjefddc.jpg?fit=1200%2C619&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/02\/www.nerdiy.de-howto-nodered-raspberrypi-bildschirm-ein-und-ausschalten-chrome-rpwvjefddc.jpg?fit=1200%2C619&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/02\/www.nerdiy.de-howto-nodered-raspberrypi-bildschirm-ein-und-ausschalten-chrome-rpwvjefddc.jpg?fit=1200%2C619&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/02\/www.nerdiy.de-howto-nodered-raspberrypi-bildschirm-ein-und-ausschalten-chrome-rpwvjefddc.jpg?fit=1200%2C619&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":1111,"url":"https:\/\/nerdiy.de\/en\/magicmirror-installation-of-the-required-software\/","url_meta":{"origin":1098,"position":2},"title":"HowTo: Magic Mirror \u2013 Installation of the required software","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ein MagicMirror besteht\u00a0neben dem offensichtlichem Spiegel&Bildschirm aus einem wichtigen Teil Software. Daf\u00fcr gibt es mittlerweile einige gute Softwarepakete. Die meiner Meinung nach beste ist die\u00a0von\u00a0Michael Teeuw. Er hat die f\u00fcr seinen MagicMirror entwickelte Software also OpenSource Software zur Verf\u00fcgung gestellt und mit der Zeit ist daraus ein ziemlich umfangreiches MagicMirror-\u00d6kosystem\u2026","rel":"","context":"In "Raspberry Pi"","block_context":{"text":"Raspberry Pi","link":"https:\/\/nerdiy.de\/en\/category\/raspberry-pi\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":19275,"url":"https:\/\/nerdiy.de\/en\/howto-raspberry-pi-gpio-show-overview-of-the-raspberry-pi-in-the-console\/","url_meta":{"origin":1098,"position":3},"title":"HowTo: Raspberry Pi - Show GPIO overview of the Raspberry Pi in the console","author":"Fab","date":"5. February 2023","format":false,"excerpt":"Der Raspberry Pi ist f\u00fcr viele seiner Eigenschaften ber\u00fchmt. Da ist zum einen die Gr\u00f6\u00dfe, Leistung und (zu Zeiten ohne Bauteilknappheit) auch der Preis der f\u00fcr so ein kleines praktisches Ger\u00e4t wirklich beeindruckend ist. Als \"Bastelcomputer\" ist er vor allem deswegen ber\u00fchmt geworden, weil externe Hardware direkt \u00fcber seine GPIO\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-raspberry-pi-gpio-uebersicht-des-raspberry-pi-anzeigen-windowsterminal-kikfpbyndu.jpg?fit=1200%2C618&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-raspberry-pi-gpio-uebersicht-des-raspberry-pi-anzeigen-windowsterminal-kikfpbyndu.jpg?fit=1200%2C618&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-raspberry-pi-gpio-uebersicht-des-raspberry-pi-anzeigen-windowsterminal-kikfpbyndu.jpg?fit=1200%2C618&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-raspberry-pi-gpio-uebersicht-des-raspberry-pi-anzeigen-windowsterminal-kikfpbyndu.jpg?fit=1200%2C618&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-raspberry-pi-gpio-uebersicht-des-raspberry-pi-anzeigen-windowsterminal-kikfpbyndu.jpg?fit=1200%2C618&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17783,"url":"https:\/\/nerdiy.de\/en\/howto-get-raspberry-pi-linux-system-information-with-neofetch\/","url_meta":{"origin":1098,"position":4},"title":"HowTo: Raspberry Pi - Get Linux system information with Neofetch","author":"Fab","date":"7. January 2022","format":false,"excerpt":"Falls Ihr mal in die Situation kommt schnell die wichtigsten Systeminformationen \u00fcber euren Raspberry Pi oder ein anderes Linux System sammeln zu m\u00fcssen ist Neofetch ein sehr hilfreiches Tool. Mit nur einem Befehl k\u00f6nnt Ihr so die wichtigsten Systemdaten abrufen und ansehnlich darstellen lassen. Wie Ihr Neofetch nutzen k\u00f6nnt ist\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-raspberry-pi-linux-systeminformationen-abrufen-mit-neofetch-debian-sogyp9osr7.jpg?fit=732%2C399&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-raspberry-pi-linux-systeminformationen-abrufen-mit-neofetch-debian-sogyp9osr7.jpg?fit=732%2C399&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-raspberry-pi-linux-systeminformationen-abrufen-mit-neofetch-debian-sogyp9osr7.jpg?fit=732%2C399&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-raspberry-pi-linux-systeminformationen-abrufen-mit-neofetch-debian-sogyp9osr7.jpg?fit=732%2C399&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1235,"url":"https:\/\/nerdiy.de\/en\/set-up-raspberrypi-ssh-and-wifi-before-first-boot\/","url_meta":{"origin":1098,"position":5},"title":"HowTo: Raspberry Pi \u2013 Set SSH and WiFi before the first boot process","author":"Fab","date":"24. February 2019","format":false,"excerpt":"Standardm\u00e4\u00dfig ist der SSH Zugang auf einem RaspberryPi deaktiviert. Solltet Ihr also einen frischen RaspberryPi das erste Mal starten oder Ihr habt das Betriebssystem neu installiert, so ist der Login per SSH ohne weiteres erst mal nicht m\u00f6glich. Um diesen zu aktivieren m\u00fcsstet Ihr Euch erst Mal lokal - also\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/09\/www.nerdiy.de-raspberrypi-ssh-und-wifi-vor-dem-ersten-bootvorgang-einstellen-notepad-2018-09-25-22-39-25.png?fit=719%2C447&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/09\/www.nerdiy.de-raspberrypi-ssh-und-wifi-vor-dem-ersten-bootvorgang-einstellen-notepad-2018-09-25-22-39-25.png?fit=719%2C447&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/09\/www.nerdiy.de-raspberrypi-ssh-und-wifi-vor-dem-ersten-bootvorgang-einstellen-notepad-2018-09-25-22-39-25.png?fit=719%2C447&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/09\/www.nerdiy.de-raspberrypi-ssh-und-wifi-vor-dem-ersten-bootvorgang-einstellen-notepad-2018-09-25-22-39-25.png?fit=719%2C447&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1098","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=1098"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1098\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/10105"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=1098"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=1098"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=1098"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}