{"id":1100,"date":"2019-02-28T18:09:55","date_gmt":"2019-02-28T17:09:55","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=1100"},"modified":"2021-03-04T15:44:44","modified_gmt":"2021-03-04T14:44:44","slug":"setup-magicmirror-autostart-2","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/setup-magicmirror-autostart-2\/","title":{"rendered":"HowTo: Magic Mirror \u2013 set up autostart"},"content":{"rendered":"

\"Out-of-theBox\" the installed MagicMirror software does not start automatically after the RaspberryPi is booted. Therefore it is practical to set up an autostart for the MagicMirror software.<\/p>\n

How to do this is described in the following article.<\/p>\n

\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n

\n
\n

Requirements<\/h2>\n

Helpful articles:
\n<\/strong>Before you start with the article you should have prepared the RaspberryPi so far that it is accessible over the network and controllable via SSH. In addition, the MagicMirror software should already be installed.<\/p>\n

The following articles describe what has to be done to prepare the RaspberryPi so far:
\nRaspberryPi \u2013 setup for nerdiys!<\/a><\/strong><\/em>
\nRaspberryPi \u2013 The first configuration!
\n<\/a>RaspberryPi \u2013 Control the RaspberryPi via SSH<\/a><\/strong><\/em>
\nMagicMirror - Installing the required software<\/strong><\/em><\/a><\/p>\n

Required material:
\n<\/strong>-no-<\/p>\n

Required material:<\/strong><\/p>\n

In the following list you will find all the parts you need to implement this article.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Log in to the RaspberryPi via SSH<\/h2>\r\n

To start, you must first log in to the Rasp Pi with Putty via SSH. How to do this is in the article RaspberryPi - Control the RaspberryPi via SSH<\/strong><\/em><\/a> described.<\/p>\r\n

\"\"<\/a>
After entering your username and password you can enter the first commands.<\/figcaption><\/figure>\n<\/div>\n
\n

Set up autostart with the Node.js Process Manager<\/h2>\n

There are several ways to organize the autostart of MagicMirror. One of these ways is the ProcessManager for Node.js applications. The advantage of this is that it not only handles the autostart of the MagicMirror software. It also monitors after startup if the software is running correctly and restarts it if necessary.<\/p>\n

\n

Installation of the Process Manager<\/h2>\n

The process manager is not pre-installed on most systems. Therefore it must be installed with the following command.<\/p>\n

sudo npm install -g pm2<\/pre>\n
\"\"<\/a><\/p>\n
Installation of the ProcessManager<\/p>\n
\n
Set up autostart of the ProcessManager<\/h2>\n
If the ProcessManager is installed, you must now set up an autostart for the ProcessManager. Because the ProcessManager can only take care of the autostart of the MagicMirror software, if it was started before. You can set up the autostart of the ProcessManager with the following command.<\/p>\n
sudo pm2 startup<\/pre>\n
\"\"<\/a>
To set up the autostart of the ProcessManager you have to enter the command \"sudo pm2 startup\".<\/figcaption><\/figure>\n
\n
Set up MagicMirror Start Script<\/h2>\n
For the autostart of the MagicMirror to work you must first set up a start script. To do this, change to your home directory with the following command:<\/p>\n
CD ~<\/pre>\n
\"\"<\/a><\/p>\n
There you create a new (still empty) file:<\/p>\n
nano mm.sh<\/pre>\n
\"\"<\/a><\/p>\n
And inserts the following text in it.<\/p>\n
cd ~\/MagicMirror DISPLAY=:0 npm start<\/pre>\n
\"\"<\/a>
After you have inserted the text, save the file by pressing \"CTRL+X\" and...<\/figcaption><\/figure>\n
\"\"<\/a>
... a press on \"Enter\".<\/figcaption><\/figure>\n
After that you have to make this script executable. The following command is sufficient<\/p>\n
sudo chmod +x mm.sh<\/pre>\n
\"\"<\/a>
This will give the script the necessary permissions to be executed.<\/figcaption><\/figure>\n
Now you can start the script with the ProcessManager.<\/p>\n
pm2 start mm.sh<\/pre>\n
\"\"<\/a><\/p>\n
And now comes the real magic. With the following command the current state (the script\/MagicMirror is running) is saved. This means that the ProcessManager now continuously checks whether the script and thus the MagicMirror is running correctly. If the MagicMirror crashes or is not running yet it will be started automatically by the ProcessManager.<\/p>\n
pm2 save<\/pre>\n
\"\"<\/a><\/p>\n
\n
Controlling the MagicMirror via the Process Manager<\/h2>\n
You can also control the MagicMirror via the ProcessManager. So start and stop. You also have the possibility to display login information.<\/p>\n
Restart<\/h3>\n
pm2 restart mm<\/pre>\n
Stop<\/h3>\n
pm2 stop mm<\/pre>\n
Show log file<\/h3>\n
pm2 logs mm<\/pre>\n
Show process information<\/h3>\n
pm2 show mm<\/pre>\n
\n
More information<\/h2>\n
https:\/\/github.com\/MichMich\/MagicMirror\/wiki\/Auto-Starting-MagicMirror<\/strong><\/em><\/a><\/p>\n
\n
Have fun with the project<\/h2>\r\n
I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n
PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
\"Out-of-theBox\" the installed MagicMirror software does not start automatically after the RaspberryPi is booted. Therefore it is practical to set up an autostart for the MagicMirror software. How to do this is described in the following article. [...]<\/p>","protected":false},"author":1,"featured_media":1676,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[149,1,122,24,61],"tags":[112,47],"class_list":["post-1100","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abendprojekt2h","category-allgemein","category-magic-mirror","category-raspberry-pi","category-smarthome","tag-magicmirror","tag-raspi"],"yoast_head":"\nHowTo: Magic Mirror - Autostart einrichten - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/setup-magicmirror-autostart-2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Magic Mirror - Autostart einrichten - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/setup-magicmirror-autostart-2\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-02-28T17:09:55+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-03-04T14:44:44+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"661\" \/>\n\t<meta property=\"og:image:height\" content=\"418\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Magic Mirror – Autostart einrichten\",\"datePublished\":\"2019-02-28T17:09:55+00:00\",\"dateModified\":\"2021-03-04T14:44:44+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/\"},\"wordCount\":524,\"commentCount\":4,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1\",\"keywords\":[\"Magic Mirror\",\"RasPi\"],\"articleSection\":[\"Abendprojekt(<2h)\",\"Allgemein\",\"Magic Mirror\",\"Raspberry Pi\",\"SmartHome\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/\",\"name\":\"HowTo: Magic Mirror - Autostart einrichten - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1\",\"datePublished\":\"2019-02-28T17:09:55+00:00\",\"dateModified\":\"2021-03-04T14:44:44+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1\",\"width\":661,\"height\":418},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/magicmirror-autostart-einrichten\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Magic Mirror – Autostart einrichten\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Magic Mirror - Set up autostart - nerdiy.de - DIY, electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/setup-magicmirror-autostart-2\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: Magic Mirror - Autostart einrichten - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/setup-magicmirror-autostart-2\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2019-02-28T17:09:55+00:00","article_modified_time":"2021-03-04T14:44:44+00:00","og_image":[{"width":661,"height":418,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","type":"image\/png"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Magic Mirror – Autostart einrichten","datePublished":"2019-02-28T17:09:55+00:00","dateModified":"2021-03-04T14:44:44+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/"},"wordCount":524,"commentCount":4,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","keywords":["Magic Mirror","RasPi"],"articleSection":["Abendprojekt(<2h)","Allgemein","Magic Mirror","Raspberry Pi","SmartHome"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/","url":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/","name":"HowTo: Magic Mirror - Set up autostart - nerdiy.de - DIY, electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","datePublished":"2019-02-28T17:09:55+00:00","dateModified":"2021-03-04T14:44:44+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","width":661,"height":418},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/de_de\/magicmirror-autostart-einrichten\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Magic Mirror – Autostart einrichten"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-autostart-einrichten-putty-2018-10-01-18-58-45.png?fit=661%2C418&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-hK","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":1111,"url":"https:\/\/nerdiy.de\/en\/magicmirror-installation-of-the-required-software\/","url_meta":{"origin":1100,"position":0},"title":"HowTo: Magic Mirror \u2013 Installation of the required software","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ein MagicMirror besteht\u00a0neben dem offensichtlichem Spiegel&Bildschirm aus einem wichtigen Teil Software. Daf\u00fcr gibt es mittlerweile einige gute Softwarepakete. Die meiner Meinung nach beste ist die\u00a0von\u00a0Michael Teeuw. Er hat die f\u00fcr seinen MagicMirror entwickelte Software also OpenSource Software zur Verf\u00fcgung gestellt und mit der Zeit ist daraus ein ziemlich umfangreiches MagicMirror-\u00d6kosystem\u2026","rel":"","context":"In "Raspberry Pi"","block_context":{"text":"Raspberry Pi","link":"https:\/\/nerdiy.de\/en\/category\/raspberry-pi\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-installation-der-benoetigten-software-chrome-2018-10-16-20-02-34.png?fit=812%2C766&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":1612,"url":"https:\/\/nerdiy.de\/en\/install-magicmirror-3rd-party-module\/","url_meta":{"origin":1100,"position":1},"title":"HowTo: Magic Mirror \u2013 Install 3rd party modules","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Wie im Artikel\u00a0MagicMirror - Installation der ben\u00f6tigten Software bereits angedeutet l\u00e4sst sich die Grundfunktionalit\u00e4t der MagicMirror-Software durch diverse Plugins erweitern. Wo Ihr diese Plugins findet und wie Ihr sie dann installiert ist im folgenden Artikel beschrieben. Voraussetzungen Hilfreiche Artikel: Bevor ihr mit der Installation startet solltet ihr den RaspberryPi soweit\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-3rd-party-module-installieren-chrome-2018-10-01-12-04-30.png?fit=1200%2C573&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-3rd-party-module-installieren-chrome-2018-10-01-12-04-30.png?fit=1200%2C573&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-3rd-party-module-installieren-chrome-2018-10-01-12-04-30.png?fit=1200%2C573&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-3rd-party-module-installieren-chrome-2018-10-01-12-04-30.png?fit=1200%2C573&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-3rd-party-module-installieren-chrome-2018-10-01-12-04-30.png?fit=1200%2C573&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2447,"url":"https:\/\/nerdiy.de\/en\/build-your-own-opensource-smarthome-2\/","url_meta":{"origin":1100,"position":2},"title":"Build your own OpenSource SmartHome","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ich muss zugeben ich habe noch nicht die perfekte L\u00f6sung gefunden um alle SmartHome-relevanten Artikel \u00fcbersichtlich aufzulisten. Um bis dahin zumindest etwas \u00dcbersicht in die verf\u00fcgbaren SmartHome-Artikel zu bringen kommt hier die folgende Liste mit allen aktuell verf\u00fcgbaren und teilweise geplanten Artikeln. :) Allgemein\/Diverses NodeRed \u2013 Installation von NodeRed auf\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":12198,"url":"https:\/\/nerdiy.de\/en\/howto-install-raspberrypi-shairport-airplay-on-raspberrypi-2\/","url_meta":{"origin":1100,"position":3},"title":"HowTo: Raspberry Pi \u2013 Install "Shairport" Airplay on the Raspberry Pi","author":"Fab","date":"12. November 2020","format":false,"excerpt":"Jeder der ein (oder mehrere) Apple-Ger\u00e4te verwendet kennt sicherlich die AirPlay-Funktion. Dank dieser lassen sich Medien aller Art an andere Ger\u00e4te im Netzwerk streamen. So kann man Fotos auf einem AirPlay f\u00e4higen Fernseher anzeigen, Videos abspielen oder auch Musik auf AirPlay f\u00e4higen Lautsprechern wiedergeben. Zumindest letzteres k\u00f6nnt Ihr auch ganz\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-shairport-airplay-empfaenger-auf-dem-raspberrypi-installieren-img-20201111-wa0001-2.jpg?fit=554%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-shairport-airplay-empfaenger-auf-dem-raspberrypi-installieren-img-20201111-wa0001-2.jpg?fit=554%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-shairport-airplay-empfaenger-auf-dem-raspberrypi-installieren-img-20201111-wa0001-2.jpg?fit=554%2C1200&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":12098,"url":"https:\/\/nerdiy.de\/en\/howto-use-raspberrypi-raspberrypi-with-raspotify-as-a-spotify-speaker-2\/","url_meta":{"origin":1100,"position":4},"title":"HowTo: Raspberry Pi \u2013 Use Raspberry Pi with \u201cRaspotify\u201d as a Spotify speaker","author":"Fab","date":"29. November 2020","format":false,"excerpt":"In dem Artikel RaspberryPi \u2013 \u201eShairport\u201c Airplay auf dem RaspberryPi installieren habe ich beschrieben wie Ihr Euren RaspberryPi relativ leicht um die Funktion eines AirPlay Lautsprechers erweitern k\u00f6nnt. Dank eines weiteren coolen OpenSource-Projektes ist es aber auch m\u00f6glich Euren RaspberryPi als Spotify Lautsprecher nutzen zu k\u00f6nnen. Dazu ben\u00f6tigt Ihr lediglich\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-raspberrypi-mit-raspotify-als-spotify-lautsprecher-nutzen-screenshot-20201113-165926-spotify.jpg?fit=675%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-raspberrypi-mit-raspotify-als-spotify-lautsprecher-nutzen-screenshot-20201113-165926-spotify.jpg?fit=675%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-raspberrypi-raspberrypi-mit-raspotify-als-spotify-lautsprecher-nutzen-screenshot-20201113-165926-spotify.jpg?fit=675%2C1200&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":1116,"url":"https:\/\/nerdiy.de\/en\/show-magicmirror-current-traffic-overview\/","url_meta":{"origin":1100,"position":5},"title":"HowTo: Magic Mirror \u2013 Show current traffic overview","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ein cooles und praktisches Plugin f\u00fcr den MagicMirror ist das Plugin \"MMM-GoogleMapsTraffic\". Dieses zeigt euch den Status des aktuellen Stra\u00dfenverkehrs in Eurer Umgebung an. Wie Ihr dies installiert ist im folgenden Artikel beschrieben Voraussetzungen Hilfreiche Artikel: Bevor ihr mit der Installation startet solltet ihr den RaspberryPi soweit vorbereitet haben, dass\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-aktuelle-verkehrsuebersicht-anzeigen-chrome-2018-10-01-15-27-49-1.png?fit=791%2C589&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-aktuelle-verkehrsuebersicht-anzeigen-chrome-2018-10-01-15-27-49-1.png?fit=791%2C589&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-aktuelle-verkehrsuebersicht-anzeigen-chrome-2018-10-01-15-27-49-1.png?fit=791%2C589&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-magicmirror-aktuelle-verkehrsuebersicht-anzeigen-chrome-2018-10-01-15-27-49-1.png?fit=791%2C589&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1100","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=1100"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1100\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/1676"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=1100"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=1100"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=1100"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}