{"id":1260,"date":"2019-02-23T23:51:53","date_gmt":"2019-02-23T22:51:53","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=1260"},"modified":"2021-12-18T18:09:58","modified_gmt":"2021-12-18T17:09:58","slug":"perform-nodered-action-on-server-start","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/perform-nodered-action-on-server-start\/","title":{"rendered":"HowTo: Node Red \u2013 Execute Action at ServerStart"},"content":{"rendered":"

Depending on how you configure your Node Red installation, it may be practical for it to notify you as soon as Node Red is restarted.
\nFor example, you will be informed about crashes and associated errors in your Node-Red configuration.<\/p>\n

How you set up such a status message is explained in the following article.<\/p>\n

\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Requirements<\/h2>\n

Helpful articles:
\n<\/strong>So that you can install new nodes, NodeRed should of course already be installed.
\nHow to prepare a RaspberryPi and then install NodeRed on it is described in the following articles.<\/p>\n

The following three articles describe what needs to be done to prepare the RaspberryPi:
\nRaspberryPi \u2013 setup for nerdiys!<\/a><\/strong><\/em>
\nRaspberryPi \u2013 The first configuration!
\n<\/a>RaspberryPi \u2013 Control the RaspberryPi via SSH<\/a><\/strong><\/em>
\nNodeRed \u2013 Installing NodeRed on the RaspberryPi<\/strong><\/em><\/a><\/p>\n

Required material:
\n<\/strong>-no-
\n<\/strong><\/p>\n

Required material:<\/strong><\/p>\n

In the following list you will find all the parts you need to implement this article.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n<\/div>\n
\n

Log into the NodeRed configuration interface<\/h2>\r\n

Before you can edit your NodeRed configuration, you must - if activated - first log into the NodeRed configuration interface.<\/p>\r\n

\"\"<\/a>
View of the login dialog. Here you have to enter the login data that you specified during the configuration of the login. You can find information about this in the article NodeRed - set up user login<\/strong><\/em><\/a>.<\/figcaption><\/figure>\n
\n

Node code example<\/h2>\n

In principle, the server start message \"only\" consists of an Inject node with a tick next to \"Inject once after ... seconds then...\". As described, this causes this Inject node to be executed after a restart.<\/p>\n

\"\"<\/a>
Here you can see the configuration of the inject node. By ticking \"Inject after...\", the node is executed after the restart of Node-Red. Delayed execution can also be set in the input field.<\/figcaption><\/figure>\n

The following node code prints a message about the debug node after the restart. The complete configuration is contained in the node code.<\/p>\n

\"\"<\/a><\/p>\n

Following code<\/p>\n

[{"id":"5c21935a.39e70c","type":"inject","z":"8c9f8f17.13eb78","name":"","topic":"","payload":"NodeRed just started!","payloadType":"str","repeat":"","crontab":"","once":true,"onceDelay":"","x":3530,"y" :240,"wires":[["b3fff434.c1a8c8"]]},{"id":"b3fff434.c1a8c8","type":"debug","z":"8c9f8f17.13eb78","name" :"","active":true,"console":"false","complete":"false","x":3710,"y":240,"wires":[]}]<\/pre>\n
\n
Node code example with Pushbullet message<\/h2>\n
A sensible combination is to combine the inject node with a pushbullet node. After a restart of Node-Red, a push bullet message is sent.
\nThis way you'll know when you're on the go whether your Node Red installation may have been restarted.<\/p>\n
You can find the node code for this in this example.<\/p>\n
\"\"<\/a><\/p>\n
[{"id":"a604fa0e.8c5138","type":"pushbullet","z":"8c9f8f17.13eb78","config":"5ab02a71.121594","pushtype":"note","title ":"","chan":"","name":"","x":3470,"y":380,"wires":[]},{"id":"3017f8fc.bcd818", "type":"inject","z":"8c9f8f17.13eb78","name":"","topic":"","payload":"NodeRed has just been started!","payloadType":"str ","repeat":"","crontab":"","once":true,"onceDelay":"","x":3270,"y":380,"wires":[["a604fa0e. 8c5138"]]},{"id":"5ab02a71.121594","type":"pushbullet-config","z":"","name":""}]<\/pre>\n
\n
Have fun with the project<\/h2>\r\n
I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n
PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
Depending on how you configure your Node-Red installation, it can be handy that it tells you when Node-Red is restarted. For example, you will be notified about crashes and [...]<\/p>","protected":false},"author":1,"featured_media":2345,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[149,113,24,61],"tags":[33,114,119,25,47,48,229,51],"class_list":["post-1260","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abendprojekt2h","category-node-red","category-raspberry-pi","category-smarthome","tag-automatisierung","tag-nodered","tag-pushbullet","tag-raspberrypi","tag-raspi","tag-raspian","tag-smart","tag-smarthome"],"yoast_head":"\nHowTo: Node Red - Aktion bei ServerStart ausf\u00fchren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/perform-nodered-action-on-server-start\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Node Red - Aktion bei ServerStart ausf\u00fchren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/perform-nodered-action-on-server-start\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-02-23T22:51:53+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-12-18T17:09:58+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"356\" \/>\n\t<meta property=\"og:image:height\" content=\"60\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Node Red – Aktion bei ServerStart ausf\u00fchren\",\"datePublished\":\"2019-02-23T22:51:53+00:00\",\"dateModified\":\"2021-12-18T17:09:58+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/\"},\"wordCount\":316,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1\",\"keywords\":[\"Automatisierung\",\"NodeRed\",\"Pushbullet\",\"Raspberry Pi\",\"RasPi\",\"Raspian\",\"Smart\",\"SmartHome\"],\"articleSection\":[\"Abendprojekt(<2h)\",\"Node Red\",\"Raspberry Pi\",\"SmartHome\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/\",\"name\":\"HowTo: Node Red - Aktion bei ServerStart ausf\u00fchren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1\",\"datePublished\":\"2019-02-23T22:51:53+00:00\",\"dateModified\":\"2021-12-18T17:09:58+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1\",\"width\":356,\"height\":60},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/es\\\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Node Red – Aktion bei ServerStart ausf\u00fchren\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Node Red - Execute action at ServerStart - nerdiy.de - DIY, Electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/perform-nodered-action-on-server-start\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: Node Red - Aktion bei ServerStart ausf\u00fchren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/perform-nodered-action-on-server-start\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2019-02-23T22:51:53+00:00","article_modified_time":"2021-12-18T17:09:58+00:00","og_image":[{"width":356,"height":60,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","type":"image\/png"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Node Red – Aktion bei ServerStart ausf\u00fchren","datePublished":"2019-02-23T22:51:53+00:00","dateModified":"2021-12-18T17:09:58+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/"},"wordCount":316,"commentCount":0,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","keywords":["Automatisierung","NodeRed","Pushbullet","Raspberry Pi","RasPi","Raspian","Smart","SmartHome"],"articleSection":["Abendprojekt(<2h)","Node Red","Raspberry Pi","SmartHome"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/","url":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/","name":"HowTo: Node Red - Execute action at ServerStart - nerdiy.de - DIY, Electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","datePublished":"2019-02-23T22:51:53+00:00","dateModified":"2021-12-18T17:09:58+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","width":356,"height":60},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/es\/realizar-una-accion-nodeada-en-el-inicio-del-servidor\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Node Red – Aktion bei ServerStart ausf\u00fchren"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-aktion-bei-serverstart-ausfuehren-chrome-2018-10-20-13-23-06.png?fit=356%2C60&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-kk","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":17804,"url":"https:\/\/nerdiy.de\/en\/read-out-howto-node-red-temperature-of-the-fritz-dect-repeater-100\/","url_meta":{"origin":1260,"position":0},"title":"HowTo: Node Red - Read out the temperature of the FRITZ! DECT Repeater 100","author":"Fab","date":"12. January 2022","format":false,"excerpt":"Den FRITZ! DECT Repeater habe ich mir vor kurzem zugelegt um die Telefonreichweite meiner DECT Telefone zu verbessern. Leider muss meine Fritz Box im Keller stehen, weil nur dort ein passender Anschluss ans Internet m\u00f6glich ist. Eigentlich kein Problem. Allerdings leidet darunter die Qualit\u00e4t bzw. Reichweite der DECT Verbindung zwischen\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-temperatur-des-fritz-dect-repeater-100-auslesen-dsc06179-scaled.jpg?fit=800%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-temperatur-des-fritz-dect-repeater-100-auslesen-dsc06179-scaled.jpg?fit=800%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-temperatur-des-fritz-dect-repeater-100-auslesen-dsc06179-scaled.jpg?fit=800%2C1200&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-temperatur-des-fritz-dect-repeater-100-auslesen-dsc06179-scaled.jpg?fit=800%2C1200&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":19635,"url":"https:\/\/nerdiy.de\/en\/howto-node-red-sma-sunny-solar-inverter-data-readout\/","url_meta":{"origin":1260,"position":1},"title":"HowTo: Node Red - Reading SMA Sunny Solar Inverter Data","author":"Fab","date":"2. February 2023","format":false,"excerpt":"In den Artikeln Daten einer SMA EV CHARGER 22 Wallbox auslesen und Node Red \u2013 SMA Sunny Home Manager Daten auslesen hatte ich bereits beschrieben wie man die jeweiligen Messdaten auslesen kann. Neben diesen SMA Ger\u00e4ten gibt es auch einen SMA Wechselrichter in meinem Netzwerk. Dessen Messdaten sich nat\u00fcrlich auch\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-node-red-sma-sunny-wechselrichter-daten-auslesen-chrome-tye135rbak.jpg?fit=1200%2C337&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-node-red-sma-sunny-wechselrichter-daten-auslesen-chrome-tye135rbak.jpg?fit=1200%2C337&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-node-red-sma-sunny-wechselrichter-daten-auslesen-chrome-tye135rbak.jpg?fit=1200%2C337&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-node-red-sma-sunny-wechselrichter-daten-auslesen-chrome-tye135rbak.jpg?fit=1200%2C337&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2023\/01\/www.nerdiy.de-howto-node-red-sma-sunny-wechselrichter-daten-auslesen-chrome-tye135rbak.jpg?fit=1200%2C337&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":18024,"url":"https:\/\/nerdiy.de\/en\/control-and-read-howto-nodered-fritz-dect-200-socket-using-nodered\/","url_meta":{"origin":1260,"position":2},"title":"HowTo: NodeRed - Control and read out FRITZ DECT 200 socket using NodeRed","author":"Fab","date":"26. January 2022","format":false,"excerpt":"Die FRITZ!Box ist nicht nur ein sehr guter Router f\u00fcr das Heimnetzwerk. Sie kann - ausgestattet mit dem passenden Smart Home Zubeh\u00f6r - auch zur Smart Home Zentrale Eures Hauses bzw. Wohnung werden. Dabei ist alles notwendige bereits in der FRITZ!Box verbaut. Neue Sensoren oder Aktoren werden einfach kabellos \u00fcber\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17601,"url":"https:\/\/nerdiy.de\/en\/howto-integrate-zigbee-ikea-fyrtur-roller-blind-e1757-via-zigbee2mqtt-in-node-red\/","url_meta":{"origin":1260,"position":3},"title":"HowTo: Integrate Zigbee \u2013 IKEA FYRTUR roller blind E1757 into Node Red via zigbee2mqtt","author":"Fab","date":"21. February 2023","format":false,"excerpt":"Das IKEA FYRTUR Rollo ist eine sehr einfache M\u00f6glichkeit, wie Ihr Eure Fenster mit einem leicht steuerbaren Rollo nachzur\u00fcsten. Dank Zigbee Anbindung k\u00f6nnt Ihr dies dann f\u00fcr alle M\u00f6glichen Szenerien nutzen. So l\u00e4sst sich zum Beispiel sehr leicht eine automatische \u00d6ffnung bei Sonnenaufgang oder auch ein automatisches Schlie\u00dfen sobald im\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":17450,"url":"https:\/\/nerdiy.de\/en\/howto-zigbee-ikea-styrbar-button-e2001-e2002-via-zigbee2mqtt-in-nodered-integrate-2\/","url_meta":{"origin":1260,"position":4},"title":"HowTo: Zigbee - IKEA STYRBAR push button E2001\/E2002 via zigbee2mqtt into NodeRed","author":"Fab","date":"19. January 2022","format":false,"excerpt":"Der IKEA STYRBAR Taster ist etwas gr\u00f6\u00dfer als der kleine Bruder der Ikea TRADFRI E1743 Taster. Daf\u00fcr bietet er aber auch ein paar mehr Funktion und - aufgrund der zwei eingesetzten AA Batterien - eine l\u00e4ngere Batterielebensdauer. Neben den einfachen Ein- und Aus-Tasten (bei denen auch lange Tastendr\u00fccke ausgewertet werden)\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17595,"url":"https:\/\/nerdiy.de\/en\/howto-node-red-send-push-messages-using-pushover-from-nodered-2\/","url_meta":{"origin":1260,"position":5},"title":"HowTo: Node Red - Sending push messages using Pushover from NodeRed","author":"Fab","date":"8. January 2022","format":false,"excerpt":"Bisher habe ich f\u00fcr die Benachrichtigungen von meinem SmartHome die Pushbullet Node genutzt. Leider ist die Pushbullet-App - also der Gegenpart auf Eurem Smartphone mit dem Ihr die Nachrichten empfangt - mittlerweile nicht mehr f\u00fcr iOS verf\u00fcgbar. Wollt Ihr Euch also auch auf Eurem iOS Ger\u00e4t \u00fcber die Ereignisse in\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-pushnachrichten-mithilfe-von-pushover-aus-nodered-versenden-signal-2022-01-08-201816-001-3.jpg?fit=561%2C262&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-pushnachrichten-mithilfe-von-pushover-aus-nodered-versenden-signal-2022-01-08-201816-001-3.jpg?fit=561%2C262&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-node-red-pushnachrichten-mithilfe-von-pushover-aus-nodered-versenden-signal-2022-01-08-201816-001-3.jpg?fit=561%2C262&ssl=1&resize=525%2C300 1.5x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1260","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=1260"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/1260\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/2345"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=1260"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=1260"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=1260"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}