{"id":14757,"date":"2021-03-10T16:08:38","date_gmt":"2021-03-10T15:08:38","guid":{"rendered":"https:\/\/nerdiy.de\/?p=14757"},"modified":"2021-03-10T16:09:26","modified_gmt":"2021-03-10T15:09:26","slug":"how-to-build-a-3d-printing-y-distributor-for-a-125mm-exhaust-hose","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/how-to-build-a-3d-printing-y-distributor-for-a-125mm-exhaust-hose\/","title":{"rendered":"HowTo: 3D Printing - Building a Y-distributor for a 125mm exhaust hose"},"content":{"rendered":"

While setting up the extraction system for my soldering station and the chamber of my 3D printer, I was faced with the problem that I had to somehow divide the suction port of the extraction system into two ways.<\/p>\n\n\n\n

The goal was to be able to control both the branch to my soldering area and the branch to the chamber of my 3D printer independently of each other. I wrote about that in the post Build a servo controlled 125mm butterfly valve<\/a><\/em><\/strong> and Build solder fume extraction hose incl. funnel yourself<\/a><\/em><\/strong> a few components have already been introduced.<\/p>\n\n\n\n

In order to be able to connect two butterfly valves to one intake port of my extraction system, I printed the Y adapter below. Three 125mm hose connections can be connected to this.<\/p>\n\n\n\n

How this is constructed and how it can be combined with the butterfly valves or the suction hose is described in the following article.<\/p>\n\n\n\n

\n\n\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n\n\n\n

\n\n\n\n

Requirements<\/h2>\n\n\n\n

To set it up you have to do some simple manual work.<\/p>\n\n\n\n

Required tool:<\/strong><\/p>\n\n\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n\n\n\n

Required material:<\/strong><\/p>\n\n\n\n

In the following list you will find all the parts you need for the assembly.<\/strong><\/p>\n\n\n

\n
\n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n\n\n\n
\n\n\n\n

Collect the necessary parts<\/h2>\n\n\n\n

Before you can start building, you should first collect all the necessary parts.<\/p>\n\n\n\n

\"\"<\/a><\/figure>
\n

For the assembly you need the following parts.<\/p>\n\n\n\n