{"id":17089,"date":"2021-10-10T15:47:27","date_gmt":"2021-10-10T13:47:27","guid":{"rendered":"https:\/\/nerdiy.de\/?p=17089"},"modified":"2021-11-23T16:06:05","modified_gmt":"2021-11-23T15:06:05","slug":"howto-pcb-set-up-the-anemosens-sensor-pcb-2","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/howto-pcb-set-up-the-anemosens-sensor-pcb-2\/","title":{"rendered":"HowTo: PCB - Building the Anemosens Sensor PCB"},"content":{"rendered":"

The Anemosens sensor PCB is the basis for the sensor setup of Anemosens a 3D printed anemometer that I developed for the second version of WinDIY.<\/p>\n\n\n\n

For this purpose, an AH49E Hall sensor and an AS5048B I2C 14 bit \"magnetic rotary encoder\" are installed on the PCB. The AS5048B is used to determine the wind direction. The AH49E Hall sensor can be used to measure the wind speed by measuring the time of one complete revolution of the wind blades.<\/p>\n\n\n\n

To assemble the PCB, it is divided into two parts at the prepared points and soldered together at a 90\u00b0 angle. The finished PCB can then be installed in the 3D printed housing from Anemosens and fixed with three M2x6 screws.<\/p>\n\n\n\n

I bought the board from the board manufacturer PCBWay.com<\/a><\/em><\/strong> which has provided me with these free of charge. At this point, thank you again for the great service and cooperation \ud83d\ude42.<\/p>\n\n\n\n

In the following you can see some pictures of the finished board and all possible components.<\/p>\n\n\n\n