{"id":202,"date":"2018-02-22T22:05:01","date_gmt":"2018-02-22T21:05:01","guid":{"rendered":"http:\/\/www.fabinv.de\/?p=202"},"modified":"2021-11-23T16:16:40","modified_gmt":"2021-11-23T15:16:40","slug":"fhem-nanocul-install","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/fhem-nanocul-install\/","title":{"rendered":"HowTo: FHEM \u2013 install nanoCul"},"content":{"rendered":"

A smart home system is only really fun when it can communicate with other components.
\nSince many systems use radio connections for communication, it is only logical to make FHEM radio-capable as soon as possible.<\/p>\n

In addition to WLAN and Bluetooth, most sensors and actuators in the smart home sector use frequencies in the 433 or 866 MHz range.
\nThe last two are also used by various radio weather stations, shutter controls, motor controls, etc..<\/p>\n

There are two ways to make FHEM radio-capable:
\n1. you buy a ready-made USB to wireless adapter which is ready-built but also expensive.
\n2. build your own USB to wireless adapter and save a lot of money.<\/p>\n

Do-it-yourself is no problem in this case, because there is again a splendid open-source project for this:
\nThe nanoCul.
\nThe nanoCul is a USB-to-radio adapter that can be soldered and programmed from simple standard components. How the assembly works I have described in this article.<\/p>\n

\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Requirements<\/h2>\n

Helpful articles:
\n<\/strong>Before you can start with the installation of the nanoCul you should prepare the RaspberryPi so that it is accessible via Putty and FHEM is installed on it.
\nThe following three articles describe what needs to be done to prepare the RaspberryPi:
\nRaspberryPi \u2013 setup for nerdiys!<\/a><\/strong><\/em>
\nRaspberryPI - The First Configuration!
\n<\/a>Your own smart home - installation and introduction to FHEM
\n<\/a><\/strong><\/em>RaspberryPi \u2013 Control the RaspberryPi via SSH<\/strong><\/em><\/a><\/p>\n

Required material:
\n<\/strong>-no-<\/p>\n

Required material:<\/strong><\/p>\n

In the following list you will find all the parts you need to implement this article.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Structure of the nanoCul<\/h2>\n

The nanoCul essentially consists of four important components:<\/p>\n

1. the CC1101 radio module: This is available for 433Mhz as well as for 866Mhz.
\n2. a level converter: Since the CC1101 radio module(3,3V) and the Arduino Nano(5V) work with different logic levels, they have to be adjusted respectively.
\n3. an Arduino Nano: a microcontroller that is relatively easy to program and operate via the USB interface.
\n4. the circuit board on which everything is soldered together.
\n5. optional: a housing so that the whole thing is also protected.<\/p>\n

\"\"<\/a><\/p>\n

\n

Connect nanoCul to the RaspberryPi<\/h2>\n
\"\"<\/a>
To connect the nanoCul to the RaspberryPi you have to connect the nanoCul with the RaspberryPi via a USB cable. This can be (depending on the equipment of the Arduino Nano used) a micro or mini USB cable.<\/figcaption><\/figure>\n
\"\"<\/a>
Plug the USB cable into the RaspberryPi. (It doesn't matter which USB port you use on the RaspberryPi).<\/figcaption><\/figure>\n
\"\"<\/a>
Plug the USB cable into the nanoCul. As soon as your RaspberryPi is turned on, at least one LED on the nanoCul should light up. If this bothers you, you can either cover the LED on the nanoCul with tape, paint over it with a good covering pen or desolder it.<\/figcaption><\/figure>\n
\n

Install AVR C-Cross Compiler<\/h2>\n

To adapt the firmware(quasi the operating system of the nanoCul) to our needs, we have to compile it ourselves. First we have to install the AVR C-Cross Compiler.
\nAfter you have logged in via Putty<\/a> <\/strong><\/em>logged in on the RasPi you can do this with the following command.<\/p>\n

sudo apt-get install make gcc-avr avrdude avr-libc<\/pre>\n
\"\"<\/a><\/p>\n
During the installation you may be asked if you agree that the installation will use additional disk space. Confirm this request with a \"j\" and Enter. The installation will then continue.<\/p>\n
\n
\n
nanoCul- Download Firmware<\/h2>\n
To download the latest firmware for the nanoCul you have to find the current link first. To do this go to: https:\/\/sourceforge.net\/p\/culfw\/code\/HEAD\/tarball<\/a><\/strong><\/em><\/p>\n
\"\"<\/a>
There a download window will pop up first. Close this window, because you want to download the code to the RaspberryPi and not to your computer.<\/figcaption><\/figure>\n
\"\"<\/a>
Now copy the download link by clicking with the right mouse button on \"direct link\" and then on \"copy link address\". The link is now in your clipboard and you can paste it into Putty. Before you click enter in Putty you have to put a \"wget\" in front of it so that the RasPi knows that it should download the file specified in the link.<\/figcaption><\/figure>\n
For example, the full command would look like this for the current version(556):<\/p>\n
wget https:\/\/sourceforge.net\/projects\/culfw\/<\/pre>\n
\"\"<\/a><\/p>\n
The RasPi then downloads the file and shows the progress in a small animation.<\/p>\n
\n
Unpack firmware<\/h2>\n
The downloaded firmware is now still hidden in a zip archive. In order to continue working with it, we have to unzip it first.
\nThis can be done (with the current version) with the command:<\/p>\n
unzip culfw-code-566-trunk.zip<\/pre>\n
\"\"<\/a><\/p>\n
If the version (in the example 566) has changed in the meantime you have to adjust the part behind the \"unzip\" according to your version.<\/p>\n
\n
Change to the folder with the firmware<\/h2>\n
Now you have to change to the folder you just created by unpacking.
\nThe command to do this is:<\/p>\n
cd culfw-code-566-trunk\/culfw\/Devices\/nanoCUL<\/pre>\n
\"\"
\n<\/a>Here is again the part with the \"566\" to note, whether the version has possibly changed with you<\/p>\n
\n
Set board.h correctly<\/h2>\n
Before we compile the firmware, we need to set the parameters to it
\ncorrectly. This is done in the file \"board.h\". This is located
\nin the folder you just changed to.
\nWith the command<\/p>\n
sudo nano board.h<\/pre>\n
you get to the text editor \"nano\" and can use it to edit the file
\nEdit \"board.h\".
\nDon't be alarmed: The console view disappears and everything looks a little different.<\/p>\n
\"\"<\/a><\/p>\n
\"\"<\/a><\/p>\n
Various parameters can now be set here. For example the clock frequency of the microcontroller or the radio frequency of the radio module.<\/p>\n
If you want to use a radio module with 433Mhz and your microcontroller or the Arduino board corresponds to an Arduino you don't need to change anything here.<\/p>\n
If you use a radio module with 866Mhz you have to change the following part.
\nNavigate with the arrow keys of your keyboard to the place \"#define HAS_CC1100_433\" and write \"\/\/\" in front of it.
\nThis comments out this part and tells the compiler to use the
\nFirmware should be assembled in such a way that it is not suitable for a 433Mhz but a
\nis to be configured for an 866Mhz radio adapter.<\/p>\n
To save your changes in the board.h file press CTRL+X, then press
\n\"j\" (because you want to save the changed file) and then click on
\nEnter. Nano will close and you will be back in the console.<\/p>\n
\n
Assemble (have assembled) firmware<\/h2>\n
This step is easy. The command to do this is:<\/p>\n
make<\/pre>\n
\"\"<\/a><\/p>\n
This command causes the firmware you just configured to be compiled now. This means that the code that is readable for us humans is translated into machine language and can then be programmed into the microcontroller of the nanoCul in the next step.<\/p>\n
\n
Program firmware<\/h2>\n
After the firmware has been compiled, it is now time to program it into the microcontroller of the nanoCul.
\nTo do this, you need to enter the following command:<\/p>\n
make program<\/pre>\n
\"\"<\/a><\/p>\n
The microcontroller is programmed and the programmed code is checked again afterwards.<\/p>\n
\n
Find out the ID of the nanoCul<\/h2>\n
In order to register the nanoCul in FHEM, we first have to find out its unique ID.
\nThis is important because otherwise there could be conflicts if for example two nanoCuls are connected to one RaspberryPi. (e.g. because you want to operate one for 433Mhz and one for 866Mhz).
\nTo get the correct ID nothing should be connected to the RaspberryPi besides the nanoCul.
\nThe ID of the nanoCul can be found out with the following command:<\/p>\n
ls \/dev\/serial\/by-id<\/pre>\n
\"\"<\/a><\/p>\n
Thereupon an ID is output. In my case it is the \"usb-1a86_USB2.0-Serial-if00-port0\". Of course this ID can be different for you. We have to remember this ID now, because it is needed for the next step.<\/p>\n
\n
\n
Register nanoCul in FHEM<\/h2>\n
To register the nanoCul in FHEM you have to switch to the web interface of FHEM. There is an input field in the upper area where we can enter the definition of the nanoCul.
\nThis definition reads:<\/p>\n
define nanoCUL CUL \/dev\/serial\/by-id\/usb-1a86_USB2.0-Serial-if00-port0@38400 1234<\/pre>\n
Here \"nanoCul\" stands for the name of your nanoCul in FHEM. So you can also choose another name here.
\n\"CUL\" describes the function of the defined device and must not be changed.
\n\"\/dev\/serial\/by-id\/usb-1a86_USB2.0-Serial-if00-port0\"
\nstands for the interface to the nanoCul. You must now click here
\nmake sure that you use the ID determined in the previous step.
\n\"@38400\"
\nstands for the baud rate(~speed) with which FHEM is connected to the nanoCul
\ncommunicated. This value must correspond to 38400.
\n\"1234\" is a code that is actually only needed when the nanoCUL FHT diagrams
\nshould send. Then this must be adapted accordingly. Either way, this must also be specified.<\/p>\n
\"\"<\/a>
If you have \"assembled\" your definition of your ID accordingly, you only have to transfer it into the text field in FHEM and press Enter.<\/figcaption><\/figure>\n
\"\"<\/a>
You will be redirected to this overview of the just created nanoCUL. Here you can set everything important concerning the nanoCUL.<\/figcaption><\/figure>\n
\"\"<\/a>
To test if the nanoCul has been detected successfully set \"get nanoCul ...\" to \"get nanoCul version\" and click on \"get\".<\/figcaption><\/figure>\n
\"\"<\/a>
You should get a message like: \"nanoCUL version => V 1.67 nanoCUL868\". If you don't get an answer check the ID of your nanoCul again as described in step 9. Otherwise it sometimes helps to disconnect the nanoCul from the RaspberryPi and reconnect it or to reprogram the nanoCul. Also a reboot of the RasPi often solves the problem.<\/figcaption><\/figure>\n
If everything works remember to save your FHEM configuration by clicking on \"Save Config\" in the left bar.<\/p>\n
So you should now have a nanoCul connected to your RaspberryPi and logged into FHEM.<\/p>\n
\n
Have fun with the project<\/h2>\r\n
I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n
PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
A smart home system is only really fun when it can communicate with other components. Since many systems use wireless connections for communication, it is only logical to start using FHEM as soon as possible.<\/p>","protected":false},"author":1,"featured_media":386,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[149,56,57,24,61],"tags":[33,35,43,46,25,47,51],"class_list":["post-202","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abendprojekt2h","category-arduino","category-fhem","category-raspberry-pi","category-smarthome","tag-automatisierung","tag-fhem","tag-nanocul","tag-putty","tag-raspberrypi","tag-raspi","tag-smarthome"],"yoast_head":"\nHowTo: FHEM \u2013 nanoCul installieren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/fhem-nanocul-install\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: FHEM \u2013 nanoCul installieren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/fhem-nanocul-install\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2018-02-22T21:05:01+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-11-23T15:16:40+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"1920\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: FHEM \u2013 nanoCul installieren\",\"datePublished\":\"2018-02-22T21:05:01+00:00\",\"dateModified\":\"2021-11-23T15:16:40+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/\"},\"wordCount\":1627,\"commentCount\":12,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/02\\\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1\",\"keywords\":[\"Automatisierung\",\"FHEM\",\"nanoCul\",\"PuTTy\",\"Raspberry Pi\",\"RasPi\",\"SmartHome\"],\"articleSection\":[\"Abendprojekt(<2h)\",\"Arduino\",\"FHEM\",\"Raspberry Pi\",\"SmartHome\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/\",\"name\":\"HowTo: FHEM \u2013 nanoCul installieren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/02\\\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1\",\"datePublished\":\"2018-02-22T21:05:01+00:00\",\"dateModified\":\"2021-11-23T15:16:40+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/02\\\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/02\\\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1\",\"width\":2560,\"height\":1920},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/fhem-nanocul-installieren\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: FHEM \u2013 nanoCul installieren\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Install FHEM - nanoCul - nerdiy.de - DIY, electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/fhem-nanocul-install\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: FHEM \u2013 nanoCul installieren - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/fhem-nanocul-install\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2018-02-22T21:05:01+00:00","article_modified_time":"2021-11-23T15:16:40+00:00","og_image":[{"width":2560,"height":1920,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","type":"image\/jpeg"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: FHEM \u2013 nanoCul installieren","datePublished":"2018-02-22T21:05:01+00:00","dateModified":"2021-11-23T15:16:40+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/"},"wordCount":1627,"commentCount":12,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","keywords":["Automatisierung","FHEM","nanoCul","PuTTy","Raspberry Pi","RasPi","SmartHome"],"articleSection":["Abendprojekt(<2h)","Arduino","FHEM","Raspberry Pi","SmartHome"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/","url":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/","name":"HowTo: Install FHEM - nanoCul - nerdiy.de - DIY, electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","datePublished":"2018-02-22T21:05:01+00:00","dateModified":"2021-11-23T15:16:40+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","width":2560,"height":1920},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/de_de\/fhem-nanocul-installieren\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: FHEM \u2013 nanoCul installieren"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/20171107_160724-1-scaled.jpg?fit=2560%2C1920&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-3g","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":205,"url":"https:\/\/nerdiy.de\/en\/your-own-smart-home-installation-and-entry-into-fhem\/","url_meta":{"origin":202,"position":0},"title":"HowTo: FHEM \u2013 Installation on the RaspberryPi","author":"Fab","date":"21. February 2018","format":false,"excerpt":"Eine Begriff \u00fcber den man im t\u00e4glichen Leben immer \u00f6fter stolpert ist \"SmartHome\". Aber was verbirgt sich dahinter? Und brauche ich das unbedingt? Smart-Home(=Intelligentes Zuhause) ist dabei ein Oberbegriff f\u00fcr die Vernetzung diverser Ger\u00e4te im Haushalt. Die Idealvorstellung dabei ist, dass immer mehr Ger\u00e4te im Haushalt miteinander kommunizieren, Daten austauschen\u2026","rel":"","context":"In "FHEM"","block_context":{"text":"FHEM","link":"https:\/\/nerdiy.de\/en\/category\/fhem\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-219.png?fit=661%2C420&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-219.png?fit=661%2C420&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-219.png?fit=661%2C420&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":197,"url":"https:\/\/nerdiy.de\/en\/install-fhem-mqtt-module\/","url_meta":{"origin":202,"position":1},"title":"HowTo: Install FHEM \u2013 MQTT module","author":"Fab","date":"12. February 2018","format":false,"excerpt":"In dem Artikel RaspberryPi - MQTT Server auf dem RaspberryPi installieren\u00a0hatte ich ein wenig zu MQTT geschrieben und erkl\u00e4rt wie man einen eigenen MQTT Server auf dem RaspberryPi installiert. Damit ihr einen MQTT Server auch aus FHEM heraus nutzen k\u00f6nnt, m\u00fcsst ihr allerdings noch ein paar FHEM-Module installieren. Wie das\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-180.png?fit=873%2C596&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-180.png?fit=873%2C596&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-180.png?fit=873%2C596&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/02\/Screenshot-180.png?fit=873%2C596&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":3722,"url":"https:\/\/nerdiy.de\/en\/secure-fhem-access-to-the-configuration-interface\/","url_meta":{"origin":202,"position":2},"title":"HowTo: FHEM - Securing access to the configuration interface","author":"Fab","date":"7. March 2019","format":false,"excerpt":"Sp\u00e4testens nachdem Ihr die ersten Konfigurationen in Eurer FHEM-Oberfl\u00e4che vorgenommen habt solltet Ihr euch auch mit dem Thema Sicherheit auseinandersetzen. Es ist n\u00e4mlich wirklich \u00e4rgerlich, wenn Ihr die m\u00fchsam zusammengetragenen und fein s\u00e4uberlich einprogrammierten Funktionen Eures SmartHome-Systems verliert. Sei es durch Datenverlust oder weil andere Personen unberechtigterweise Zugriff auf Euer\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-zugang-zur-konfigurationsoberflaeche-absichern-chrome-2018-12-10-23-31-01.png?fit=1200%2C594&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-zugang-zur-konfigurationsoberflaeche-absichern-chrome-2018-12-10-23-31-01.png?fit=1200%2C594&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-zugang-zur-konfigurationsoberflaeche-absichern-chrome-2018-12-10-23-31-01.png?fit=1200%2C594&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-zugang-zur-konfigurationsoberflaeche-absichern-chrome-2018-12-10-23-31-01.png?fit=1200%2C594&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-zugang-zur-konfigurationsoberflaeche-absichern-chrome-2018-12-10-23-31-01.png?fit=1200%2C594&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":190,"url":"https:\/\/nerdiy.de\/en\/fhem-construction-modules-worth-knowing-2\/","url_meta":{"origin":202,"position":3},"title":"HowTo: FHEM - structure, modules & things worth knowing","author":"Fab","date":"7. March 2019","format":false,"excerpt":"Nachdem ich FHEM das erste Mal installiert hatte und die Konfigurationsseite wirklich Erreichbar war, war die Euphorie gro\u00df. Nachdem ich ein bisschen darauf rumgeklickt hatte wurde diese Euphorie aber schnell durch Ratlosigkeit verdr\u00e4ngt. FHEM ist ein m\u00e4chtiges und dazu sehr gut gepflegtes Werkzeug um verschiedene Heimautomatisierungsger\u00e4te miteinander zu verbinden. Nur\u2026","rel":"","context":"In "FHEM"","block_context":{"text":"FHEM","link":"https:\/\/nerdiy.de\/en\/category\/fhem\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-aufbau-module-wissenswertes-firefox-2019-05-14-10-14-57.png?fit=1121%2C575&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-aufbau-module-wissenswertes-firefox-2019-05-14-10-14-57.png?fit=1121%2C575&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-aufbau-module-wissenswertes-firefox-2019-05-14-10-14-57.png?fit=1121%2C575&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-aufbau-module-wissenswertes-firefox-2019-05-14-10-14-57.png?fit=1121%2C575&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-fhem-aufbau-module-wissenswertes-firefox-2019-05-14-10-14-57.png?fit=1121%2C575&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":18024,"url":"https:\/\/nerdiy.de\/en\/control-and-read-howto-nodered-fritz-dect-200-socket-using-nodered\/","url_meta":{"origin":202,"position":4},"title":"HowTo: NodeRed - Control and read out FRITZ DECT 200 socket using NodeRed","author":"Fab","date":"26. January 2022","format":false,"excerpt":"Die FRITZ!Box ist nicht nur ein sehr guter Router f\u00fcr das Heimnetzwerk. Sie kann - ausgestattet mit dem passenden Smart Home Zubeh\u00f6r - auch zur Smart Home Zentrale Eures Hauses bzw. Wohnung werden. Dabei ist alles notwendige bereits in der FRITZ!Box verbaut. Neue Sensoren oder Aktoren werden einfach kabellos \u00fcber\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-nodered-fritz-dect-200-steckdose-mithilfe-von-nodered-steuern-20220119-192507.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":3741,"url":"https:\/\/nerdiy.de\/en\/create-fhem-mqtt-devices\/","url_meta":{"origin":202,"position":5},"title":"HowTo: FHEM \u2013 Create MQTT devices","author":"Fab","date":"7. March 2019","format":false,"excerpt":"In dem Artikel RaspberryPi - MQTT Server auf dem RaspberryPi installieren hatte ich ein wenig zu MQTT geschrieben und erkl\u00e4rt wie man einen eigenen MQTT Server auf dem RaspberryPi installiert. Damit ihr einen MQTT Server auch aus FHEM heraus nutzen k\u00f6nnt, m\u00fcsst ihr allerdings noch ein paar FHEM-Module installieren. Wie\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-howto-fhem-mqtt-geraete-anlegen-firefox-2019-05-14-12-42-00.png?fit=765%2C574&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-howto-fhem-mqtt-geraete-anlegen-firefox-2019-05-14-12-42-00.png?fit=765%2C574&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-howto-fhem-mqtt-geraete-anlegen-firefox-2019-05-14-12-42-00.png?fit=765%2C574&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-howto-fhem-mqtt-geraete-anlegen-firefox-2019-05-14-12-42-00.png?fit=765%2C574&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/202","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=202"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/202\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/386"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=202"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=202"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=202"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}