{"id":3027,"date":"2019-02-28T18:26:13","date_gmt":"2019-02-28T17:26:13","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=3027"},"modified":"2021-12-18T17:39:03","modified_gmt":"2021-12-18T16:39:03","slug":"control-nodered-devices-with-apple-homekit-and-read-sensors-2","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/control-nodered-devices-with-apple-homekit-and-read-sensors-2\/","title":{"rendered":"HowTo: Node Red \u2013 Control devices with Apple HomeKit and read sensors"},"content":{"rendered":"

You can curse or idolize Apple devices, but what Apple has done very well is to integrate SmartHome components into their operating systems. For example, iOs comes with the option of controlling HomeKit devices (this is how SmartHome components are referred to in the Apple universe) via iOs.<\/p>\n

It is also practical that you can simulate these HomeKit devices with NodeRed (and the matching Node). This allows you to control the actuators of your SmartHome from your iOs device and even display the sensor data (e.g. temperature, humidity) of the SmartHome.<\/p>\n

The following article explains how to do this and what you need to bear in mind.<\/p>\n

\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Requirements<\/h2>\n

Helpful articles:
\n<\/strong>Before you start with this article, you should have prepared the RaspberryPi so that it is accessible via the network and controllable via SSH. NodeRed must also be installed.<\/p>\n

The following three articles describe what needs to be done to prepare the RaspberryPi:
\nRaspberryPi \u2013 setup for nerdiys!<\/a><\/strong><\/em>
\nRaspberryPi \u2013 The first configuration!
\n<\/a><\/strong><\/em>RaspberryPi \u2013 Control the RaspberryPi via SSH<\/strong><\/em><\/a>
\nNodeRed \u2013 Installing NodeRed on the RaspberryPi<\/em><\/strong><\/a>
\nNodeRed \u2013 Install new nodes<\/em><\/strong><\/a><\/p>\n

Required tool:
\n<\/strong>-no-<\/p>\n

Required material:<\/strong><\/p>\n

In the following list you will find all the parts you need to implement this article.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Log into the NodeRed configuration interface<\/h2>\r\n

Before you can edit your NodeRed configuration, you must - if activated - first log into the NodeRed configuration interface.<\/p>\r\n

\"\"<\/a>
View of the login dialog. Here you have to enter the login data that you specified during the configuration of the login. You can find information about this in the article NodeRed - set up user login<\/strong><\/em><\/a>.<\/figcaption><\/figure>\n
\n

Installation of the required node<\/h2>\n

So that you can simulate Homekit devices, the appropriate node must of course first be installed. To do this, install the node \"node-red-contrib-homekit\". How to install nodes is described in the article NodeRed \u2013 Install new nodes<\/em><\/strong><\/a> explained.<\/p>\n

node-red-contrib-homekit<\/pre>\n
\"\"<\/a>
Installation of the node \"node-red-contrib-homekit\".<\/figcaption><\/figure>\n
\n
Read motion detector<\/h2>\n
A small example node code to be informed about the status of a motion detector could look like this. To simulate the motion detector, the \"Inject\" nodes \"true\" and \"false\" are installed, which simulate a motion detector-is-activated signal (true) and a motion detector-is-not-activated signal (false). You can then \"connect\" a motion detector to these inputs, whose signals are then displayed via HomeKit.<\/p>\n
There is also an Inject node with the name \"requestOptions\". If you click on it, all the properties of this HomeKit device are displayed in the debug bar.<\/p>\n
\"\"<\/a>
View of the NodeCode.<\/figcaption><\/figure>\n
[{\"id\": \"9998cf7e.5cf8e\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"a10e8039.50d9c\",\"name\":\"BewegungsmelderBad\",\"serviceName\":\"MotionSensor\",\"x\":740,\"y\":820,\"wires\":[[\"9dcd9414.118448\"]]},{\"id\":\"18fa3044.4d02d\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":550,\"y\":820,\"wires\":[[\"9998cf7e.5cf8e\"]]},{\"id\":\"2fea5d63.ae8852\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"MotionDetected\":{{payload}}}\",\"output\":\"str\",\"x\":400,\"y\":820,\"wires\":[[\"18fa3044.4d02d\"]]},{\"id\":\"c568f55f.d8e828\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"true\",\"payloadType\":\"bool\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":190,\"y\":800,\"wires\":[[\"2fea5d63.ae8852\"]]},{\"id\":\"9dcd9414.118448\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":930,\"y\":820,\"wires\":[]},{\"id\":\"46dbd92c.8000e8\", \"type\": \"inject\", \"z\": \"5dcffcbc.bae6c4\", \"name\":\"\", \"topic\":\"\", \"payload\": \"false\", \"payloadType\": \"bool\", \"repeat\":\"\", \"crontab\":\"\", \"once\":false, \"onceDelay\":0.1,\"x\":190,\"y\":840,\"wires\":[[\"2fea5d63.ae8852\"]]},{\"id\":\"39aee99f.957496\",\"type\":\"comment\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Bewegungsmelder als Event\",\"info\":\"\",\"x\":220,\"y\":740,\"wires\":[]},{\"id\":\"769255e1.22b44c\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":550,\"y\":860,\"wires\":[[\"9998cf7e.5cf8e\"]]},{\"id\":\"fdd0e0c1.c5117\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":400,\"y\":860,\"wires\":[[\"769255e1.22b44c\"]]},{\"id\":\"40c3c829.e4f308\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"requestOptions\",\"topic\":\"\",\"payload\":\"true\",\"payloadType\":\"bool\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":220,\"y\":900,\"wires\":[[\"fdd0e0c1.c5117\"]]},{\"id\":\"a10e8039.50d9c\", \"type\": \"homekit-accessory\", \"z\":\"\", \"accessoryName\": \"Sensors\", \"pinCode\": \"111-11-111\", \"port\": \"32304\", \"manufacturer\": \"Nerdiy.de\", \"model\": \"Default Model\", \"serialNo\": \"Default Serial Number\", \"accessoryType\": \"10\"}]<\/pre>\n
For this NodeCode to work, you still need to configure the HomeKit accessory and the service. To do this, double-click on the \"Motion detector bathroom\" node. This opens the following menu.<\/p>\n
\"\"<\/a>
There you set the \"MotionSensor\" in the \"Service\" section and then click on the pen icon in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
There you can\/must now enter data that is important for the later configuration in iOS. Enter all the data as shown. However, you will of course change the pin code to one that only you personally know. This must also be entered in the format XXX-XX-XXX. The entry for \"Port\" indicates the port under which the HomeKit device can later be reached. You do not necessarily have to specify this explicitly. NodeRed will then select a random port. However, this has the disadvantage that a HomeKit device once connected to iOS is assigned a different port after a restart of NodeRed and must therefore be reconnected in iOS. You can avoid this by assigning a fixed port. For Type, it is recommended to set \"SENSOR\", because in this case you are also using a sensor. You can enter all other details as you wish.<\/figcaption><\/figure>\n
Once you have entered all this data, click on \"Add\" and \"Done\" to apply this setting. The last section of this article explains how to register the HomeKit devices in iOS.<\/p>\n
\n
Setting the heating thermostats<\/h2>\n
Here is an example node code of how you can forward the information from a heating thermostat to a simulated HomeKit thermostat, for example. There are (in this example) two properties that are displayed on your iOS device. One is the set target temperature and the other is the current actual temperature. Both values can be simulated via the Inject nodes. At this point, you would therefore have to replace the inject nodes with the values of your real heating thermostat.<\/p>\n
On the other hand, the values that you send to the simulated HomeKit device via the iOS HomeKit app are output via the debug node. This is where the values to be set could be forwarded to the heating thermostat.<\/p>\n
There is also another Inject node with the name \"requestOptions\". If you click on it, all the properties of this HomeKit device are displayed in the debug bar.<\/p>\n
\"\"<\/a>
View of the NodeCode.<\/figcaption><\/figure>\n
[{\"id\":\"b3001d65.5105f\",\"type\":\"comment\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Heizungsthermostate steuern\",\"info\":\"\",\"x\":220,\"y\":1300,\"wires\":[]},{\"id\":\"b12f3ad3.c1ef68\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"39b8cf37.35a27\",\"name\":\"Heizung\",\"serviceName\":\"Thermostat\",\"x\":740,\"y\":1480,\"wires\":[[\"3cb1fd5c.fd60c2\"]]},{\"id\":\"8d9e79f3.0de618\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":590,\"y\":1480,\"wires\":[[\"b12f3ad3.c1ef68\"]]},{\"id\":\"7e9e340b.320a5c\", \"type\": \"template\", \"z\": \"5dcffcbc.bae6c4\",\"name\":\"Soll-Temp\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"TargetTemperature\": {{payload}}}\",\"output\":\"str\",\"x\":420,\"y\":1460,\"wires\":[[\"8d9e79f3.0de618\"]]},{\"id\":\"3cb1fd5c.fd60c2\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"payload.TargetTemperature\",\"tot\":\"msg\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":940,\"y\":1480,\"wires\":[[\"4ca89ee5.5cd2d\"]]},{\"id\":\"4ca89ee5.5cd2d\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":1130,\"y\":1480,\"wires\":[]},{\"id\":\"129c9403.2c229c\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Ist-Temp\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"CurrentTemperature\":{{payload}}}\",\"output\":\"str\",\"x\":420,\"y\":1500,\"wires\":[[\"8d9e79f3.0de618\"]]},{\"id\":\"182c1f88.f4e04\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"30\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1600,\"wires\":[[\"129c9403.2c229c\"]]},{\"id\":\"93979569.ae6e68\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"20\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1560,\"wires\":[[\"129c9403.2c229c\"]]},{\"id\":\"f2fdf87d.6e9be8\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"10\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1520,\"wires\":[[\"129c9403.2c229c\"]]},{\"id\":\"ccdae584.bd2dd8\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"30\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1440,\"wires\":[[\"7e9e340b.320a5c\"]]},{\"id\":\"820780bd.32628\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"20\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1400,\"wires\":[[\"7e9e340b.320a5c\"]]},{\"id\":\"fafe7787.64f6c8\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"10\",\"payloadType\":\"num\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":230,\"y\":1360,\"wires\":[[\"7e9e340b.320a5c\"]]},{\"id\":\"78c76a0a.b7b7f4\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":590,\"y\":1620,\"wires\":[[\"b12f3ad3.c1ef68\"]]},{\"id\":\"a6b574ca.dc1c98\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":440,\"y\":1620,\"wires\":[[\"78c76a0a.b7b7f4\"]]},{\"id\":\"63397e19.508ff\", \"type\": \"inject\", \"z\": \"5dcffcbc.bae6c4\", \"name\": \"requestOptions\", \"topic\":\"\", \"payload\": \"true\", \"payloadType\": \"bool\", \"repeat\":\"\", \"crontab\":\"\", \"once\":false, \"onceDelay\":0.1,\"x\":260,\"y\":1660,\"wires\":[[\"a6b574ca.dc1c98\"]]},{\"id\":\"39b8cf37.35a27\",\"type\":\"homekit-accessory\",\"z\":\"\",\"accessoryName\":\"Heizung\",\"pinCode\":\"111-11-111\",\"port\":\"32305\",\"manufacturer\":\"Nerdiy.de\",\"model\":\"Default Model\",\"serialNo\":\"Default Serial Number\",\"accessoryType\":\"9\"}]<\/pre>\n
As with the motion detector, you also need to configure the HomeKit accessory and the service for this NodeCode. To do this, double-click on the \"Heating\" node. This will open the following menu again.<\/p>\n
\"\"<\/a>
There you set the service to Thermostat. Then click on the pencil icon again in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
The setting process is the same as for the motion detector example. The only difference now is that you select a different port number than in the motion detector configuration (ideally simply the next port after the port set for the motion detector) and of course set the type to \"THERMOSTAT\".<\/figcaption><\/figure>\n
\"\"<\/a><\/p>\n
\n
Read out temperature and humidity sensors<\/h2>\n
This NodeCode example shows how to simulate a humidity and temperature sensor with the HomeKit node. The HomeKit node uses the data from \"openweathermap\" as a \"data source\". This means that the current temperatures of the location set in the openweathermap node are displayed.<\/p>\n
As with all other examples, there is also an Inject node with the name \"requestOptions\". If you click on it, all the properties of this HomeKit device are displayed in the debug bar.<\/p>\n
\"\"<\/a>
View of the NodeCode.<\/figcaption><\/figure>\n
[{\"id\":\"cc6c7b40.da9078\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"bd29e027.b0d63\",\"name\":\"Temperatur\",\"serviceName\":\"TemperatureSensor\",\"x\":1130,\"y\":1100,\"wires\":[[\"7a89e1f4.1dc75\"]]},{\"id\":\"3b22973d.547ac8\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"2dc17d94.90bc32\",\"name\":\"Luftfeuchtigkeit\",\"serviceName\":\"HumiditySensor\",\"x\":1140,\"y\":1180,\"wires\":[[\"195b33c9.57261c\"]]},{\"id\":\"7a89e1f4.1dc75\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":1290,\"y\":1100,\"wires\":[]},{\"id\":\"1c8b89c4.9270b6\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":970,\"y\":1120,\"wires\":[[\"cc6c7b40.da9078\"]]},{\"id\":\"a3736df8.87e9c\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":970,\"y\":1160,\"wires\":[[\"3b22973d.547ac8\"]]},{\"id\":\"400e1113.e2f29\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"CurrentRelativeHumidity\":\"{{payload}}\"}\",\"output\":\"str\",\"x\":820,\"y\":1160,\"wires\":[[\"a3736df8.87e9c\"]]},{\"id\":\"bf9000c2.be6a8\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"CurrentTemperature\":\"{{payload}}\"}\",\"output\":\"str\",\"x\":820,\"y\":1120,\"wires\":[[\"1c8b89c4.9270b6\"]]},{\"id\":\"195b33c9.57261c\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":1290,\"y\":1180,\"wires\":[]},{\"id\":\"a64825b.273ccd8\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"convert\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"data.main.temp-273.15\",\"tot\":\"jsonata\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":620,\"y\":1120,\"wires\":[[\"bf9000c2.be6a8\"]]},{\"id\":\"fcbc03d9.26567\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":410,\"y\":1140,\"wires\":[[\"a64825b.273ccd8\",\"553238c1.76cb68\"]]},{\"id\":\"9dbc96a3.21dcf8\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"topic\":\"\",\"payload\":\"\",\"payloadType\":\"date\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":200,\"y\":1080,\"wires\":[[\"2d6b39b3.dc72f6\"]]},{\"id\":\"553238c1.76cb68\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"convert\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"data.main.humidity\",\"tot\":\"jsonata\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":620,\"y\":1160,\"wires\":[[\"400e1113.e2f29\"]]},{\"id\":\"2d6b39b3.dc72f6\",\"type\":\"openweathermap\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"wtype\":\"current\",\"lon\":\"\",\"lat\":\"\",\"city\":\"Bochum\",\"country\":\"Germany\",\"language\":\"de\",\"x\":400,\"y\":1080,\"wires\":[[\"fcbc03d9.26567\"]]},{\"id\":\"66e6d0.bca8793\",\"type\":\"comment\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Klimasensoren auslesen\",\"info\":\"\",\"x\":210,\"y\":1000,\"wires\":[]},{\"id\":\"648f2c18.d730f4\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":970,\"y\":1200,\"wires\":[[\"3b22973d.547ac8\"]]},{\"id\":\"f5f3fc95.8afe2\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":820,\"y\":1200,\"wires\":[[\"648f2c18.d730f4\"]]},{\"id\":\"4a9292b6.a69abc\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"requestOptions\",\"topic\":\"\",\"payload\":\"true\",\"payloadType\":\"bool\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":640,\"y\":1200,\"wires\":[[\"f5f3fc95.8afe2\"]]},{\"id\":\"31aa55d1.30fa6a\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":970,\"y\":1080,\"wires\":[[\"cc6c7b40.da9078\"]]},{\"id\":\"d0d837e2.311f88\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":820,\"y\":1080,\"wires\":[[\"31aa55d1.30fa6a\"]]},{\"id\":\"c13c8c2f.1991c\", \"type\": \"inject\", \"z\": \"5dcffcbc.bae6c4\", \"name\": \"requestOptions\", \"topic\":\"\", \"payload\": \"true\", \"payloadType\": \"bool\", \"repeat\":\"\", \"crontab\":\"\", \"once\":false, \"onceDelay\":0.1,\"x\":640,\"y\":1080,\"wires\":[[\"d0d837e2.311f88\"]]},{\"id\":\"bd29e027.b0d63\",\"type\":\"homekit-accessory\",\"z\":\"\",\"accessoryName\":\"Temperatur\",\"pinCode\":\"111-11-111\",\"port\":\"32300\",\"manufacturer\":\"Nerdiy.de\", \"model\": \"Default Model\", \"serialNo\": \"Default Serial Number\", \"accessoryType\": \"10\"},{\"id\": \"2dc17d94.90bc32\", \"type\": \"homekit-accessory\", \"z\":\"\", \"accessoryName\": \"Humidity\", \"pinCode\": \"111-11-111\", \"port\": \"32301\", \"manufacturer\": \"Nerdiy.de\", \"model\": \"Default Model\", \"serialNo\": \"Default Serial Number\", \"accessoryType\": \"10\"}]<\/pre>\n
As with the previous examples, you also need to configure the HomeKit accessory and the service for this NodeCode. To do this, double-click on the \"Humidity\" or \"Temperature\" node. This will open the following menu again.<\/p>\n
\"\"<\/a>
To do this, select the \"HumiditySensor\" under \"Service\" and then click on the pencil icon in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
The setting procedure is the same as in the other examples. The port number must again be increased by one and set and the type is again set to \"SENSOR\".<\/figcaption><\/figure>\n
\"\"<\/a>
The same applies to \"Temperature\". The service is now set to \"TemperatureSensor\". Then click on the pencil icon again in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
...and set the properties again as in the previous examples. The type must be set to \"SENSOR\" again. The distinction between humidity and temperature sensor is made via the previously defined service.<\/figcaption><\/figure>\n
\n
Control (Tasmota) lamps<\/h2>\n
Here is an example of how you can link a lamp with the Tasmota firmware to the HomeKit node so that all changes from all sources are always transferred to all input options. This makes it possible to set the color, brightness or general on\/off setting in iOS or in the dashboard or via another way and at the same time the current status is also transmitted to all setting options.<\/p>\n
In order for this NodeCode to work for you, you also need the Sonoff node and must configure it accordingly (to match your Sonoff device).<\/p>\n
\"\"<\/a>
View of the NodeCode.<\/figcaption><\/figure>\n
[{\"id\":\"b200ae52.6003d\",\"type\":\"comment\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Tasmota RGB-LED-Steuerung\",\"info\":\"\",\"x\":220,\"y\":80,\"wires\":[]},{\"id\":\"a42e8481.c58778\",\"type\":\"ui_switch\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"label\":\"MiniLichterkette\",\"group\":\"ca676059.8e72e\",\"order\":12,\"width\":0,\"height\":0,\"passthru\":false,\"decouple\":\"true\",\"topic\":\"\",\"style\":\"\",\"onvalue\":\"true\",\"onvalueType\":\"bool\",\"onicon\":\"\",\"oncolor\":\"\",\"offvalue\":\"false\",\"offvalueType\":\"bool\",\"officon\":\"\",\"offcolor\":\"\",\"x\":820,\"y\":220,\"wires\":[[\"fd8991ee.f7fd1\"]]},{\"id\":\"73405495.f1e9cc\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"753c6646.f99048\",\"name\":\"MiniLichterkette\",\"serviceName\":\"Lightbulb\",\"x\":200,\"y\":160,\"wires\":[[\"94a1b366.5c039\",\"9b6599ac.52e878\"]]},{\"id\":\"94a1b366.5c039\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"convert\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"payload.On\",\"tot\":\"msg\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":400,\"y\":160,\"wires\":[[\"fd8991ee.f7fd1\"]]},{\"id\":\"9e961d23.1c88b\",\"type\":\"ui_colour_picker\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"label\":\"MiniLichterkette\",\"group\":\"ca676059.8e72e\",\"format\":\"hsl\",\"outformat\":\"object\",\"showSwatch\":true,\"showPicker\":true,\"showValue\":true,\"showHue\":true,\"showAlpha\":true,\"showLightness\":true,\"dynOutput\":\"false\",\"order\":25,\"width\":0,\"height\":0,\"passthru\":false,\"topic\":\"\",\"x\":200,\"y\":520,\"wires\":[[\"be8d6249.9bab5\"]]},{\"id\":\"6c5cc00.0eed54\",\"type\":\"ui_slider\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"label\":\"MiniLichterkette\",\"group\":\"ca676059.8e72e\",\"order\":0,\"width\":0,\"height\":0,\"passthru\":false,\"topic\":\"\",\"min\":0,\"max\":\"100\",\"step\":1,\"x\":200,\"y\":380,\"wires\":[[\"2dabaae2.c1e016\"]]},{\"id\":\"20784c5.660aab4\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"Brightness\":\"{{payload.l}}\",\"Hue\":\"{{payload.h}}\", \"Saturation\":\"{{payload.s}}\", \"On\": true}\",\"output\":\"str\",\"x\":580,\"y\":520,\"wires\":[[\"e8458a57.465e58\"]]},{\"id\":\"e8458a57.465e58\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":730,\"y\":520,\"wires\":[[\"73405495.f1e9cc\"]]},{\"id\":\"3bd94571.32107a\",\"type\":\"mqtt out\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Set Hue\",\"topic\":\"cmnd\/MiniLichterkette\/HsbColor1\",\"qos\":\"\",\"retain\":\"\",\"broker\":\"aa8ea139.37c07\",\"x\":800,\"y\":280,\"wires\":[]},{\"id\":\"c8c9c8e5.fccc08\",\"type\":\"mqtt out\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Set Saturation\",\"topic\":\"cmnd\/MiniLichterkette\/HsbColor2\",\"qos\":\"\",\"retain\":\"\",\"broker\":\"aa8ea139.37c07\",\"x\":820,\"y\":400,\"wires\":[]},{\"id\":\"be920697.1bc058\",\"type\":\"mqtt out\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Set Brightness\",\"topic\":\"cmnd\/MiniLichterkette\/HsbColor3\",\"qos\":\"\",\"retain\":\"\",\"broker\":\"aa8ea139.37c07\",\"x\":820,\"y\":340,\"wires\":[]},{\"id\":\"9b6599ac.52e878\",\"type\":\"function\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Split Color Values\",\"func\":\"if (msg.payload.Hue!==undefined)\n{\n    msg.payload=msg.payload.Hue;\n    return [ msg, null, null ];\n}\nif (msg.payload.Brightness!==undefined)\n{\n    msg.payload=msg.payload.Brightness;\n    return [null,  msg, null ];\n}\nif (msg.payload.Saturation!==undefined)\n{\n    msg.payload=msg.payload.Saturation;\n    return [ null, null, msg ];\n}\",\"outputs\":3,\"noerr\":0,\"x\":470,\"y\":220,\"wires\":[[\"3bd94571.32107a\"],[\"be920697.1bc058\"],[\"c8c9c8e5.fccc08\"]]},{\"id\":\"15bdce9b.ac1781\",\"type\":\"mqtt in\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"dimmerState\",\"topic\":\"stat\/MiniLichterkette\/RESULT\",\"qos\":\"2\",\"broker\":\"aa8ea139.37c07\",\"x\":190,\"y\":440,\"wires\":[[\"441ae395.5fbfcc\"]]},{\"id\":\"441ae395.5fbfcc\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":350,\"y\":440,\"wires\":[[\"5918dc5d.eee394\"]]},{\"id\":\"5918dc5d.eee394\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"payload.Dimmer\",\"tot\":\"msg\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":520,\"y\":440,\"wires\":[[\"6c5cc00.0eed54\"]]},{\"id\":\"96cbb503.343228\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":530,\"y\":380,\"wires\":[[\"73405495.f1e9cc\"]]},{\"id\":\"2dabaae2.c1e016\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"Brightness\":\"{{payload}}\"}\",\"output\":\"str\",\"x\":380,\"y\":380,\"wires\":[[\"96cbb503.343228\"]]},{\"id\":\"be8d6249.9bab5\",\"type\":\"function\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"map\",\"func\":\"msg.payload.l=msg.payload.l*100;\nmsg.payload.s=msg.payload.s*100;\n\nreturn msg;\",\"outputs\":1,\"noerr\":0,\"x\":430,\"y\":520,\"wires\":[[\"20784c5.660aab4\"]]},{\"id\":\"bf36bff2.3d98f\",\"type\":\"mqtt in\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"colorState\",\"topic\":\"stat\/MiniLichterkette\/RESULT\",\"qos\":\"2\",\"broker\":\"aa8ea139.37c07\",\"x\":180,\"y\":580,\"wires\":[[\"d85429c0.4501c8\",\"852254eb.6c9668\"]]},{\"id\":\"852254eb.6c9668\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":330,\"y\":580,\"wires\":[[\"be6203d4.c9e66\"]]},{\"id\":\"4a52a0ca.93eac\",\"type\":\"function\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"convert Color\",\"func\":\"\/\/var input=msg.payload.HSBColor;\nlet values=msg.payload.HSBColor.split(\",\");\nmsg.payload.h=values[0];\nmsg.payload.s=values[1]\/100;\nmsg.payload.l=values[2]\/100;\n\nreturn msg;\",\"outputs\":1,\"noerr\":0,\"x\":610,\"y\":580,\"wires\":[[\"9e961d23.1c88b\"]]},{\"id\":\"be6203d4.c9e66\",\"type\":\"switch\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload.HSBColor\",\"propertyType\":\"msg\",\"rules\":[{\"t\":\"nnull\"}],\"checkall\":\"true\",\"repair\":false,\"outputs\":1,\"x\":450,\"y\":580,\"wires\":[[\"db3e37fb.97a5f8\",\"4a52a0ca.93eac\"]]},{\"id\":\"fd8991ee.f7fd1\",\"type\":\"Sonoff device\",\"z\":\"5dcffcbc.bae6c4\",\"mode\":\"0\",\"broker\":\"665cb0c4.3e438\",\"device\":\"MiniLichterkette\",\"name\":\"\",\"onValue\":\"ON\",\"offValue\":\"OFF\",\"cmdPrefix\":\"cmnd\",\"statPrefix\":\"stat\",\"telePrefix\":\"tele\",\"x\":810,\"y\":160,\"wires\":[[\"a42e8481.c58778\"]]},{\"id\":\"b3771bf1.2acd78\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":550,\"y\":120,\"wires\":[[\"73405495.f1e9cc\"]]},{\"id\":\"5dbdb6ee.9ac9f8\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":400,\"y\":120,\"wires\":[[\"b3771bf1.2acd78\"]]},{\"id\":\"97278e2f.5d65a\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"requestOptions\",\"topic\":\"\",\"payload\":\"true\",\"payloadType\":\"bool\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":200,\"y\":120,\"wires\":[[\"5dbdb6ee.9ac9f8\"]]},{\"id\":\"d85429c0.4501c8\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":350,\"y\":640,\"wires\":[]},{\"id\":\"db3e37fb.97a5f8\",\"type\":\"debug\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"active\":true,\"tosidebar\":true,\"console\":false,\"tostatus\":false,\"complete\":\"true\",\"x\":590,\"y\":640,\"wires\":[]},{\"id\":\"ca676059.8e72e\",\"type\":\"ui_group\",\"z\":\"\",\"name\":\"Mini-Lichterkette\",\"tab\":\"d651a8eb.fefb38\",\"disp\":true,\"width\":\"6\",\"collapse\":false},{\"id\":\"753c6646.f99048\",\"type\":\"homekit-accessory\",\"z\":\"\",\"accessoryName\":\"Lampen\",\"pinCode\":\"111-11-111\",\"port\":\"32302\",\"manufacturer\":\"Nerdiy.de\",\"model\":\"Default Model\",\"serialNo\":\"Default Serial Number\",\"accessoryType\":\"5\"},{\"id\":\"aa8ea139.37c07\",\"type\":\"mqtt-broker\",\"z\":\"\",\"name\":\"Server-Mqtt\",\"broker\":\"server.fritz.box\",\"port\":\"1883\",\"clientid\":\"\",\"usetls\":false,\"compatmode\":true,\"keepalive\":\"60\",\"cleansession\":true,\"birthTopic\":\"\",\"birthQos\":\"0\",\"birthPayload\":\"\",\"closeTopic\":\"\",\"closeQos\":\"0\",\"closePayload\":\"\",\"willTopic\":\"\",\"willQos\":\"0\",\"willPayload\":\"\"},{\"id\":\"665cb0c4.3e438\",\"type\":\"mqtt-broker\",\"z\":\"\",\"name\":\"\",\"broker\":\"server.fritz.box\",\"port\":\"1883\",\"clientid\":\"\",\"usetls\":false,\"compatmode\":true,\"keepalive\":\"60\",\"cleansession\":true,\"birthTopic\":\"\",\"birthQos\":\"0\",\"birthPayload\":\"\",\"closeTopic\":\"\",\"closeQos\":\"0\",\"closePayload\":\"\",\"willTopic\":\"\",\"willQos\":\"0\",\"willPayload\":\"\"},{\"id\":\"d651a8eb.fefb38\",\"type\":\"ui_tab\",\"z\":\"\",\"name\":\"Home\",\"icon\":\"dashboard\"}]<\/pre>\n
As with the previous examples, you also need to configure the HomeKit accessory and the service for this NodeCode. To do this, double-click on the node (in this case) \"Mini light chain\". This will open the following menu again.<\/p>\n
\"\"<\/a>
There you first set the service to \"Lightbulb\" and then click on the pen icon in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
The settings here are the same as in the previous examples. Only the type is set to \"LIGHTBULB\" and of course the port number must be adjusted again.<\/figcaption><\/figure>\n
\n
Control sockets<\/h2>\n
This example shows you how you can simulate a SmartHome socket with the HomeKit node. A SonoffS26 socket is used here which (like the lamp in the previous example) is \"equipped\" with the Tasmota firmware. How to program such a socket with the Tasmota firmware and control it via Node-Red is described in the article Tasmota \u2013 Flash Sonoff S26 socket with Tasmota firmware<\/strong><\/em><\/a>\u00a0<\/span>described.<\/p>\n
As with all other examples, there is also an Inject node with the name \"requestOptions\". If you click on it, all the properties of this HomeKit device are displayed in the debug bar.<\/p>\n
\"\"<\/a>
View of the NodeCode.<\/figcaption><\/figure>\n
[{\"id\":\"d6d0d8e6.785448\",\"type\":\"comment\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"Steckdose\",\"info\":\"\",\"x\":180,\"y\":1800,\"wires\":[]},{\"id\":\"bad38f27.a93b4\",\"type\":\"ui_switch\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"label\":\"Steckdose\",\"group\":\"16663fb4.9e351\", \"order\":20, \"width\":0, \"height\":0, \"passthru\":false, \"decouple\": \"true\", \"topic\":\"\", \"style\":\"\", \"onvalue\": \"true\", \"onvalueType\":\"bool\",\"onicon\":\"\",\"oncolor\":\"\",\"offvalue\":\"false\",\"offvalueType\":\"bool\",\"officon\":\"\",\"offcolor\":\"\",\"x\":670,\"y\":1920,\"wires\":[[\"f1118c1c.95804\"]]},{\"id\":\"f1118c1c.95804\",\"type\":\"Sonoff device\",\"z\":\"5dcffcbc.bae6c4\",\"mode\":\"0\",\"broker\":\"1fafbb1c.a2df75\",\"device\":\"SonoffS26\",\"name\":\"\",\"onValue\":\"ON\",\"offValue\":\"OFF\",\"cmdPrefix\":\"cmnd\",\"statPrefix\":\"stat\",\"telePrefix\":\"tele\",\"x\":660,\"y\":1860,\"wires\":[[\"bad38f27.a93b4\"]]},{\"id\":\"a4cdda.44b67228\",\"type\":\"homekit-service\",\"z\":\"5dcffcbc.bae6c4\",\"accessory\":\"b7e7d023.40f38\",\"name\":\"Steckdose\",\"serviceName\":\"Outlet\",\"x\":250,\"y\":1860,\"wires\":[[\"307b902a.ca26b\"]]},{\"id\":\"307b902a.ca26b\",\"type\":\"change\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"convert\",\"rules\":[{\"t\":\"set\",\"p\":\"payload\",\"pt\":\"msg\",\"to\":\"payload.On\",\"tot\":\"msg\"}],\"action\":\"\",\"property\":\"\",\"from\":\"\",\"to\":\"\",\"reg\":false,\"x\":440,\"y\":1860,\"wires\":[[\"f1118c1c.95804\"]]},{\"id\":\"fb3c28d1.cb8da8\",\"type\":\"json\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"\",\"property\":\"payload\",\"action\":\"\",\"pretty\":false,\"x\":570,\"y\":1980,\"wires\":[[\"a4cdda.44b67228\"]]},{\"id\":\"811d7998.a861e8\",\"type\":\"template\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"options\",\"field\":\"payload\",\"fieldType\":\"msg\",\"format\":\"handlebars\",\"syntax\":\"mustache\",\"template\":\"{\"foo\":\"bar\"}\",\"output\":\"str\",\"x\":420,\"y\":1980,\"wires\":[[\"fb3c28d1.cb8da8\"]]},{\"id\":\"6bdad444.d1270c\",\"type\":\"inject\",\"z\":\"5dcffcbc.bae6c4\",\"name\":\"requestOptions\",\"topic\":\"\",\"payload\":\"true\",\"payloadType\":\"bool\",\"repeat\":\"\",\"crontab\":\"\",\"once\":false,\"onceDelay\":0.1,\"x\":260,\"y\":1980,\"wires\":[[\"811d7998.a861e8\"]]},{\"id\":\"16663fb4.9e351\",\"type\":\"ui_group\",\"z\":\"\",\"name\":\"Licht\",\"tab\":\"e5c99d4.147226\",\"order\":2,\"disp\":true,\"width\":\"6\",\"collapse\":false},{\"id\":\"1fafbb1c.a2df75\", \"type\": \"mqtt-broker\", \"z\":\"\", \"name\": \"Server-Mqtt\", \"broker\": \"server.fritz.box\", \"port\": \"1883\", \"clientid\":\"\", \"usetls\":false, \"compatmode\":true, \"keepalive\": \"60\", \"cleansession\":true, \"birthTopic\":\"\", \"birthQos\":\"0\",\"birthPayload\":\"\",\"closeTopic\":\"\",\"closeQos\":\"0\",\"closePayload\":\"\",\"willTopic\":\"\",\"willQos\":\"0\",\"willPayload\":\"\"},{\"id\":\"b7e7d023.40f38\",\"type\":\"homekit-accessory\",\"z\":\"\",\"accessoryName\":\"Steckdosen\",\"pinCode\":\"111-11-111\",\"port\":\"32303\",\"manufacturer\":\"Nerdiy.de\",\"model\":\"Default Model\",\"serialNo\":\"Default Serial Number\",\"accessoryType\":\"7\"},{\"id\":\"e5c99d4.147226\",\"type\":\"ui_tab\",\"z\":\"\",\"name\":\"Home\",\"icon\":\"dashboard\",\"order\":1}]<\/pre>\n
Here too (surprise \ud83d\ude42 ) - as with the previous examples - you need to configure the HomeKit accessory and the service. To do this, double-click on the \"Socket\" node. This will open the following menu again.<\/p>\n
\"\"<\/a>
There you first set the service to \"Outlet\" and then click on the pencil icon in the \"Accessory\" section.<\/figcaption><\/figure>\n
\"\"<\/a>
The settings here are the same as in the previous examples. Only the type is set to \"OUTLET\" and of course the port number must be adjusted again.<\/figcaption><\/figure>\n
\n
Find out the setting options and properties of the devices<\/h2>\n
Some examples have an Inject node with the name \"requestOptions\". You can use this to display the available properties of the respective HomeKit node. You can then use these properties to set the simulated HomeKit device. For example, the HomeKit node that controls the \"mini fairy lights\" has the option of setting the ColorTermperature. If you set the property, the corresponding value is displayed in HomeKit.<\/p>\n
\"\"<\/a>
Overview of the properties of the HomeKit nodes used in these examples.<\/figcaption><\/figure>\n
\n
Setup on the iPhone<\/h2>\n
Once you have created your desired HomeKit devices in NodeRed, it is now time to register them on the iOS device. In this section you will be guided (somewhat) step by step through the registration process. As this sometimes involves a lot of pictures, the following steps are summarized as slide shows.<\/p>\n
\"\"<\/a>
To do this, open the \"Home\" app on your iOS device (in this case an iPhone).<\/figcaption><\/figure>\n
\"\"<\/a>
In the \"factory settings\", no HomeKit devices are registered here yet. This is why you will see the \"Add Accessory\" button at the bottom. Clicking on it will take you to the menu where you can add new HomeKit devices.<\/figcaption><\/figure>\n
Air humidity<\/h3>\n
To start the registration of a humidity sensor, click on \"Add Accessory\" as indicated in the previous step.<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
Heating thermostats<\/h3>\n
To start the registration of the heating thermostat, click on \"Add Accessory\" - as in the previous step - and then on \"Don't Have a Code or Can't Scan\".<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
(Tasmota) lamp<\/h3>\n
To start the registration of the lamp, click on \"Add Accessory\" - as in the previous step - and then on \"Don't Have a Code or Can't Scan\".<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
(Tasmota) socket<\/h3>\n
To start the registration of the socket, click on \"Add Accessory\" - as in the previous step - and then on \"Don't Have a Code or Can't Scan\".<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
Temperature sensor<\/h3>\n
To start the registration of the temperature sensor, click on \"Add Accessory\" - as in the previous step - and then on \"Don't Have a Code or Can't Scan\".<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
Motion detector<\/h3>\n
To start the registration of the motion detector, click on \"Add Accessory\" - as in the previous step - and then on \"Don't Have a Code or Can't Scan\".<\/p>\n
This slideshow requires JavaScript.<\/p>
<\/div>\n
\n
You may have already noticed: With this iOs Node you have all kinds of possibilities. Just try it out a bit. If you have any questions, please leave them in the comments.<\/p>\n
Have fun with the project<\/h2>\r\n
I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n
PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
You can swear about Apple devices or idolize them, but what Apple has done very well is to integrate SmartHome components into their operating systems. Thus, iOs inherently brings a [...]<\/p>","protected":false},"author":1,"featured_media":3327,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[123,113,24,61,148,120],"tags":[137,33,138,114,25,47,48,229,51],"class_list":["post-3027","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-apple","category-node-red","category-raspberry-pi","category-smarthome","category-tagesprojekt5h","category-tasmota","tag-apple","tag-automatisierung","tag-iphone","tag-nodered","tag-raspberrypi","tag-raspi","tag-raspian","tag-smart","tag-smarthome"],"yoast_head":"\nHowTo: Node Red - Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/control-nodered-devices-with-apple-homekit-and-read-sensors-2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Node Red - Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/control-nodered-devices-with-apple-homekit-and-read-sensors-2\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-02-28T17:26:13+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-12-18T16:39:03+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093-576x1024.png\" \/>\n\t<meta property=\"og:image:width\" content=\"576\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"23 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Node Red – Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen\",\"datePublished\":\"2019-02-28T17:26:13+00:00\",\"dateModified\":\"2021-12-18T16:39:03+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/\"},\"wordCount\":2002,\"commentCount\":4,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1\",\"keywords\":[\"Apple\",\"Automatisierung\",\"iPhone\",\"NodeRed\",\"Raspberry Pi\",\"RasPi\",\"Raspian\",\"Smart\",\"SmartHome\"],\"articleSection\":[\"Apple\",\"Node Red\",\"Raspberry Pi\",\"SmartHome\",\"Tagesprojekt(<5h)\",\"Tasmota\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/\",\"name\":\"HowTo: Node Red - Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1\",\"datePublished\":\"2019-02-28T17:26:13+00:00\",\"dateModified\":\"2021-12-18T16:39:03+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1\",\"width\":1242,\"height\":2208,\"caption\":\"... both on the homepage ... ------ ...sowohl auf der Startseite...\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Node Red – Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Node Red - Control devices with Apple HomeKit and read sensors - nerdiy.de - DIY, electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/control-nodered-devices-with-apple-homekit-and-read-sensors-2\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: Node Red - Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/control-nodered-devices-with-apple-homekit-and-read-sensors-2\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2019-02-28T17:26:13+00:00","article_modified_time":"2021-12-18T16:39:03+00:00","og_image":[{"width":576,"height":1024,"url":"https:\/\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093-576x1024.png","type":"image\/png"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"23 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Node Red – Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen","datePublished":"2019-02-28T17:26:13+00:00","dateModified":"2021-12-18T16:39:03+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/"},"wordCount":2002,"commentCount":4,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1","keywords":["Apple","Automatisierung","iPhone","NodeRed","Raspberry Pi","RasPi","Raspian","Smart","SmartHome"],"articleSection":["Apple","Node Red","Raspberry Pi","SmartHome","Tagesprojekt(<5h)","Tasmota"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/","url":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/","name":"HowTo: Node Red - Control devices with Apple HomeKit and read sensors - nerdiy.de - DIY, electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1","datePublished":"2019-02-28T17:26:13+00:00","dateModified":"2021-12-18T16:39:03+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1","width":1242,"height":2208,"caption":"... both on the homepage ... ------ ...sowohl auf der Startseite..."},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/de_de\/nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Node Red – Ger\u00e4te mit Apple HomeKit steuern und Sensoren auslesen"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-nodered-geraete-mit-apple-homekit-steuern-und-sensoren-auslesen-img-0093.png?fit=1242%2C2208&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-MP","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":17408,"url":"https:\/\/nerdiy.de\/en\/integrate-howto-zigbee-tuya-room-temperature-and-humidity-sensor-ts0201-into-node-red-via-zigbee2mqtt-2\/","url_meta":{"origin":3027,"position":0},"title":"HowTo: Zigbee - Integrate TuYa room temperature and humidity sensor TS0201 into Node Red via zigbee2mqtt","author":"Fab","date":"10. January 2022","format":false,"excerpt":"\u00dcber den TuYa TS0201 Temperatur und Luftfeuchtigkeitssensor bin ich auf der Suche nach eine einfachen Luftfeuchtigkeitssensor gestolptert. Eigentlich war ich n\u00e4mlich auf der Suche nach einem simplen Luftfeuchtigkeitssensor mit Display um die Luftfeuchtigkeit im Keller anzeigen zu k\u00f6nnen. Der Hintergrund war, dass ich so sicherstellen wollte, dass die eingelagerten Kartons,\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-tuya-raumtemperatur-sensor-ts0201-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04621-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-tuya-raumtemperatur-sensor-ts0201-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04621-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-tuya-raumtemperatur-sensor-ts0201-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04621-scaled.jpg?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-tuya-raumtemperatur-sensor-ts0201-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04621-scaled.jpg?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-tuya-raumtemperatur-sensor-ts0201-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04621-scaled.jpg?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17601,"url":"https:\/\/nerdiy.de\/en\/howto-integrate-zigbee-ikea-fyrtur-roller-blind-e1757-via-zigbee2mqtt-in-node-red\/","url_meta":{"origin":3027,"position":1},"title":"HowTo: Integrate Zigbee \u2013 IKEA FYRTUR roller blind E1757 into Node Red via zigbee2mqtt","author":"Fab","date":"21. February 2023","format":false,"excerpt":"Das IKEA FYRTUR Rollo ist eine sehr einfache M\u00f6glichkeit, wie Ihr Eure Fenster mit einem leicht steuerbaren Rollo nachzur\u00fcsten. Dank Zigbee Anbindung k\u00f6nnt Ihr dies dann f\u00fcr alle M\u00f6glichen Szenerien nutzen. So l\u00e4sst sich zum Beispiel sehr leicht eine automatische \u00d6ffnung bei Sonnenaufgang oder auch ein automatisches Schlie\u00dfen sobald im\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/02\/www.nerdiy.de-howto-zigbee-ikea-fyrtur-rollo-e1757-ueber-zigbee2mqtt-in-node-red-einbinden-20220201-190346.jpg?fit=900%2C1200&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":17406,"url":"https:\/\/nerdiy.de\/en\/integrate-howto-zigbee-xiaomi-aqara-mccgq11lm-door-or-window-sensor-via-zigbee2mqtt-in-nodered\/","url_meta":{"origin":3027,"position":2},"title":"HowTo: Zigbee - Integrate Xiaomi Aqara MCCGQ11LM door\/window sensor into NodeRed via zigbee2mqtt","author":"Fab","date":"17. January 2022","format":false,"excerpt":"In dem Artikel zum Sonoff SNZB-03 Bewegungsmelder und Ikea TRADFRI Bewegungsmelder Bewegungsmelder hatte ich schonmal erw\u00e4hnt, dass sich ein Smart Home auch zu einer (eingeschr\u00e4nkten) Alarmanlage ausbauen l\u00e4sst. Dabei k\u00f6nnen die Bewegungsmelder den Innenraum \u00fcberwachen und bescheid geben, wenn in der Wohnung\/Haus Bewegungen erkannt wurden obwohl niemand zuhause ist. Eine\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-xiaomi-aqara-mccgq11lm-tuer-bzw-fenstersensor-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04606-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-xiaomi-aqara-mccgq11lm-tuer-bzw-fenstersensor-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04606-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-xiaomi-aqara-mccgq11lm-tuer-bzw-fenstersensor-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04606-scaled.jpg?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-xiaomi-aqara-mccgq11lm-tuer-bzw-fenstersensor-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04606-scaled.jpg?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-xiaomi-aqara-mccgq11lm-tuer-bzw-fenstersensor-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04606-scaled.jpg?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17450,"url":"https:\/\/nerdiy.de\/en\/howto-zigbee-ikea-styrbar-button-e2001-e2002-via-zigbee2mqtt-in-nodered-integrate-2\/","url_meta":{"origin":3027,"position":3},"title":"HowTo: Zigbee - IKEA STYRBAR push button E2001\/E2002 via zigbee2mqtt into NodeRed","author":"Fab","date":"19. January 2022","format":false,"excerpt":"Der IKEA STYRBAR Taster ist etwas gr\u00f6\u00dfer als der kleine Bruder der Ikea TRADFRI E1743 Taster. Daf\u00fcr bietet er aber auch ein paar mehr Funktion und - aufgrund der zwei eingesetzten AA Batterien - eine l\u00e4ngere Batterielebensdauer. Neben den einfachen Ein- und Aus-Tasten (bei denen auch lange Tastendr\u00fccke ausgewertet werden)\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2021\/12\/www.nerdiy.de-howto-zigbee-ikea-styrbar-taster-e2001e2002-ueber-zigbee2mqtt-in-nodered-einbinden-dsc04573-scaled.jpg?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17447,"url":"https:\/\/nerdiy.de\/en\/integrate-howto-zigbee-ikea-tradfri-motion-detector-e1525-e1745-via-zigbee2mqtt-into-node-red-2-2\/","url_meta":{"origin":3027,"position":4},"title":"HowTo: Zigbee - Integrate Ikea TRADFRI motion detector E1525\/E1745 via zigbee2mqtt in Node Red","author":"Fab","date":"14. January 2022","format":false,"excerpt":"Im Artikel \u00fcber den Sonoff SNZB-03 Bewegungsmelder hatte ich schonmal beschrieben wie man einen Bewegungsmelder nutzen kann um das eigene SmartHome weiter zu automatisieren. So lassen sich nicht nur Lichter automatisch ein- bzw. ausschalten. Auch eine (einfache) Alarmanlage l\u00e4sst sich so realisieren. Eine weitere Alternative zu dem Sonoff SNZB-03 Bewegungsmelder\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-bewegungsmelder-e1525e1745-ueber-zigbee2mqtt-in-node-red-einbinden-20220113-192530.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-bewegungsmelder-e1525e1745-ueber-zigbee2mqtt-in-node-red-einbinden-20220113-192530.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-bewegungsmelder-e1525e1745-ueber-zigbee2mqtt-in-node-red-einbinden-20220113-192530.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-bewegungsmelder-e1525e1745-ueber-zigbee2mqtt-in-node-red-einbinden-20220113-192530.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-bewegungsmelder-e1525e1745-ueber-zigbee2mqtt-in-node-red-einbinden-20220113-192530.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17597,"url":"https:\/\/nerdiy.de\/en\/integrate-howto-zigbee-ikea-tradfri-shortcut-button-e1812-via-zigbee2mqtt-in-node-red\/","url_meta":{"origin":3027,"position":5},"title":"HowTo: Zigbee - IKEA TRADFRI shortcut button E1812 via zigbee2mqtt into Node Red","author":"Fab","date":"11. January 2022","format":false,"excerpt":"Der IKEA TRADFRI Shortcut Taster E1812 ist der kleine Bruder des Ikea TRADFRI E1743 Taster. Beide sind in der Gr\u00f6\u00dfe Identisch. Die Einzigen Unterschiede beim Shortcut Taster sind, dass dieser nur \u00fcber eine Schaltfl\u00e4che (anstatt zwei) verf\u00fcgt und die Tastfl\u00e4che selber gestaltet werden kann. Dazu sind im Lieferumfang des Tasters\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-shortcut-taster-e1812-ueber-zigbee2mqtt-in-nodered-einbinden-dsc06169-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-shortcut-taster-e1812-ueber-zigbee2mqtt-in-nodered-einbinden-dsc06169-scaled.jpg?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-shortcut-taster-e1812-ueber-zigbee2mqtt-in-nodered-einbinden-dsc06169-scaled.jpg?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-shortcut-taster-e1812-ueber-zigbee2mqtt-in-nodered-einbinden-dsc06169-scaled.jpg?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-zigbee-ikea-tradfri-shortcut-taster-e1812-ueber-zigbee2mqtt-in-nodered-einbinden-dsc06169-scaled.jpg?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/3027","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=3027"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/3027\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/3327"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=3027"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=3027"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=3027"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}