{"id":8267,"date":"2020-10-30T16:32:10","date_gmt":"2020-10-30T15:32:10","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=8267"},"modified":"2020-10-30T16:32:22","modified_gmt":"2020-10-30T15:32:22","slug":"howto-tasmota-set-a-drop-delayed-after-running-of-a-relay-2","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay-2\/","title":{"rendered":"HowTo: Tasmota \u2013 Set off-delayed after-running of a relay"},"content":{"rendered":"

The overrun of a relay is actually a quite often used function. Unfortunately, this is (at least until today) not so easy to realize with the Tasmota relays.<\/p>\n\n\n\n

A practical application for an overrun relay is, for example, a bathroom fan.
A bathroom fan is often coupled with the bathroom light switch. So when the bathroom light is on, the bathroom fan runs as well.
This is practical but has the disadvantage that, for example, after showering, the humid air is extracted only when the light is on.<\/p>\n\n\n\n

An overrun relay is helpful here. This waits after switching off (the light and thus also the fan relay) for a certain time before the relay then also switches off the connected actuator (here the fan).<\/p>\n\n\n\n

How you can activate this function on a Tasmota device with a trick is explained in the following article.<\/p>\n\n\n\n

\n\n\n

Safety instructions <\/span><\/h2>\r\n

I know the following notes are always kind of annoying and seem unnecessary. Unfortunately, many people who knew "better" have lost eyes, fingers or other things due to carelessness or injured themselves. Data loss is almost negligible in comparison, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Because even the coolest project is not worth injury or other trouble.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links\/advertising links<\/h2>\r\n

The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and make a purchase via this link, Nerdiy.de will receive a commission from the relevant online shop or provider. The price does not change for you. If you make your purchases via these links, you support Nerdiy.de in being able to offer other useful projects in the future. \ud83d\ude42\u00a0<\/em><\/p>\n\n\n\n

\n\n\n\n

Requirements<\/h2>\n\n\n\n

Helpful articles:
<\/strong>Before you can use this function, you should have installed your Tasmota device and configured it so that you can access it via your wifi. How to do this is described in the following articles.<\/p>\n\n\n\n

Tasmota \u2013 flash firmware<\/a><\/em><\/strong><\/p>\n\n\n\n

Required tool:<\/strong>
- none<\/p>\n\n\n\n

Required material:<\/strong><\/p>\n\n\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n\n\n\n
\n\n\n\n

The mode of operation<\/h2>\n\n\n\n

Unfortunately there is no \"one\" command in Tasmota with which you can realize a run-on time. <\/p>\n\n\n\n

However, there is the possibility to define own rules in the Tasmota firmware. With its help different behaviors and also a run-on time can be defined. In the following an explanation of a possible solution.<\/p>\n\n\n\n

First, we use the rules to define that the Tasmota relay listens for messages on a specific MQTT topic. As soon as a command to switch off the relay is received, the relay is not switched off directly. Instead, a timer is started. Only after this timer has expired, the relay is switched off. <\/p>\n\n\n\n

If a command to switch on the relay is received while the timer is running, the timer will be deactivated and the relay will remain switched on.<\/p>\n\n\n\n

The following section describes the behavior as a rule.<\/p>\n\n\n\n

\n\n\n\n

The required rule<\/h2>\n\n\n\n

Below you can see the rules that are needed. <\/p>\n\n\n\n

Rule 1: <\/strong>Subscribe to the MQTT topic \"cmnd\/3dswitch\" as soon as the relay is connected to your MQTT server. Of course you can also choose another topic here.<\/p>\n\n\n\n

Rule 2:<\/strong> Activates the relay and resets the timer when it receives a \"1\" on the subscribed topic.<\/p>\n\n\n\n

Rule 3:<\/strong> Starts the timer to switch off the relay as soon as a \"0\" is received on the subscribed topic.<\/p>\n\n\n\n

Rule 4:<\/strong> Deactivates the relay as soon as the previously set timer has expired. The set value \"120\" corresponds to a run-on time of 120 seconds. If you want a different overrun time, you can adjust this value accordingly. <\/p>\n\n\n\n

on Mqtt#Connected do Subscribe 3dswitch, cmnd\/3dswitch endon on Event#3dswitch=1 do backlog power1 on; ruletimer1 0 endon on Event#3dswitch=0 do ruletimer1 120 endon on rules#timer=1 do power1 0 endon<\/code><\/pre>\n\n\n\n
To apply this Tasmota configuration to your Tasmota relay, you must now execute the following commands in the console of your Tasmota relay.<\/p>\n\n\n\n
backlog switchmode1 1; rule1 1<\/code><\/pre>\n\n\n\n
and<\/p>\n\n\n\n
rule1 on Mqtt#Connected do Subscribe 3dswitch, cmnd\/3dswitch endon on Event#3dswitch=1 do backlog power1 on; ruletimer1 0 endon on Event#3dswitch=0 do ruletimer1 120 endon on rules#timer=1 do power1 0 endon<\/code><\/pre>\n\n\n\n
\n\n\n\n
Enable function to subscribe to MQTT topics<\/h2>\n\n\n\n
A small problem is unfortunately that subscribing to MQTT topics is not supported by the pre-compiled binaries of the Tasmota firmware. This has to be enabled separately and then programmed on your Tasmota relay.<\/p>\n\n\n\n
For this you have to download the firmware from the Tasmota GIT repository. <\/p>\n\n\n\n
You can find the repository here: https:\/\/github.com\/arendst\/Tasmota<\/a><\/em><\/strong><\/p>\n\n\n\n
How to download files from a Git repository is described in the article GitHub - How do I copy files from a Git repository to my computer?  <\/a><\/em><\/strong><\/p>\n\n\n\n
Once you have downloaded the files you should open the source code in the Arduino IDE. Then change to the file \"my_user_config.h and\/or search directly for the value \"SUPPORT_MQTT_EVENT\".<\/p>\n\n\n\n
\"\"<\/a>
Here you can see the relevant post. To enable subscribing to MQTT topics, you need to...<\/figcaption><\/figure>\n\n\n\n
\"\"<\/a>
...activate this part (as shown in the picture) by removing the comment by the two \"\/\/\".<\/figcaption><\/figure>\n\n\n\n
After that you have to program the firmware to your Tasmota relay.<\/p>\n\n\n\n
You can also find more information here: https:\/\/tasmota.github.io\/docs\/Subscribe-%26-Unsubscribe\/<\/a><\/em><\/strong><\/p>\n\n\n\n
\n\n\n\n
Switching the relay on and off<\/h2>\n\n\n\n
Not much actually changes to turn the now prepared relay on and off. <\/p>\n\n\n\n
To turn it on you just have to send a \"1\" to the topic \"cmnd\/3dswitch\" (or the one you configured).<\/p>\n\n\n\n
To switch off you have to send a \"0\" to the configured topic. After the set delay time the relay should switch off. <\/p>\n\n\n\n
\n\n\n
Have fun with the project<\/h2>\r\n
I hope everything worked as described for you. If not or you have questions or suggestions please let me know in the comments. I will then add this to the article if necessary.
Ideas for new projects are always welcome. \ud83d\ude42<\/p>\r\n
PS Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you think it's cool that I share the information with you, I would be happy about a small donation to the coffee fund. \ud83d\ude42<\/strong><\/p>\r\n
\"Buy<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
The overrun of a relay is actually a quite often used function. Unfortunately, this is (at least until today) not so easy to realize with the Tasmota relays. A practical use case [...]<\/p>","protected":false},"author":1,"featured_media":12238,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[149,86,61,120],"tags":[33,231,51,131],"class_list":["post-8267","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abendprojekt2h","category-elektronik","category-smarthome","category-tasmota","tag-automatisierung","tag-relais","tag-smarthome","tag-tasmota"],"yoast_head":"\nHowTo: Tasmota - Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Tasmota - Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2020-10-30T15:32:10+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-10-30T15:32:22+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"905\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Tasmota – Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen\",\"datePublished\":\"2020-10-30T15:32:10+00:00\",\"dateModified\":\"2020-10-30T15:32:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/\"},\"wordCount\":711,\"commentCount\":3,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/10\\\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1\",\"keywords\":[\"Automatisierung\",\"relais\",\"SmartHome\",\"Tasmota\"],\"articleSection\":[\"Abendprojekt(<2h)\",\"Elektronik\",\"SmartHome\",\"Tasmota\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/\",\"name\":\"HowTo: Tasmota - Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/10\\\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1\",\"datePublished\":\"2020-10-30T15:32:10+00:00\",\"dateModified\":\"2020-10-30T15:32:22+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/10\\\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/10\\\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1\",\"width\":1920,\"height\":905},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/en\\\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Tasmota – Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Tasmota - Setting the drop-out delay of a relay - nerdiy.de - DIY, electronics, 3D printing and more...","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/","og_locale":"en_US","og_type":"article","og_title":"HowTo: Tasmota - Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2020-10-30T15:32:10+00:00","article_modified_time":"2020-10-30T15:32:22+00:00","og_image":[{"width":1920,"height":905,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","type":"image\/png"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Tasmota – Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen","datePublished":"2020-10-30T15:32:10+00:00","dateModified":"2020-10-30T15:32:22+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/"},"wordCount":711,"commentCount":3,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","keywords":["Automatisierung","relais","SmartHome","Tasmota"],"articleSection":["Abendprojekt(<2h)","Elektronik","SmartHome","Tasmota"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/","url":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/","name":"HowTo: Tasmota - Setting the drop-out delay of a relay - nerdiy.de - DIY, electronics, 3D printing and more...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","datePublished":"2020-10-30T15:32:10+00:00","dateModified":"2020-10-30T15:32:22+00:00","description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","width":1920,"height":905},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/en\/howto-tasmota-set-a-drop-delayed-after-running-of-a-relay\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Tasmota – Abfallverz\u00f6gertes Nachlaufen eines Relais einstellen"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, electronics, 3D printing and more...","description":"At nerdiy.de, everything revolves around electronics, DIY, 3D printing, smart home and many other technical topics.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/10\/www.nerdiy.de-howto-tasmota-abfallverzoegertes-nachlaufen-eines-relais-einstellen-javaw-zueijwugpk.png?fit=1920%2C905&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-29l","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":1973,"url":"https:\/\/nerdiy.de\/en\/set-tasmota-after-running-of-a-relay-2\/","url_meta":{"origin":8267,"position":0},"title":"HowTo: Tasmota - Configure automatic output shutdown","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Automatisch abfallende Relais kennt man zum Beispiel aus dem Treppenhaus. Durch dr\u00fccken eines Tasters wird das Licht eingeschaltet. Ohne, dass der Taster erneut gedr\u00fcckt werden muss wird das Licht automatisch nach einer gewissen Zeit wieder ausgeschaltet. Wie Ihr diese Funktion bei einem Tasmota-Ger\u00e4t aktivieren und nutzen k\u00f6nnt ist im folgenden\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-firmware-mit-tuyaconvert-flashen-firefox-5y61jtcej7-1.png?fit=972%2C718&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-firmware-mit-tuyaconvert-flashen-firefox-5y61jtcej7-1.png?fit=972%2C718&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-firmware-mit-tuyaconvert-flashen-firefox-5y61jtcej7-1.png?fit=972%2C718&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/11\/www.nerdiy.de-howto-tasmota-firmware-mit-tuyaconvert-flashen-firefox-5y61jtcej7-1.png?fit=972%2C718&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":17926,"url":"https:\/\/nerdiy.de\/en\/howto-tasmota-socket-with-switch-on-delay-switch-on-delayed-2\/","url_meta":{"origin":8267,"position":1},"title":"HowTo: Tasmota - Switch on socket delayed with switch on delay","author":"Fab","date":"25. January 2022","format":false,"excerpt":"Um ganz Sicher zu gehen, dass ich nach dem Verlassen meines Arbeitsplatzes\/Schreibtisch auch wirklich alle Ger\u00e4te (L\u00f6tkolben, etc.) ausgeschaltet habe, schalte ich schon seit Jahren die Verbraucher an meinem Schreibtisch \u00fcber eine zentrale Steckdose. Leider hat sich mit der Zeit daraus ein nerviges Problem entwickelt. Denn an dieser zentralen Steckdose\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-tasmota-steckdose-verzoegert-einschalten-chrome-trohrtzyhg.jpg?fit=999%2C657&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-tasmota-steckdose-verzoegert-einschalten-chrome-trohrtzyhg.jpg?fit=999%2C657&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-tasmota-steckdose-verzoegert-einschalten-chrome-trohrtzyhg.jpg?fit=999%2C657&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2022\/01\/www.nerdiy.de-howto-tasmota-steckdose-verzoegert-einschalten-chrome-trohrtzyhg.jpg?fit=999%2C657&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":4511,"url":"https:\/\/nerdiy.de\/en\/tasmota-firmware-flash\/","url_meta":{"origin":8267,"position":2},"title":"HowTo: Tasmota \u2013 flash firmware","author":"Fab","date":"7. March 2019","format":false,"excerpt":"Neben der Hardware ist die richtige Software f\u00fcr Euer Projekt nat\u00fcrlich genauso wichtig. Eine praktische und universell einsetzbare Firmware f\u00fcr den Wald-und-Wiesen-Mikrocontroller ESP8266 ist die Tasmota Firmware. Damit lassen sich diverse Projekte realisieren ohne, dass Ihr selber programmieren m\u00fcsst. Au\u00dferdem muss man das Rad ja auch nicht jedes mal \"neu\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-tasmota-firmware-flashen-javaw-2019-02-25-20-41-40.png?fit=1200%2C684&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-tasmota-firmware-flashen-javaw-2019-02-25-20-41-40.png?fit=1200%2C684&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-tasmota-firmware-flashen-javaw-2019-02-25-20-41-40.png?fit=1200%2C684&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-tasmota-firmware-flashen-javaw-2019-02-25-20-41-40.png?fit=1200%2C684&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-tasmota-firmware-flashen-javaw-2019-02-25-20-41-40.png?fit=1200%2C684&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2456,"url":"https:\/\/nerdiy.de\/en\/nodered-tasmota-a-dead-man-switch-or-how-to-use-no-status-messages-as-an-event\/","url_meta":{"origin":8267,"position":3},"title":"HowTo: Node Red \/ Tasmota - A "dead man's switch" or how to use the absence of status messages as an event","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ich muss zugeben ich hab sie noch nie gesehen, aber es soll in Z\u00fcgen so genannte Tot-Mann-Schalter geben. Diese Schalter mit dem etwas makaberen Namen sind eine ganze sinnige Erfindung. Diese Schalter m\u00fcssen vom Zugf\u00fchrer innerhalb einer gewissen Zeit immer wieder gedr\u00fcckt werden. Vergisst der Zugf\u00fchrer dies, zum Beispiel weil\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.nerdiy.de\/wp-content\/uploads\/2018\/10\/www.nerdiy.de-nodered-tasmota-ein-tot-mann-schalter-oder-wie-man-das-ausbleiben-von-status-nachrichten-als-ereignis-nutzen-chrome-2018-10-25-20-39-26.png?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":2447,"url":"https:\/\/nerdiy.de\/en\/build-your-own-opensource-smarthome-2\/","url_meta":{"origin":8267,"position":4},"title":"Build your own OpenSource SmartHome","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ich muss zugeben ich habe noch nicht die perfekte L\u00f6sung gefunden um alle SmartHome-relevanten Artikel \u00fcbersichtlich aufzulisten. Um bis dahin zumindest etwas \u00dcbersicht in die verf\u00fcgbaren SmartHome-Artikel zu bringen kommt hier die folgende Liste mit allen aktuell verf\u00fcgbaren und teilweise geplanten Artikeln. :) Allgemein\/Diverses NodeRed \u2013 Installation von NodeRed auf\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":3480,"url":"https:\/\/nerdiy.de\/en\/tasmota-sonoff-rf-bridge-rf-chipefm8bb1-with-portic-firmware-flashing-2\/","url_meta":{"origin":8267,"position":5},"title":"HowTo: Tasmota \u2013 Flash Sonoff RF Bridge RF-Chip(EFM8BB1) with Portisch firmware","author":"Fab","date":"23. February 2019","format":false,"excerpt":"Dank der sehr universellen Tasmota-Firmware (Sonoff 433Mhz Rf Bridge mit Tasmota Firmware flashen) k\u00f6nnt Ihr mithilfe der Sonoff RF-Bridge so ziemlich jedes 433Mhz Signal senden und empfangen. Dies funktioniert allerdings nur f\u00fcr 433Mhz Signale dessen Funktprotokoll von der Firmware des\u00a0EFM8BB1-Prozessors erkannt wird. Das hei\u00dft Ihr erhaltet - mit der Standardfirmware\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/en\/category\/evening-project2h\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-sonoff-rf-bridge-rf-chipefm8bb1-mit-portisch-firmware-flashen-20181113-215732.jpg?fit=900%2C1200&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-sonoff-rf-bridge-rf-chipefm8bb1-mit-portisch-firmware-flashen-20181113-215732.jpg?fit=900%2C1200&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-sonoff-rf-bridge-rf-chipefm8bb1-mit-portisch-firmware-flashen-20181113-215732.jpg?fit=900%2C1200&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-sonoff-rf-bridge-rf-chipefm8bb1-mit-portisch-firmware-flashen-20181113-215732.jpg?fit=900%2C1200&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/8267","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/comments?post=8267"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/posts\/8267\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media\/12238"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/media?parent=8267"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/categories?post=8267"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/en\/wp-json\/wp\/v2\/tags?post=8267"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}