{"id":20933,"date":"2024-04-14T10:38:19","date_gmt":"2024-04-14T08:38:19","guid":{"rendered":"https:\/\/nerdiy.de\/?post_type=product&p=20933"},"modified":"2024-10-20T21:48:14","modified_gmt":"2024-10-20T19:48:14","slug":"printairpipe-125-servo-valve-3d-printable-stl-files-2","status":"publish","type":"product","link":"https:\/\/nerdiy.de\/en\/product-2\/printairpipe-125-servo-valve-3d-printable-stl-files-2\/","title":{"rendered":"PrintAirPipe - 125mm Servo Valve - 3D printable - STL files"},"content":{"rendered":"

The PrintAirPipe servo valve can be used to block or regulate the air flow in the PrintAirPipe system pipe run. This is practical if, for example, you want to shut off a supply air or exhaust air path.<\/p>\r\n

The control is realized via an MG90 servo and an ESP32 board. Both are installed on the pipe segment and supplied with power via a USB-C connection. The firmware of the ESp32 is based on ESPHome and can therefore be easily integrated into Home Assistant or other SmartHome systems.<\/p>\r\n

The valve can then be closed, opened or even partially opened or closed from the SmartHome system.<\/p>\r\n

The valve status can also be switched between open and closed directly on the unit using a touch switch installed on the unit. The current status of the valve is displayed via an LED on the unit.<\/p>\r\n

Are you looking for other offers for the PrintAirPipe system?
There are also the following segments:<\/strong><\/p>\r\n