{"id":2253,"date":"2019-02-28T18:30:46","date_gmt":"2019-02-28T17:30:46","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=2253"},"modified":"2019-07-31T06:52:43","modified_gmt":"2019-07-31T04:52:43","slug":"construire-une-lampe-tasmota-retro-bulb-smart-home","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/fr\/construire-une-lampe-tasmota-retro-bulb-smart-home\/","title":{"rendered":"HowTo: Tasmota - Construire une lampe de maison intelligente \u00e0 ampoule r\u00e9tro"},"content":{"rendered":"

Comme dans \u00e7a Projet d'enceinte r\u00e9tro<\/strong><\/em><\/a> c'est un de mes petits passe-temps de donner un nouvel usage aux vieilles choses. Si vous pouvez \u00e9galement am\u00e9liorer l'ancienne technologie et la rendre plus \u00e9conome en \u00e9nergie, par exemple, c'est une excellente cerise sur le g\u00e2teau.<\/p>\n

C'est ce qui s'est pass\u00e9 r\u00e9cemment lorsque je suis tomb\u00e9 sur une bo\u00eete de vieilles ampoules. Je ne voulais plus les utiliser, car je suis maintenant \u00e0 la poursuite de cette nouvelle tendance qui consiste \u00e0 vraiment utiliser le radiateur pour chauffer.<\/p>\n

Mais j'ai aussi pens\u00e9 qu'il \u00e9tait dommage de simplement jeter les vieilles lampes. J'ai donc d\u00e9cid\u00e9 de donner aux vieilles ampoules "stupides" un nouveau fonctionnement interne intelligent. Au moins une lampe d\u00e9corative respectable devrait pouvoir \u00eatre construite avec.
\nJ'ai d\u00e9crit dans l'article suivant comment cela fonctionne et ce que vous devez prendre en compte lors de la r\u00e9plication.<\/p>\n

\n

Consignes de s\u00e9curit\u00e9 <\/span><\/h2>\r\n

Je sais que les notes suivantes sont toujours un peu ennuyeuses et semblent inutiles. Malheureusement, de nombreuses personnes qui savaient "mieux" ont perdu des yeux, des doigts ou d'autres choses \u00e0 cause d'une n\u00e9gligence ou se sont bless\u00e9es. La perte de donn\u00e9es est presque n\u00e9gligeable en comparaison, mais m\u00eame celles-ci peuvent \u00eatre vraiment ennuyeuses. Par cons\u00e9quent, veuillez prendre cinq minutes pour lire les consignes de s\u00e9curit\u00e9. Parce que m\u00eame le projet le plus cool ne vaut pas une blessure ou d'autres probl\u00e8mes.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Liens d'affiliation\/publicitaires<\/h2>\r\n

Les liens vers des boutiques en ligne r\u00e9pertori\u00e9s ici sont des liens dits d'affiliation. Si vous cliquez sur un tel lien d'affiliation et effectuez un achat via ce lien, Nerdiy.de recevra une commission de la boutique en ligne ou du fournisseur concern\u00e9. Le prix ne change pas pour vous. Si vous effectuez vos achats via ces liens, vous aidez Nerdiy.de \u00e0 pouvoir proposer d'autres projets utiles \u00e0 l'avenir. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Conditions pr\u00e9alables<\/h2>\n

Articles utiles :
\n<\/strong>Avant de commencer cet article, vous devriez avoir trait\u00e9 les bases de la soudure. Vous trouverez des informations \u00e0 ce sujet dans l'article suivant.
\n\u00c9lectronique - Mon ami le fer \u00e0 souder<\/a><\/em><\/strong><\/p>\n

Mat\u00e9riel requis :<\/strong><\/p>\n

Dans la liste suivante, vous trouverez toutes les pi\u00e8ces dont vous avez besoin pour mettre en \u0153uvre cet article.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n

Outil requis\u00a0:<\/strong><\/p>\n

Dans la liste suivante, vous trouverez tous les outils dont vous avez besoin pour mettre en \u0153uvre cet article.<\/strong><\/p>\n

\n
\n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Rassemblez les pi\u00e8ces dont vous avez besoin<\/h2>\n

Pour configurer votre lampe de maison intelligente \u00e0 ampoule r\u00e9tro, vous avez besoin des pi\u00e8ces indiqu\u00e9es ou de celles r\u00e9pertori\u00e9es dans les exigences. En ce qui concerne la carte adaptateur ESP8266, cela ne doit pas n\u00e9cessairement \u00eatre un Wemos D1-Mini. Cependant, il s'agit de l'une des cartes d'adaptation les plus petites du march\u00e9 et pour cette raison, au moins dans la version 40W, il n'y a pratiquement pas d'alternative - les cartes d'adaptation plus grandes ne s'int\u00e8grent tout simplement pas aussi bien dans la douille de la lampe.<\/p>\n

\"\"<\/a>
Vue des pi\u00e8ces requises.<\/figcaption><\/figure>\n
\"\"<\/a>
L'ampoule doit d\u00e9j\u00e0 \u00eatre "noy\u00e9e". Comment faire cela est dans l'article\u00a0Lampes \u00e0 incandescence "Core"<\/em> <\/span><\/a><\/b><\/span>expliqu\u00e9.<\/figcaption><\/figure>\n
\"\"<\/a>
La douille de lampe maintient plus tard l'ampoule droite et cache \u00e9galement la carte adaptateur ESP8266.<\/figcaption><\/figure>\n
\"\"<\/a>
Les six LED WS2812B assurent l'\u00e9clairage de la lampe. Leur couleur et leur luminosit\u00e9 peuvent ensuite \u00eatre ajust\u00e9es via une interface Web.<\/figcaption><\/figure>\n
\n

Imprimez en 3D les pi\u00e8ces dont vous avez besoin<\/h2>\n

T\u00e9l\u00e9chargez tous les fichiers STL requis\u00a0: Tasmota - Construire une lampe de maison intelligente \u00e0 ampoule r\u00e9tro<\/a><\/strong><\/em><\/p>\n

Douille pour lampe \u00e0 incandescence 40W :<\/strong><\/p>\n

Vous pouvez faire pivoter la vue 3D du fichier STL en maintenant le bouton de la souris enfonc\u00e9. Vous pouvez zoomer et d\u00e9zoomer avec la molette de la souris.<\/p>\n

Douille pour lampe \u00e0 incandescence 100W :<\/strong><\/p>\n

Vous pouvez faire pivoter la vue 3D du fichier STL en maintenant le bouton de la souris enfonc\u00e9. Vous pouvez zoomer et d\u00e9zoomer avec la molette de la souris.<\/p>\n

Socle \u00e0 vis 100W :<\/strong><\/p>\n

Vous pouvez faire pivoter la vue 3D du fichier STL en maintenant le bouton de la souris enfonc\u00e9. Vous pouvez zoomer et d\u00e9zoomer avec la molette de la souris.<\/p>\n

\n

sch\u00e9ma<\/h2>\n

Vous trouverez ici les sch\u00e9mas de circuit qui indiquent comment la lampe est construite en principe.<\/p>\n

\"\"<\/a>
Sch\u00e9ma de c\u00e2blage normal.<\/figcaption><\/figure>\n
\"\"<\/a>
Le point de vue de Fritzing.<\/figcaption><\/figure>\n
\n

fixer les LED<\/h2>\n

La premi\u00e8re \u00e9tape de votre propre lampe de maison intelligente \u00e0 ampoule r\u00e9tro consiste \u00e0 fixer les bandes de LED. Ceux-ci doivent d\u00e9j\u00e0 \u00eatre coup\u00e9s par paires de deux.<\/p>\n

\"\"<\/a>
Collez ensuite la premi\u00e8re bande LED sur le c\u00f4t\u00e9 o\u00f9 se trouve le trou dans l'arbre de la base de la lampe, comme indiqu\u00e9. La ligne qui relie votre carte adaptateur ESP8266 aux LED sera ensuite aliment\u00e9e par ici. Il est important \u00e0 ce stade de pr\u00eater attention au \u00ab sens de marche \u00bb des LED. \u00c0 ce stade, la fl\u00e8che noire sur la bande LED doit pointer vers le haut - c'est-\u00e0-dire loin du trou.<\/figcaption><\/figure>\n
\"\"<\/a>
Ensuite, la bande LED suivante est coll\u00e9e. Ici, le "sens de marche" est \u00e0 nouveau modifi\u00e9 - la fl\u00e8che noire pointe vers le bas.<\/figcaption><\/figure>\n
\"\"<\/a>
La derni\u00e8re bande LED est coll\u00e9e sur le seul espace libre restant. Le "sens de marche" est \u00e0 nouveau modifi\u00e9. Cette fois, les fl\u00e8ches noires sur la bande LED pointent vers le haut.<\/figcaption><\/figure>\n
\n

Souder les premi\u00e8res LED<\/h2>\n

Comme les LED peuvent \u00e9galement \u00eatre aliment\u00e9es en \u00e9nergie et en donn\u00e9es (couleur, luminosit\u00e9, etc.), elles doivent bien entendu \u00eatre connect\u00e9es \u00e0 la carte adaptateur ESP8266.<\/p>\n

\"\"<\/a>
Pour cela, vous avez besoin d'un c\u00e2ble \u00e0 3 conducteurs de 20 cm de long.<\/figcaption><\/figure>\n
\"\"<\/a>
Isole les lignes individuelles d'environ 3 \u00e0 5 mm...<\/figcaption><\/figure>\n
\"\"<\/a>
...et \u00e9tamer les extr\u00e9mit\u00e9s des c\u00e2bles devenues libres. Vous trouverez des conseils sur l'utilisation du fer \u00e0 souder dans l'article \u00c9lectronique - Mon ami le fer \u00e0 souder<\/a><\/em><\/strong>.<\/figcaption><\/figure>\n
\"\"<\/a>
Ensuite, vous pouvez ins\u00e9rer le c\u00e2ble dans l'arbre de la base de la lampe...<\/figcaption><\/figure>\n
\"\"<\/a>
...et soudez-le aux contacts de la premi\u00e8re bande LED. Assurez-vous que le "sens de marche" des bandes LED est correct. Les fl\u00e8ches noires doivent pointer \u00e0 l'oppos\u00e9 du c\u00e2ble de raccordement sur la premi\u00e8re bande LED.<\/figcaption><\/figure>\n
\n

Connectez les LED \u00e0 la carte adaptateur ESP8266<\/h2>\n

Avant que les autres LED ne soient soud\u00e9es, la carte adaptateur ESP8266 est d'abord connect\u00e9e \u00e0 la ligne d'alimentation des LED, car vous pouvez ainsi utiliser les lignes restantes.<\/p>\n

Avant de commencer l'installation de la carte adaptateur ESP8266, je vous recommande \u00e9galement de retirer la LED int\u00e9gr\u00e9e de la carte adaptateur si n\u00e9cessaire. Malheureusement, cela brille si fort qu'il est autrement visible \u00e0 travers le plastique de la base. Comment vous pouvez le faire est dans l'article ESP8266 - Supprimer\/D\u00e9sactiver la LED<\/a><\/strong><\/em> d\u00e9crites.<\/p>\n

\"\"<\/a>
Le c\u00e2ble doit d\u00e9j\u00e0 sortir de la prise. Divise les lignes individuelles jusqu'au trou de sortie dans la base...<\/figcaption><\/figure>\n
\"\"<\/a>
... et colle la carte adaptateur ESP8266 dans la prise. Cela fonctionne tr\u00e8s bien avec du ruban adh\u00e9sif double face plus \u00e9pais ou de la colle chaude. Il est important que le port USB de la carte adaptateur pointe dans la direction du renflement de la prise. C'est la seule fa\u00e7on de connecter ult\u00e9rieurement la lampe \u00e0 un c\u00e2ble USB.<\/figcaption><\/figure>\n
\"\"<\/a>
Une fois que vous avez coll\u00e9 la carte adaptateur ESP8266 et l'avez align\u00e9e en cons\u00e9quence, vous pouvez\u2026<\/figcaption><\/figure>\n
\"\"<\/a>
...raccourcissez les lignes de mani\u00e8re \u00e0 ce qu'elles d\u00e9passent d'environ 3 \u00e0 4 cm.<\/figcaption><\/figure>\n
\"\"<\/a>
Isole \u00e0 nouveau environ 3-5 mm des lignes et...<\/figcaption><\/figure>\n
\"\"<\/a>
...les \u00e9tamer avec de la soudure.<\/figcaption><\/figure>\n
\"\"<\/a>
Pr\u00e9parez ici les contacts de la carte adaptateur ESP8266 en \u00e9tamant au pr\u00e9alable les contacts de connexion \u00ab D2 \u00bb, \u00ab G \u00bb et \u00ab 5V \u00bb.<\/figcaption><\/figure>\n
\"\"<\/a>
une fois que vous avez \u00e9tam\u00e9 tous les spots, vous pouvez...<\/figcaption><\/figure>\n
\"\"<\/a>
... d\u00e9j\u00e0 souder les lignes. Assurez-vous que les lignes se connectent aux bons endroits entre les bandes LED et la carte adaptateur ESP8266. "+5V" de la LED doit \u00eatre connect\u00e9 \u00e0 "5V" de la carte adaptateur, "GND" de la LED \u00e0 "G" de la carte adaptateur et "DIN" de la LED \u00e0 "D2" de la carte adaptateur.<\/figcaption><\/figure>\n
\"\"<\/a>
Voici un autre gros plan du c\u00e2ble soud\u00e9.<\/figcaption><\/figure>\n
\n

Soudez les bandes LED restantes ensemble<\/h2>\n

Jusqu'\u00e0 pr\u00e9sent, seules deux des six LED ou l'un des trois \u00e9l\u00e9ments de bande LED ont \u00e9t\u00e9 soud\u00e9s ensemble. Pour souder les bandes LED restantes, vous pouvez maintenant utiliser le fil restant que vous avez coup\u00e9 \u00e0 l'\u00e9tape pr\u00e9c\u00e9dente.<\/p>\n

\"\"<\/a>
Avant de pouvoir commencer \u00e0 connecter les bandes LED, vous devez \u00e0 nouveau pr\u00e9parer tous les points de contact.<\/figcaption><\/figure>\n
\"\"<\/a>
Pour ce faire, \u00e9tamez les contacts sur le dessus de la premi\u00e8re bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Et aussi les contacts haut et bas des deuxi\u00e8me et\u2026<\/figcaption><\/figure>\n
\"\"<\/a>
...troisi\u00e8me bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Pour connecter les bandes LED restantes entre elles, pr\u00e9parez six morceaux de c\u00e2ble d'environ 2 cm de long. Ce faisant, isolez \u00e0 nouveau les extr\u00e9mit\u00e9s du c\u00e2ble d'environ 3 \u00e0 5 mm et \u00e9tamez les extr\u00e9mit\u00e9s du c\u00e2ble.<\/figcaption><\/figure>\n
\"\"<\/a>
Puisque vous avez d\u00e9j\u00e0 pr\u00e9par\u00e9 les contacts sur les bandes LED, vous pouvez d\u00e9j\u00e0 souder sur les trois premi\u00e8res lignes de connexion.<\/figcaption><\/figure>\n
\"\"<\/a>
Voici un gros plan des trois premi\u00e8res lignes de connexion soud\u00e9es.<\/figcaption><\/figure>\n
\"\"<\/a>
Vous pouvez maintenant le plier et le connecter \u00e0 la deuxi\u00e8me bande LED. Assurez-vous de connecter les bons contacts. "GND" de la premi\u00e8re bande de LED doit \u00e9galement \u00eatre connect\u00e9 \u00e0 "GND" de la deuxi\u00e8me bande de LED. Aussi "+5V" avec "+5V" et "Dout" de la premi\u00e8re bande avec "Din" de la deuxi\u00e8me bande.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan du fil soud\u00e9 sur la deuxi\u00e8me bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan de la connexion entre la premi\u00e8re et la deuxi\u00e8me bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Vous pouvez maintenant souder les trois lignes restantes \u00e0 la deuxi\u00e8me bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan des fils soud\u00e9s sur la deuxi\u00e8me bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Vous pouvez ensuite les souder \u00e0 la troisi\u00e8me (et derni\u00e8re) bande LED.<\/figcaption><\/figure>\n
\"\"<\/a>
Une fois que vous avez soud\u00e9 toutes les bandes de LED, cela devrait ressembler \u00e0 ceci. \u00c0 ce stade, v\u00e9rifiez \u00e0 nouveau que vous avez soud\u00e9 les lignes aux bons contacts.<\/figcaption><\/figure>\n
\"\"<\/a>
Vue d'ensemble des rubans LED soud\u00e9s.<\/figcaption><\/figure>\n
\"\"<\/a>
Enregistrement suppl\u00e9mentaire des bandes de LED soud\u00e9es.<\/figcaption><\/figure>\n
\"\"<\/a>
Vous devez maintenant poser les lignes soud\u00e9es aussi \u00e9troitement que possible autour du culot de la lampe.<\/figcaption><\/figure>\n
\"\"<\/a>
...alors vous n'aurez aucun probl\u00e8me \u00e0 ins\u00e9rer plus tard les LED et le culot de la lampe dans l'ampoule \u00e0 noyau.<\/figcaption><\/figure>\n
\n

Programmer la carte adaptateur ESP8266 et effectuer le premier test<\/h2>\n

Une fois le dernier joint de soudure refroidi, il est temps de proc\u00e9der \u00e0 un premier test. Lancez le micrologiciel Tasmota sur la carte adaptateur et testez les voyants. Comment faire cela est dans l'article Tasmota - micrologiciel flash<\/a><\/strong><\/em> d\u00e9crites.<\/p>\n

Voici une configuration que j'ai utilis\u00e9e pour ma lampe. Bien entendu, vous devez encore configurer les donn\u00e9es d'acc\u00e8s pour votre WLAN et, si n\u00e9cessaire, les donn\u00e9es d'acc\u00e8s pour votre serveur MQTT.<\/p>\n

\/*\r\n  user_config.h - user specific configuration for Sonoff-Tasmota\r\n\r\n  Copyright (C) 2018  Theo Arends\r\n\r\n  This program is free software: you can redistribute it and\/or modify\r\n  it under the terms of the GNU General Public License as published by\r\n  the Free Software Foundation, either version 3 of the License, or\r\n  (at your option) any later version.\r\n\r\n  This program is distributed in the hope that it will be useful,\r\n  but WITHOUT ANY WARRANTY; without even the implied warranty of\r\n  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\r\n  GNU General Public License for more details.\r\n\r\n  You should have received a copy of the GNU General Public License\r\n  along with this program.  If not, see <http:\/\/www.gnu.org\/licenses\/>.\r\n*\/\r\n\r\n#ifndef _USER_CONFIG_H_\r\n#define _USER_CONFIG_H_\r\n\r\n\/*********************************************************************************************\r\n * This file consists of TWO sections.\r\n *\r\n * SECTION 1:\r\n * The first section contains PARAMETERS overriding flash settings if define CFG_HOLDER is CHANGED.\r\n * All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.\r\n *   Corresponding MQTT\/Serial\/Console commands are shown in [brackets]\r\n *\r\n * SECTION 2:\r\n * The second section contains Enabled and Disabled FEATURES allowing different program size.\r\n *   Changes in this section do NOT need a change of define CFG_HOLDER.\r\n *\r\n * ATTENTION:\r\n * Users are advised to use the user_config_override.h file for most changes.\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CONFIG_OVERRIDE                      \/\/ Uncomment to use user_config_override.h file. See README.md\r\n\r\n\/*********************************************************************************************\r\n * SECTION 1\r\n * - After initial load any change here only take effect if CFG_HOLDER is changed too\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Master parameter control --------------------\r\n#define CFG_HOLDER             4617              \/\/ [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash\r\n\r\n\/\/ -- Project -------------------------------------\r\n#define PROJECT                \"GluehLampe\"          \/\/ PROJECT is used as the default topic delimiter\r\n#define MODULE                 WEMOS      \/\/ [Module] Select default model from sonoff_template.h (Should not be changed)\r\n\r\n#define SAVE_DATA              1                 \/\/ [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)\r\n#define SAVE_STATE             1                 \/\/ [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)\r\n\r\n\/\/ -- Wifi ----------------------------------------\r\n#define WIFI_IP_ADDRESS        \"0.0.0.0\"         \/\/ [IpAddress1] Set to 0.0.0.0 for using DHCP or IP address\r\n#define WIFI_GATEWAY           \"192.168.0.1\"   \/\/ [IpAddress2] If not using DHCP set Gateway IP address\r\n#define WIFI_SUBNETMASK        \"255.255.255.0\"   \/\/ [IpAddress3] If not using DHCP set Network mask\r\n#define WIFI_DNS               \"192.168.0.1\"    \/\/ [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)\r\n\r\n#define STA_SSID1              \"\"                \/\/ [Ssid1] Wifi SSID\r\n#define STA_PASS1              \"\"                \/\/ [Password1] Wifi password\r\n#define STA_SSID2              \"\"                \/\/ [Ssid2] Optional alternate AP Wifi SSID\r\n#define STA_PASS2              \"\"                \/\/ [Password2] Optional alternate AP Wifi password\r\n#define WIFI_CONFIG_TOOL       WIFI_MANAGER         \/\/ [WifiConfig] Default tool if wifi fails to connect\r\n                                                 \/\/   (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)\r\n#define WIFI_CONFIG_NO_SSID    WIFI_WPSCONFIG    \/\/ Default tool if wifi fails to connect and no SSID is configured\r\n                                                 \/\/   (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)\r\n                                                 \/\/   *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***\r\n                                                 \/\/   *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***\r\n                                                 \/\/   *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***\r\n\r\n\/\/ -- Syslog --------------------------------------\r\n#define SYS_LOG_HOST           \"\"                \/\/ [LogHost] (Linux) syslog host\r\n#define SYS_LOG_PORT           514               \/\/ [LogPort] default syslog UDP port\r\n#define SYS_LOG_LEVEL          LOG_LEVEL_NONE    \/\/ [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define SERIAL_LOG_LEVEL       LOG_LEVEL_DEBUG    \/\/ [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define WEB_LOG_LEVEL          LOG_LEVEL_INFO    \/\/ [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n\r\n\/\/ -- Ota -----------------------------------------\r\n#define OTA_URL                \"http:\/\/sonoff.maddox.co.uk\/tasmota\/sonoff.bin\"  \/\/ [OtaUrl]\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_USE               1                 \/\/ [SetOption3] Select default MQTT use (0 = Off, 1 = On)\r\n\r\n#define MQTT_HOST              \"\"                \/\/ [MqttHost]\r\n#define MQTT_FINGERPRINT1      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint1]\r\n#define MQTT_FINGERPRINT2      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint2]\r\n#define MQTT_PORT              1883              \/\/ [MqttPort] MQTT port (10123 on CloudMQTT)\r\n#define MQTT_USER              \"DVES_USER\"       \/\/ [MqttUser] MQTT user\r\n#define MQTT_PASS              \"DVES_PASS\"       \/\/ [MqttPassword] MQTT password\r\n\r\n#define MQTT_BUTTON_RETAIN     0                 \/\/ [ButtonRetain] Button may send retain flag (0 = off, 1 = on)\r\n#define MQTT_POWER_RETAIN      0                 \/\/ [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)\r\n#define MQTT_SWITCH_RETAIN     0                 \/\/ [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)\r\n\r\n#define MQTT_STATUS_OFF        \"OFF\"             \/\/ [StateText1] Command or Status result when turned off (needs to be a string like \"0\" or \"Off\")\r\n#define MQTT_STATUS_ON         \"ON\"              \/\/ [StateText2] Command or Status result when turned on (needs to be a string like \"1\" or \"On\")\r\n#define MQTT_CMND_TOGGLE       \"TOGGLE\"          \/\/ [StateText3] Command to send when toggling (needs to be a string like \"2\" or \"Toggle\")\r\n#define MQTT_CMND_HOLD         \"HOLD\"            \/\/ [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like \"HOLD\")\r\n\r\n\/\/ -- MQTT topics ---------------------------------\r\n  \/\/ Example \"tasmota\/bedroom\/%topic%\/%prefix%\/\" up to 80 characers\r\n#define MQTT_FULLTOPIC         \"%prefix%\/%topic%\/\" \/\/ [FullTopic] Subscribe and Publish full topic name - Legacy topic\r\n\r\n\/\/ %prefix% token options\r\n#define SUB_PREFIX             \"cmnd\"            \/\/ [Prefix1] Sonoff devices subscribe to %prefix%\/%topic% being SUB_PREFIX\/MQTT_TOPIC and SUB_PREFIX\/MQTT_GRPTOPIC\r\n#define PUB_PREFIX             \"stat\"            \/\/ [Prefix2] Sonoff devices publish to %prefix%\/%topic% being PUB_PREFIX\/MQTT_TOPIC\r\n#define PUB_PREFIX2            \"tele\"            \/\/ [Prefix3] Sonoff devices publish telemetry data to %prefix%\/%topic% being PUB_PREFIX2\/MQTT_TOPIC\/UPTIME, POWER and TIME\r\n                                                 \/\/   May be named the same as PUB_PREFIX\r\n\/\/ %topic% token options (also ButtonTopic and SwitchTopic)\r\n#define MQTT_TOPIC             PROJECT           \/\/ [Topic] (unique) MQTT device topic, set to 'PROJECT \"_%06X\"' for unique topic including device MAC address\r\n#define MQTT_GRPTOPIC          \"sonoffs\"         \/\/ [GroupTopic] MQTT Group topic\r\n#define MQTT_BUTTON_TOPIC      \"0\"               \/\/ [ButtonTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_BTN_%06X\"' for unique topic including device MAC address\r\n#define MQTT_SWITCH_TOPIC      \"0\"               \/\/ [SwitchTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_SW_%06X\"' for unique topic including device MAC address\r\n#define MQTT_CLIENT_ID         \"DVES_%06X\"       \/\/ [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address\r\n\r\n\/\/ -- MQTT - Telemetry ----------------------------\r\n#define TELE_PERIOD            300               \/\/ [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n#define DOMOTICZ_UPDATE_TIMER  0                 \/\/ [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n#define HOME_ASSISTANT_DISCOVERY_ENABLE   0      \/\/ [SetOption19] Home Assistant Discovery (0 = Disable, 1 = Enable)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define WEB_SERVER             2                 \/\/ [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)\r\n#define WEB_PASSWORD           \"\"                \/\/ [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)\r\n#define FRIENDLY_NAME          \"GluehLampe\"          \/\/ [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa\r\n#define EMULATION              EMUL_NONE         \/\/ [Emulation] Select Belkin WeMo (single relay\/light) or Hue Bridge emulation (multi relay\/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)\r\n\r\n\/\/ -- Time - Up to three NTP servers in your region\r\n#define NTP_SERVER1            \"pool.ntp.org\"       \/\/ [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)\r\n#define NTP_SERVER2            \"nl.pool.ntp.org\"    \/\/ [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)\r\n#define NTP_SERVER3            \"0.nl.pool.ntp.org\"  \/\/ [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)\r\n\r\n\/\/ -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes\r\n#define TIME_DST_HEMISPHERE    North              \/\/ [TimeDst] Hemisphere (0 or North, 1 or South)\r\n#define TIME_DST_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_DST_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_DST_MONTH         Mar                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_DST_HOUR          2                  \/\/ Hour (0 to 23)\r\n#define TIME_DST_OFFSET        +120               \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Time - Start Standard Time and timezone offset from UTC in minutes\r\n#define TIME_STD_HEMISPHERE    North              \/\/ [TimeStd] Hemisphere (0 or North, 1 or South)\r\n#define TIME_STD_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_STD_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_STD_MONTH         Oct                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_STD_HOUR          3                  \/\/ Hour (0 to 23)\r\n#define TIME_STD_OFFSET        +60                \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Location ------------------------------------\r\n#define LATITUDE               48.858360         \/\/ [Latitude] Your location to be used with sunrise and sunset\r\n#define LONGITUDE              2.294442          \/\/ [Longitude] Your location to be used with sunrise and sunset\r\n\r\n\/\/ -- Application ---------------------------------\r\n#define APP_TIMEZONE           1                 \/\/ [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST\/TIME_STD)\r\n#define APP_LEDSTATE           LED_POWER         \/\/ [LedState] Function of led\r\n                                                 \/\/   (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)\r\n#define APP_PULSETIME          0                 \/\/ [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)\r\n#define APP_POWERON_STATE      POWER_ALL_SAVED   \/\/ [PowerOnState] Power On Relay state\r\n                                                 \/\/   (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON)\r\n#define APP_BLINKTIME          10                \/\/ [BlinkTime] Time in 0.1 Sec to blink\/toggle power for relay 1\r\n#define APP_BLINKCOUNT         10                \/\/ [BlinkCount] Number of blinks (0 = 32000)\r\n#define APP_SLEEP              0                 \/\/ [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)\r\n\r\n#define KEY_DEBOUNCE_TIME      50                \/\/ [ButtonDebounce] Number of mSeconds button press debounce time\r\n#define KEY_HOLD_TIME          40                \/\/ [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message\r\n#define SWITCH_DEBOUNCE_TIME   50                \/\/ [SwitchDebounce] Number of mSeconds switch press debounce time\r\n#define SWITCH_MODE            TOGGLE            \/\/ [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE (the wall switch state)\r\n#define WS2812_LEDS            6                \/\/ [Pixels] Number of WS2812 LEDs to start with (max is 512)\r\n\r\n#define TEMP_CONVERSION        0                 \/\/ [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)\r\n#define TEMP_RESOLUTION        1                 \/\/ [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature\r\n#define HUMIDITY_RESOLUTION    1                 \/\/ [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity\r\n#define PRESSURE_RESOLUTION    1                 \/\/ [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure\r\n#define ENERGY_RESOLUTION      3                 \/\/ [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh\r\n\r\n\/*********************************************************************************************\r\n * END OF SECTION 1\r\n *\r\n * SECTION 2\r\n * - Enable a feature by removing both \/\/ in front of it\r\n * - Disable a feature by preceding it with \/\/\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Localization --------------------------------\r\n  \/\/ If non selected the default en-GB will be used\r\n\/\/#define MY_LANGUAGE            bg-BG           \/\/ Bulgarian in Bulgaria\r\n\/\/#define MY_LANGUAGE            cs-CZ           \/\/ Czech in Czech\r\n#define MY_LANGUAGE            de-DE           \/\/ German in Germany\r\n\/\/#define MY_LANGUAGE            el-GR           \/\/ Greek in Greece\r\n\/\/#define MY_LANGUAGE            en-GB           \/\/ English in Great Britain. Enabled by Default\r\n\/\/#define MY_LANGUAGE            es-AR           \/\/ Spanish in Argentina\r\n\/\/#define MY_LANGUAGE            fr-FR           \/\/ French in France\r\n\/\/#define MY_LANGUAGE            hu-HU           \/\/ Hungarian in Hungary\r\n\/\/#define MY_LANGUAGE            it-IT           \/\/ Italian in Italy\r\n\/\/#define MY_LANGUAGE            nl-NL           \/\/ Dutch in the Netherlands\r\n\/\/#define MY_LANGUAGE            pl-PL           \/\/ Polish in Poland\r\n\/\/#define MY_LANGUAGE            pt-BR           \/\/ Portuguese in Brazil\r\n\/\/#define MY_LANGUAGE            pt-PT           \/\/ Portuguese in Portugal\r\n\/\/#define MY_LANGUAGE            ru-RU           \/\/ Russian in Russia\r\n\/\/#define MY_LANGUAGE            tr-TR           \/\/ Turkish in Turkey\r\n\/\/#define MY_LANGUAGE            uk-UK           \/\/ Ukrainian in Ukrain\r\n\/\/#define MY_LANGUAGE            zh-CN           \/\/ Chinese (Simplified) in China\r\n\/\/#define MY_LANGUAGE            zh-TW           \/\/ Chinese (Traditional) in Taiwan\r\n\r\n\/\/ -- Wifi Config tools ---------------------------\r\n\/\/#define USE_WPS                                  \/\/ Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))\r\n\/\/#define USE_SMARTCONFIG                          \/\/ Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)\r\n\r\n\/\/ -- OTA -----------------------------------------\r\n#define USE_ARDUINO_OTA                          \/\/ Add optional support for Arduino OTA (+13k code)\r\n\r\n\/*-------------------------------------------------------------------------------------------*\r\n * Select ONE of possible three MQTT library types below\r\n*-------------------------------------------------------------------------------------------*\/\r\n  \/\/ Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.\r\n#define MQTT_LIBRARY_TYPE      MQTT_PUBSUBCLIENT   \/\/ Use PubSubClient library\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_TASMOTAMQTT    \/\/ Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_ESPMQTTARDUINO \/\/ Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_TELE_RETAIN     0                   \/\/ Tele messages may send retain flag (0 = off, 1 = on)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n\/\/#define USE_DOMOTICZ                             \/\/ Enable Domoticz (+6k code, +0.3k mem)\r\n  #define DOMOTICZ_IN_TOPIC    \"domoticz\/in\"     \/\/ Domoticz Input Topic\r\n  #define DOMOTICZ_OUT_TOPIC   \"domoticz\/out\"    \/\/ Domoticz Output Topic\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n\/\/#define USE_HOME_ASSISTANT                       \/\/ Enable Home Assistant Discovery Support (+2k code)\r\n  #define HOME_ASSISTANT_DISCOVERY_PREFIX \"homeassistant\"  \/\/ Home Assistant discovery prefix\r\n\r\n\/\/ -- MQTT - TLS ----------------------------------\r\n  \/\/ !!! TLS uses a LOT OF MEMORY so be careful to enable other options at the same time !!!\r\n\/\/#define USE_MQTT_TLS                             \/\/ Use TLS for MQTT connection (+53k code, +15k mem)\r\n\r\n\/\/ -- KNX IP Protocol -----------------------------\r\n\/\/#define USE_KNX                                  \/\/ Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)\r\n\/\/  #define USE_KNX_WEB_MENU                       \/\/ Enable KNX WEB MENU (+8.3k code, +144 mem)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define USE_WEBSERVER                            \/\/ Enable web server and Wifi Manager (+66k code, +8k mem)\r\n  #define WEB_PORT             80                \/\/ Web server Port for User and Admin mode\r\n  #define WEB_USERNAME         \"admin\"           \/\/ Web server Admin mode user name\r\n  #define USE_EMULATION                          \/\/ Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)\r\n\r\n\/\/ -- mDNS ----------------------------------------\r\n#define USE_DISCOVERY                            \/\/ Enable mDNS for the following services (+8k code, +0.3k mem)\r\n  #define WEBSERVER_ADVERTISE                    \/\/ Provide access to webserver by name .local\/\r\n  #define MQTT_HOST_DISCOVERY                    \/\/ Find MQTT host server (overrides MQTT_HOST if found)\r\n\r\n\/\/ -- Time ----------------------------------------\r\n#define USE_TIMERS                               \/\/ Add support for up to 16 timers (+2k2 code)\r\n  #define USE_TIMERS_WEB                         \/\/ Add timer webpage support (+4k5 code)\r\n  #define USE_SUNRISE                            \/\/ Add support for Sunrise and sunset tools (+16k)\r\n    #define SUNRISE_DAWN_ANGLE DAWN_NORMAL       \/\/ Select desired Dawn Angle from (DAWN_NORMAL, DAWN_CIVIL, DAWN_NAUTIC, DAWN_ASTRONOMIC)\r\n\r\n\/\/ -- Rules ---------------------------------------\r\n#define USE_RULES                                \/\/ Add support for rules (+4k4 code)\r\n\r\n\/\/ -- Internal Analog input -----------------------\r\n\/\/#define USE_ADC_VCC                              \/\/ Display Vcc in Power status. Disable for use as Analog input on selected devices\r\n\r\n\/\/ -- One wire sensors ----------------------------\r\n                                                 \/\/ WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors\r\n\/\/#define USE_DS18x20                              \/\/ Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)\r\n\/\/#define USE_DS18x20_LEGACY                       \/\/ Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)\r\n\r\n\/\/ -- I2C sensors ---------------------------------\r\n\/\/#define USE_I2C                                  \/\/ I2C using library wire (+10k code, 0k2 mem, 124 iram)\r\n\r\n#ifdef USE_I2C\r\n\/\/  #define USE_SHT                                \/\/ Enable SHT1X sensor (+1k4 code)\r\n\/\/  #define USE_HTU                                \/\/ Enable HTU21\/SI7013\/SI7020\/SI7021 sensor (I2C address 0x40) (+1k5 code)\r\n    \/\/#define USE_BMP                                \/\/ Enable BMP085\/BMP180\/BMP280\/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)\r\n\/\/  #define USE_BME680                           \/\/ Enable support for BME680 sensor using Bosch BME680 library (+4k code)\r\n\/\/  #define USE_BH1750                             \/\/ Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)\r\n\/\/  #define USE_VEML6070                           \/\/ Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)\r\n\/\/  #define USE_ADS1115                            \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)\r\n\/\/  #define USE_ADS1115_I2CDEV                     \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)\r\n\/\/  #define USE_INA219                             \/\/ Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)\r\n\/\/  #define USE_SHT3X                              \/\/ Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)\r\n\/\/  #define USE_TSL2561                            \/\/ Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)\r\n\/\/  #define USE_MGS                                \/\/ Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)\r\n\/\/  #define MGS_SENSOR_ADDR    0x04              \/\/ Default Mutichannel Gas sensor i2c address\r\n\/\/  #define USE_SGP30                              \/\/ Enable SGP30 sensor (I2C address 0x58) (+1k1 code)\r\n\/\/  #define USE_SI1145                             \/\/ Enable SI1145\/46\/47 sensor (I2C address 0x60) (+1k code)\r\n\/\/  #define USE_LM75AD                             \/\/ Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)\r\n\/\/  #define USE_APDS9960                           \/\/ Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)\r\n\/\/  #define USE_MCP230xx                           \/\/ Enable MCP23008\/MCP23017 for GP INPUT ONLY (I2C addresses 0x20 - 0x27) providing command Sensor29 for configuration (+4k7 code)\r\n\/\/    #define USE_MCP230xx_OUTPUT                  \/\/ Enable MCP23008\/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)\r\n\/\/    #define USE_MCP230xx_DISPLAYOUTPUT           \/\/ Enable MCP23008\/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)\r\n  \/\/#define USE_MPR121                             \/\/ Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)\r\n\/\/  #define USE_CCS811                             \/\/ Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)\r\n\/\/  #define USE_MPU6050                            \/\/ Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)\r\n#endif  \/\/ USE_I2C\r\n\r\n\/\/ -- SPI sensors ---------------------------------\r\n\/\/#define USE_SPI                                  \/\/ SPI using library TasmotaTFT\r\n\r\n#ifdef USE_SPI\r\n\r\n#endif  \/\/ USE_SPI\r\n\r\n\/\/ -- Serial sensors ------------------------------\r\n#define USE_MHZ19                                \/\/ Add support for MH-Z19 CO2 sensor (+2k code)\r\n#define USE_SENSEAIR                             \/\/ Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)\r\n  #define CO2_LOW              800               \/\/ Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n  #define CO2_HIGH             1200              \/\/ Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n#define USE_PMS5003                              \/\/ Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)\r\n#define USE_NOVA_SDS                             \/\/ Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)\r\n#define USE_PZEM004T                             \/\/ Add support for PZEM004T Energy monitor (+2k code)\r\n#define USE_SERIAL_BRIDGE                        \/\/ Add support for software Serial Bridge (+0k8 code)\r\n\/\/#define USE_SDM120                               \/\/ Add support for Eastron SDM120-Modbus energy meter (+1k7 code)\r\n  #define SDM120_SPEED         9600              \/\/ SDM120-Modbus RS485 serial speed (default: 2400 baud)\r\n\/\/#define USE_SDM630                               \/\/ Add support for Eastron SDM630-Modbus energy meter (+2k code)\r\n  #define SDM630_SPEED         9600              \/\/ SDM630-Modbus RS485 serial speed (default: 9600 baud)\r\n\r\n\/\/ -- Low level interface devices -----------------\r\n\/\/#define USE_IR_REMOTE                            \/\/ Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)\r\n\/\/  #define USE_IR_HVAC                            \/\/ Support for HVAC system using IR (+2k code)\r\n\/\/  #define USE_IR_RECEIVE                         \/\/ Support for IR receiver (+5k5 code, 264 iram)\r\n\r\n#define USE_WS2812                               \/\/ WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by \/\/\r\n  #define USE_WS2812_CTYPE     NEO_GRB           \/\/ WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)\r\n\/\/  #define USE_WS2812_DMA                         \/\/ DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow\r\n\r\n\/\/#define USE_ARILUX_RF                            \/\/ Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))\r\n\r\n\/\/#define USE_SR04                                 \/\/ Add support for HC-SR04 ultrasonic devices (+1k code)\r\n\r\n\/\/#define USE_TM1638                               \/\/ Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)\r\n\r\n#define USE_RF_FLASH                             \/\/ Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)\r\n\r\n\/*********************************************************************************************\r\n * Debug features are only supported in development branch\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_DEBUG_DRIVER                         \/\/ Use xdrv_99_debug.ino providing commands CpuChk, CfgXor, CfgDump, CfgPeek and CfgPoke\r\n\r\n\/*********************************************************************************************\r\n * Optional firmware configurations\r\n * Select none or just one for optional features and sensors as configured in sonoff_post.h\r\n * See RELEASENOTES.md for selected features\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CLASSIC                              \/\/ Create sonoff-classic with initial configuration tools WPS, SmartConfig and WifiManager\r\n\/\/#define USE_SENSORS                              \/\/ Create sonoff-sensors with useful sensors enabled\r\n\/\/#define USE_KNX_NO_EMULATION                     \/\/ Create sonoff-knx with KNX but without Emulation\r\n\/\/#define BE_MINIMAL                               \/\/ Create sonoff-minimal as intermediate firmware for OTA-MAGIC\r\n\r\n\/*********************************************************************************************\r\n * No user configurable items below\r\n*********************************************************************************************\/\r\n\r\n#if defined(USE_MQTT_TLS) && defined(USE_WEBSERVER)\r\n  #error \"Select either USE_MQTT_TLS or USE_WEBSERVER as there is just not enough memory to play with\"\r\n#endif\r\n\r\n#endif  \/\/ _USER_CONFIG_H_<\/pre>\n
\"\"<\/a><\/p>\n
\n
Collez la compensation de filetage sur le culot de la lampe<\/h2>\n
Lorsque j'ai install\u00e9 cette lampe pour la premi\u00e8re fois, j'ai eu le probl\u00e8me que la base de l'ampoule, qui n'\u00e9tait pas tout \u00e0 fait plate, ne tenait pas correctement sur la base de la lampe. Pour compenser cette irr\u00e9gularit\u00e9, j'ai coll\u00e9 un anneau de compensation au pied de la lampe. Je l'ai ensuite int\u00e9gr\u00e9 dans la base de la lampe. Cependant, par souci d'exhaustivit\u00e9, il est inclus ici.<\/p>\n
\"\"<\/a>
Gros plan sur la base de l'ampoule l\u00e9g\u00e8rement in\u00e9gale.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan sur l'anneau d'\u00e9quilibrage.<\/figcaption><\/figure>\n
\"\"<\/a>
Avec la bague de compensation coll\u00e9e au culot de la lampe, le logement de l'ampoule tient maintenant debout\u2026<\/figcaption><\/figure>\n
\"\"<\/a>
...droit et droit.<\/figcaption><\/figure>\n
\"\"<\/a>
La meilleure fa\u00e7on de le faire est de fixer l'anneau de compensation avec de la colle chaude.<\/figcaption><\/figure>\n
\n
Combinez le bo\u00eetier de l'ampoule avec la base de la lampe<\/h2>\n
Maintenant, vous pouvez \u00e9galement connecter le bo\u00eetier de la lampe \u00e0 la base de la lampe.<\/p>\n
\"\"<\/a>
Maintenant, vous pouvez soigneusement placer le bo\u00eetier de l'ampoule sur la tige du culot de la lampe. Si tout convient, vous pouvez ensuite coller le bo\u00eetier de l'ampoule sur la base de la lampe avec de la colle chaude.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan sur la "petite" version.<\/figcaption><\/figure>\n
\"\"<\/a>
Gros plan sur la "grande" version.<\/figcaption><\/figure>\n
\"\"<\/a>
Comparaison de taille entre la "petite" et la "grande" version.<\/figcaption><\/figure>\n