{"id":2621,"date":"2019-02-27T18:49:10","date_gmt":"2019-02-27T17:49:10","guid":{"rendered":"https:\/\/www.nerdiy.de\/?p=2621"},"modified":"2021-12-18T17:49:36","modified_gmt":"2021-12-18T16:49:36","slug":"nodered-tasmota-building-an-instagram-icon-lamp","status":"publish","type":"post","link":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/","title":{"rendered":"HowTo: Node Red \/ Tasmota \u2013 Bouw een Instagram(*) Icon Lamp"},"content":{"rendered":"

In het artikel NodeRed\/Tasmota \u2013 Een Facebook-pictogramlamp bouwen<\/strong><\/em><\/a> Ik heb beschreven waarom een Facebook-lamp naar mijn mening een handig ding is als je betrouwbare informatie over Facebook-meldingen wilt krijgen.<\/p>\n

Helaas\/godzijdank is de online wereld van sociale media tegenwoordig niet meer alleen Facebook. Naast Whatsapp<\/a><\/strong><\/em>, Twitter wil ook op de hoogte worden gehouden van Instagram(*)-meldingen. Het heeft dus alleen maar zin om dit via een Instagram(*) lamp te laten doen.<\/p>\n

Hoe dit werkt en waar u op moet letten, leest u in het volgende artikel.<\/p>\n

(*)EEN KENNISGEVING<\/strong><\/em><\/a>: Instagram\u00ae<\/sup> en het Instagram-logo zijn handelsmerken van Instagram, LLC, geregistreerd in de Verenigde Staten en andere landen.<\/p>\n

\n

Veiligheidsinstructies <\/span><\/h2>\r\n

Ik weet dat de volgende opmerkingen altijd een beetje vervelend zijn en onnodig lijken. Helaas hebben veel mensen die "beter" wisten door onvoorzichtigheid ogen, vingers of andere dingen verloren of zichzelf verwond. Gegevensverlies is in vergelijking bijna te verwaarlozen, maar zelfs dit kan erg vervelend zijn. Neem daarom vijf minuten de tijd om de veiligheidsinstructies te lezen. Omdat zelfs het coolste project geen blessure of andere problemen waard is.<\/span>
https:\/\/www.nerdiy.de\/sicherheitshinweise\/<\/span><\/a><\/em><\/strong><\/p>\r\n

Affiliate links \/ reclame links<\/h2>\r\n

De hier vermelde links naar online winkels zijn zogenaamde affiliate-links. Als u op zo'n affiliate-link klikt en via deze link een aankoop doet, ontvangt Nerdiy.de een commissie van de betreffende onlineshop of aanbieder. De prijs verandert voor jou niet. Als u via deze links uw aankopen doet, steunt u Nerdiy.de om in de toekomst andere nuttige projecten aan te kunnen bieden. \ud83d\ude42\u00a0<\/em><\/p>\n

\n

Eisen<\/h2>\n

Handige artikelen:
\n<\/strong>Voordat u met dit artikel begint, moet u de basisprincipes van solderen hebben behandeld. Informatie hierover vind je in het volgende artikel.
\nElektronica - Mijn vriend de soldeerbout<\/a><\/em><\/strong><\/p>\n

Benodigd materiaal:<\/strong><\/p>\n

In de volgende lijst vindt u alle onderdelen die u nodig heeft om dit artikel te implementeren.<\/strong><\/p>\n

\n \n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n

Vereist gereedschap:<\/strong><\/p>\n

In de volgende lijst vindt u alle onderdelen die u nodig heeft om dit artikel te implementeren.<\/strong><\/p>\n

\n
\n \n \n \n \n \n \n \n <\/colgroup>\n <\/table>\n \n \n \n<\/div>\n\n
\n

Benodigde onderdelen verzamelen<\/h2>\n

Op de volgende foto zie je de onderdelen die nodig zijn om je eigen Instagram(*) lamp te bouwen.<\/p>\n

\"\"<\/a>
Je ziet de behuizing van de Instagram(*) lamp, het ESP8266 adapterbord (een WEMOS D1 Mini), twee WS2812B LED-strips met 26 of 9 LED's en ca. 15cm 3-draads kabel. De twee papieren stroken die later nodig zijn om de LED-strip af te dekken, zijn niet zichtbaar.<\/figcaption><\/figure>\n
\n

Print de benodigde 3D onderdelen<\/h2>\n

Download alle vereiste STL-bestanden: NodeRedTasmota \u2013 Een Instagram-pictogramlamp bouwen<\/a><\/strong><\/em><\/p>\n

Baseren: <\/strong><\/p>\n

Je kunt de 3D-weergave van het STL-bestand draaien door de muisknop ingedrukt te houden. Je kunt in- en uitzoomen met het muiswiel.<\/p>\n

\n

schakelschema<\/h2>\n

Hier vind je de schakelschema's die laten zien hoe de lamp in principe in elkaar zit.<\/p>\n

\"\"<\/a>
Normaal bedradingsschema.<\/figcaption><\/figure>\n
\"\"<\/a>
Fritzings visie.<\/figcaption><\/figure>\n
\n

Bereid de kleine LED-strip voor<\/h2>\n

Der kleinere der beiden LED-Streifen mit neun LED’s ist daf\u00fcr zust\u00e4ndig die „Kameralinse“ des Instagram(*)-Icons von innen zu beleuchten. Dazu muss zun\u00e4chst die Anschlussleitung vorbereitet werden.<\/p>\n

\"\"<\/a>
Knip hiervoor een ca. 9 cm lang stuk van de 3-aderige kabel af.<\/figcaption><\/figure>\n
\"\"<\/a>
Isoleer nu de uiteinden van de afzonderlijke kabels ca. 5 mm en...<\/figcaption><\/figure>\n
\"\"<\/a>
...tin ze met wat soldeer.<\/figcaption><\/figure>\n
\"\"<\/a>
Om de kabel later aan de eerste LED-strip te kunnen solderen, moet deze eerst worden voorbereid. Als je dat nog niet hebt gedaan, knip dan een strip van 9 LED's af. Dan moet je op zoek naar het uiteinde van de LED-strip waar een klein zwart pijltje staat dat van het uiteinde af wijst. Deze pijl geeft de stuursignaalingang voor de LED's aan.<\/figcaption><\/figure>\n
\"\"<\/a>
Hiertoe vertint u nu de contactpads van de ledstrip zoals op de afbeelding te zien is.<\/figcaption><\/figure>\n
\"\"<\/a>
Danach k\u00f6nnt Ihr die vorbereitete Leitung an den LED-Streifen anl\u00f6ten. Achtet dabei darauf, dass Ihr die rote Leitung f\u00fcr den Kontakt „+5V“, die gr\u00fcne Leitung f\u00fcr den Kontakt „Din“ und die wei\u00dfe Leitung f\u00fcr den Kontakt „GND“ verwendet. So f\u00e4llt es euch sp\u00e4ter leichter die Leitungen den korrekten Kontakten zuzuordnen.<\/figcaption><\/figure>\n
\"\"<\/a>
Close-up van de gesoldeerde draad.<\/figcaption><\/figure>\n
\n

Lijm LED-strips in de behuizing<\/h2>\n

Der vorbereitete LED-Streifen kann nun in die „Kameralinse“ Eurer Instagram(*)-Lampe eingeklebt werden.<\/p>\n

\"\"<\/a>
Om dit te doen, duwt u eerst de kabel van de LED-strip zoals afgebeeld...<\/figcaption><\/figure>\n
\"\"<\/a>
…durch das Loch in der „Kameralinse“.<\/figcaption><\/figure>\n
\"\"<\/a>
Bevor Ihr den LED-Streifen nun in die „Kameralinse“ fummelt, m\u00fcsst Ihr noch die Schutzfolie des Klebestreifens auf der R\u00fcckseite des LED-Streifens entfernen.<\/figcaption><\/figure>\n
\"\"<\/a>
Habt Ihr den LED-Streifen in die „Kameralinse“ gefummelt ist es nun an der Zeit zu pr\u00fcfen, ob dieser auch \u00fcberall mittig sitzt und…<\/figcaption><\/figure>\n
\"\"<\/a>
...past goed.<\/figcaption><\/figure>\n
\"\"<\/a>
Nadat je alles hebt gecontroleerd, kun je de LED-strip nu eindelijk vastzetten met wat hete lijm. Om dit te doen, bevestigt u eerst de uiteinden van de LED-strip - zoals afgebeeld - met wat hete lijm.<\/figcaption><\/figure>\n
\"\"<\/a>
Vervolgens kunt u de LED-strip op twee andere plaatsen bevestigen.<\/figcaption><\/figure>\n
\"\"<\/a>
Je kunt de lijn zien die nu uit de achterkant steekt...<\/figcaption><\/figure>\n
\"\"<\/a>
\u2026leid het gat eronder terug in de voet van je Instagram(*) lamp.<\/figcaption><\/figure>\n
\"\"<\/a>
Je kunt het daar voorlopig laten staan. Vervolgens wordt de grote LED-strip in het frame geplakt.<\/figcaption><\/figure>\n
\n

Bevestig de tweede ledstrip<\/h2>\n

Om de tweede LED-strip in het frame te kunnen plakken, moet deze \u2013 net als de eerste LED-strip \u2013 eerst voorbereid worden.<\/p>\n

\"\"<\/a>
Neem hiervoor het resterende ca. 6 cm lange stuk van uw 3-aderige kabel...<\/figcaption><\/figure>\n
\"\"<\/a>
...en isoleert de uiteinden ca. 5 mm.<\/figcaption><\/figure>\n
\"\"<\/a>
Deze gestripte uiteinden kun je nu ook vertinnen met een beetje soldeer.<\/figcaption><\/figure>\n
\"\"<\/a>
Net als bij de eerste ledstrip plaats je nu de tweede ledstrip (met 26 leds) voor je zodat de zwarte pijl weer van je af wijst.<\/figcaption><\/figure>\n
\"\"<\/a>
Hierbij vertin je de contactvlakken opnieuw met een beetje soldeer.<\/figcaption><\/figure>\n
\"\"<\/a>
An die verzinnten Kontaktpads lassen sich die verzinnten Leitungsenden nun leicht anl\u00f6ten. Achtet dabei wieder darauf, dass Ihr die rote Leitung f\u00fcr den Kontakt „+5V“, die gr\u00fcne Leitung f\u00fcr den Kontakt „Din“ und die wei\u00dfe Leitung f\u00fcr den Kontakt „GND“ verwendet. So f\u00e4llt es euch sp\u00e4ter leichter die Leitungen den korrekten Kontakten zuzuordnen.<\/figcaption><\/figure>\n
\"\"<\/a>
De voorbereide LED-strip kunt u vervolgens in het frame van uw Instagram(*) lamp plaatsen. Verwijder hiervoor de beschermfolie aan de achterkant van de LED-strip en plak deze \u2013 in eerste instantie tijdelijk \u2013 in het frame van je Instagram(*) lamp zoals afgebeeld.<\/figcaption><\/figure>\n
\"\"<\/a>
Close-up van de provisorisch gelijmde ledstrip.<\/figcaption><\/figure>\n
\"\"<\/a>
Close-up van de provisorisch gelijmde ledstrip.<\/figcaption><\/figure>\n
\"\"<\/a>
Nun k\u00f6nnt Ihr auch die Anschlussleitung des kurzen LED-Streifens mit dem langen LED-Streifen verbinden. Achtet dabei wieder darauf, dass Ihr die rote Leitung mit dem Kontakt „+5V“, die gr\u00fcne Leitung mit dem Kontakt „DO“ und die wei\u00dfe Leitung mit dem Kontakt „GND“ verbindet.<\/figcaption><\/figure>\n
\"\"<\/a>
Nu kun je deze LED-strips eindelijk vastzetten met wat hete lijm.<\/figcaption><\/figure>\n
\"\"<\/a>
Zorg ervoor dat u de ledstrip voldoende bevestigt, vooral in de hoeken van het frame.<\/figcaption><\/figure>\n
\"\"<\/a>
Close-up van LED-strip bevestigd met hete lijm.<\/figcaption><\/figure>\n
\n

Sluit het ESP8266-adapterbord aan op de ledstrips<\/h2>\n

Die LED-Streifen sind nun vorbereitet. Damit diese auch leuchten und generell gesteuert werden k\u00f6nnen ben\u00f6tigt Ihr noch ein ESP8266-Adapterboard um die LED-Streifen anzusteuern. In diesem Fall wird ein „WEMOS D1 Mini“ verwendet.<\/p>\n

Het wordt ook aanbevolen om op dit punt de LED van de ESP8266-adapterkaart uit te schakelen. Dit staat in het artikel ESP8266 \u2013 LED verwijderen\/uitschakelen<\/strong><\/em><\/a> beschreven.<\/p>\n

\"\"<\/a><\/p>\n

Bereid het ESP8266-adapterbord opnieuw voor door ...<\/p>\n

\"\"<\/a>
… die Kontakte „D4“. „G“ und „5V“ – wie abgebildet – mit etwas L\u00f6tzinn verzinnt.<\/figcaption><\/figure>\n
\"\"<\/a>
Nu kunt u het adapterbord op de LED-strip aansluiten door...<\/figcaption><\/figure>\n
\"\"<\/a>
…Ihr die Leitung wie abgebildet anl\u00f6tet. Dabei muss die rote Leitung wieder mit dem Kontakt „5V“, die gr\u00fcne Leitung mit dem Kontakt „GND“ und die wei\u00dfe Leitung mit dem Kontakt „D4“ des Adapterboards verbunden werden.<\/figcaption><\/figure>\n
\n

Bevestig de ESP8266-adapterkaart<\/h2>\n

Zodat het adapterbord nu ook onzichtbaar in de voet van de lamp verdwijnt, moet deze nog in de voet worden ondergebracht.<\/p>\n

\"\"<\/a>
Lijm het adapterbord op de voet van je Instagram(*) lamp zoals afgebeeld.<\/figcaption><\/figure>\n
\"\"<\/a>
Let er vooral op dat er geen kortsluitingen (verbindingen) ontstaan bij de contacten van de gesoldeerde kabel.<\/figcaption><\/figure>\n
\"\"<\/a>
Als je alle stappen tot nu toe hebt doorlopen, zou je Instagram(*) lamp er nu ongeveer zo uit moeten zien.<\/figcaption><\/figure>\n

\"\"<\/a><\/p>\n

\n

Lijm op de papieren schermen<\/h2>\n

Eure Instagram(*)-Lampe ist nun fast fertig. Das einzige was noch ein bisschen die Optik st\u00f6rt ist, dass man die „nackten“ LED-Streifen direkt sehen kann.<\/p>\n

Om dit een beetje te verbergen zijn er nu drie stroken papier gemaakt. Twee ervan met de afmetingen 30x210mm en \u00e9\u00e9n met de afmetingen 30x135mm. Deze worden vervolgens in het frame gelijmd. Deze papieren stroken zijn eigenlijk universele etiketten, wat betekent dat \u00e9\u00e9n zijde is voorzien van lijm zodat u de papieren stroken gemakkelijk in de lamp kunt plakken.<\/p>\n

\"\"<\/a>
De eenvoudigste manier om de papieren stroken te snijden is met een snijplotter. Als je daar op dit moment geen toegang toe hebt, zal een schaar of een scherp mes en liniaal ook werken. Zorg er dan voor dat je de ondergrond waarop je met het mes werkt niet beschadigt.<\/figcaption><\/figure>\n
\"\"<\/a>
Klebt dann zuerst den kurzen Papierstreifen in die „Kameralinse“ Eurer Instagram(*)-Lampe. Denkt daran vor dem Aufkleben die Schutzschicht auf der R\u00fcckseite zu entfernen. Achtet au\u00dferdem darauf, dass der Papierstreifen b\u00fcndig an der vorderen Kante anliegt und \u00fcberall ordentlich angedr\u00fcckt ist.<\/figcaption><\/figure>\n
\"\"<\/a>
Nahaufnahme des in die „Kameralinse“ Eurer Instagram(*)-Lampe eingeklebten Papierstreifens.<\/figcaption><\/figure>\n
\"\"<\/a>
Nu kunt u ook de resterende papierstroken in het frame lijmen. Het is het beste om met de bovenste te beginnen. Controleer nogmaals of de papieren strook overal goed is aangedrukt.<\/figcaption><\/figure>\n
\"\"<\/a>
De tweede strook papier wordt vervolgens op dezelfde manier aan het onderste deel van het frame gelijmd.<\/figcaption><\/figure>\n
\"\"<\/a>
Zodra je alle papieren stroken in je Instagram(*) lamp hebt geplakt, zou het geheel er ongeveer zo uit moeten zien.<\/figcaption><\/figure>\n

Voordat u begint, moet u nu de tips uit het artikel volgen Eektronik - Inbedrijfstelling van een nieuw circuit<\/a><\/strong><\/em> observeren.<\/p>\n

\n

Flash Tasmota-firmware<\/h2>\n

Nu is het tijd om de Tasmota firmware over te zetten naar de lamp. Om dit te doen, programmeer je de Tasmota firmware op het ESP9266 adapter board. Hoe je dit doet staat beschreven in het artikel Tasmota - Firmware flashen\u00a0 <\/strong><\/em><\/a>uitgelegd.<\/p>\n

Hieronder zie je een configuratie zoals ik heb gebruikt voor mijn Instagram(*) lamp. Uiteraard moet u nog steeds de toegangsgegevens voor uw WLAN en eventueel de toegangsgegevens voor uw MQTT-server configureren.<\/p>\n

\/*\r\n  user_config.h - user specific configuration for Sonoff-Tasmota\r\n\r\n  Copyright (C) 2018  Theo Arends\r\n\r\n  This program is free software: you can redistribute it and\/or modify\r\n  it under the terms of the GNU General Public License as published by\r\n  the Free Software Foundation, either version 3 of the License, or\r\n  (at your option) any later version.\r\n\r\n  This program is distributed in the hope that it will be useful,\r\n  but WITHOUT ANY WARRANTY; without even the implied warranty of\r\n  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\r\n  GNU General Public License for more details.\r\n\r\n  You should have received a copy of the GNU General Public License\r\n  along with this program.  If not, see <http:\/\/www.gnu.org\/licenses\/>.\r\n*\/\r\n\r\n#ifndef _USER_CONFIG_H_\r\n#define _USER_CONFIG_H_\r\n\r\n\/*********************************************************************************************\r\n * This file consists of TWO sections.\r\n *\r\n * SECTION 1:\r\n * The first section contains PARAMETERS overriding flash settings if define CFG_HOLDER is CHANGED.\r\n * All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.\r\n *   Corresponding MQTT\/Serial\/Console commands are shown in [brackets]\r\n *\r\n * SECTION 2:\r\n * The second section contains Enabled and Disabled FEATURES allowing different program size.\r\n *   Changes in this section do NOT need a change of define CFG_HOLDER.\r\n *\r\n * ATTENTION:\r\n * Users are advised to use the user_config_override.h file for most changes.\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CONFIG_OVERRIDE                      \/\/ Uncomment to use user_config_override.h file. See README.md\r\n\r\n\/*********************************************************************************************\r\n * SECTION 1\r\n * - After initial load any change here only take effect if CFG_HOLDER is changed too\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Master parameter control --------------------\r\n#define CFG_HOLDER             4617              \/\/ [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash\r\n\r\n\/\/ -- Project -------------------------------------\r\n#define PROJECT                \"InstagramLampe\"          \/\/ PROJECT is used as the default topic delimiter\r\n#define MODULE                 WEMOS      \/\/ [Module] Select default model from sonoff_template.h (Should not be changed)\r\n\r\n#define SAVE_DATA              1                 \/\/ [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)\r\n#define SAVE_STATE             1                 \/\/ [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)\r\n\r\n\/\/ -- Wifi ----------------------------------------\r\n#define WIFI_IP_ADDRESS        \"0.0.0.0\"         \/\/ [IpAddress1] Set to 0.0.0.0 for using DHCP or IP address\r\n#define WIFI_GATEWAY           \"192.168.0.1\"   \/\/ [IpAddress2] If not using DHCP set Gateway IP address\r\n#define WIFI_SUBNETMASK        \"255.255.255.0\"   \/\/ [IpAddress3] If not using DHCP set Network mask\r\n#define WIFI_DNS               \"192.168.0.1\"    \/\/ [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)\r\n\r\n#define STA_SSID1              \"\"                \/\/ [Ssid1] Wifi SSID\r\n#define STA_PASS1              \"\"                \/\/ [Password1] Wifi password\r\n#define STA_SSID2              \"\"                \/\/ [Ssid2] Optional alternate AP Wifi SSID\r\n#define STA_PASS2              \"\"                \/\/ [Password2] Optional alternate AP Wifi password\r\n#define WIFI_CONFIG_TOOL       WIFI_MANAGER         \/\/ [WifiConfig] Default tool if wifi fails to connect\r\n                                                 \/\/   (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)\r\n#define WIFI_CONFIG_NO_SSID    WIFI_WPSCONFIG    \/\/ Default tool if wifi fails to connect and no SSID is configured\r\n                                                 \/\/   (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)\r\n                                                 \/\/   *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***\r\n                                                 \/\/   *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***\r\n                                                 \/\/   *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***\r\n\r\n\/\/ -- Syslog --------------------------------------\r\n#define SYS_LOG_HOST           \"\"                \/\/ [LogHost] (Linux) syslog host\r\n#define SYS_LOG_PORT           514               \/\/ [LogPort] default syslog UDP port\r\n#define SYS_LOG_LEVEL          LOG_LEVEL_NONE    \/\/ [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define SERIAL_LOG_LEVEL       LOG_LEVEL_DEBUG    \/\/ [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n#define WEB_LOG_LEVEL          LOG_LEVEL_INFO    \/\/ [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)\r\n\r\n\/\/ -- Ota -----------------------------------------\r\n#define OTA_URL                \"http:\/\/sonoff.maddox.co.uk\/tasmota\/sonoff.bin\"  \/\/ [OtaUrl]\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_USE               1                 \/\/ [SetOption3] Select default MQTT use (0 = Off, 1 = On)\r\n\r\n#define MQTT_HOST              \"---\"                \/\/ [MqttHost]\r\n#define MQTT_FINGERPRINT1      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint1]\r\n#define MQTT_FINGERPRINT2      \"A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07\"  \/\/ [MqttFingerprint2]\r\n#define MQTT_PORT              1883              \/\/ [MqttPort] MQTT port (10123 on CloudMQTT)\r\n#define MQTT_USER              \"DVES_USER\"       \/\/ [MqttUser] MQTT user\r\n#define MQTT_PASS              \"DVES_PASS\"       \/\/ [MqttPassword] MQTT password\r\n\r\n#define MQTT_BUTTON_RETAIN     0                 \/\/ [ButtonRetain] Button may send retain flag (0 = off, 1 = on)\r\n#define MQTT_POWER_RETAIN      0                 \/\/ [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)\r\n#define MQTT_SWITCH_RETAIN     0                 \/\/ [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)\r\n\r\n#define MQTT_STATUS_OFF        \"OFF\"             \/\/ [StateText1] Command or Status result when turned off (needs to be a string like \"0\" or \"Off\")\r\n#define MQTT_STATUS_ON         \"ON\"              \/\/ [StateText2] Command or Status result when turned on (needs to be a string like \"1\" or \"On\")\r\n#define MQTT_CMND_TOGGLE       \"TOGGLE\"          \/\/ [StateText3] Command to send when toggling (needs to be a string like \"2\" or \"Toggle\")\r\n#define MQTT_CMND_HOLD         \"HOLD\"            \/\/ [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like \"HOLD\")\r\n\r\n\/\/ -- MQTT topics ---------------------------------\r\n  \/\/ Example \"tasmota\/bedroom\/%topic%\/%prefix%\/\" up to 80 characers\r\n#define MQTT_FULLTOPIC         \"%prefix%\/%topic%\/\" \/\/ [FullTopic] Subscribe and Publish full topic name - Legacy topic\r\n\r\n\/\/ %prefix% token options\r\n#define SUB_PREFIX             \"cmnd\"            \/\/ [Prefix1] Sonoff devices subscribe to %prefix%\/%topic% being SUB_PREFIX\/MQTT_TOPIC and SUB_PREFIX\/MQTT_GRPTOPIC\r\n#define PUB_PREFIX             \"stat\"            \/\/ [Prefix2] Sonoff devices publish to %prefix%\/%topic% being PUB_PREFIX\/MQTT_TOPIC\r\n#define PUB_PREFIX2            \"tele\"            \/\/ [Prefix3] Sonoff devices publish telemetry data to %prefix%\/%topic% being PUB_PREFIX2\/MQTT_TOPIC\/UPTIME, POWER and TIME\r\n                                                 \/\/   May be named the same as PUB_PREFIX\r\n\/\/ %topic% token options (also ButtonTopic and SwitchTopic)\r\n#define MQTT_TOPIC             PROJECT           \/\/ [Topic] (unique) MQTT device topic, set to 'PROJECT \"_%06X\"' for unique topic including device MAC address\r\n#define MQTT_GRPTOPIC          \"sonoffs\"         \/\/ [GroupTopic] MQTT Group topic\r\n#define MQTT_BUTTON_TOPIC      \"0\"               \/\/ [ButtonTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_BTN_%06X\"' for unique topic including device MAC address\r\n#define MQTT_SWITCH_TOPIC      \"0\"               \/\/ [SwitchTopic] MQTT button topic, \"0\" = same as MQTT_TOPIC, set to 'PROJECT \"_SW_%06X\"' for unique topic including device MAC address\r\n#define MQTT_CLIENT_ID         \"DVES_%06X\"       \/\/ [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address\r\n\r\n\/\/ -- MQTT - Telemetry ----------------------------\r\n#define TELE_PERIOD            300               \/\/ [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n#define DOMOTICZ_UPDATE_TIMER  0                 \/\/ [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds)\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n#define HOME_ASSISTANT_DISCOVERY_ENABLE   0      \/\/ [SetOption19] Home Assistant Discovery (0 = Disable, 1 = Enable)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define WEB_SERVER             2                 \/\/ [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)\r\n#define WEB_PASSWORD           \"\"                \/\/ [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)\r\n#define FRIENDLY_NAME          \"InstagramLampe\"          \/\/ [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa\r\n#define EMULATION              EMUL_NONE         \/\/ [Emulation] Select Belkin WeMo (single relay\/light) or Hue Bridge emulation (multi relay\/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)\r\n\r\n\/\/ -- Time - Up to three NTP servers in your region\r\n#define NTP_SERVER1            \"pool.ntp.org\"       \/\/ [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)\r\n#define NTP_SERVER2            \"nl.pool.ntp.org\"    \/\/ [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)\r\n#define NTP_SERVER3            \"0.nl.pool.ntp.org\"  \/\/ [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)\r\n\r\n\/\/ -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes\r\n#define TIME_DST_HEMISPHERE    North              \/\/ [TimeDst] Hemisphere (0 or North, 1 or South)\r\n#define TIME_DST_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_DST_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_DST_MONTH         Mar                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_DST_HOUR          2                  \/\/ Hour (0 to 23)\r\n#define TIME_DST_OFFSET        +120               \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Time - Start Standard Time and timezone offset from UTC in minutes\r\n#define TIME_STD_HEMISPHERE    North              \/\/ [TimeStd] Hemisphere (0 or North, 1 or South)\r\n#define TIME_STD_WEEK          Last               \/\/ Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)\r\n#define TIME_STD_DAY           Sun                \/\/ Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)\r\n#define TIME_STD_MONTH         Oct                \/\/ Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)\r\n#define TIME_STD_HOUR          3                  \/\/ Hour (0 to 23)\r\n#define TIME_STD_OFFSET        +60                \/\/ Offset from UTC in minutes (-780 to +780)\r\n\r\n\/\/ -- Location ------------------------------------\r\n#define LATITUDE               48.858360         \/\/ [Latitude] Your location to be used with sunrise and sunset\r\n#define LONGITUDE              2.294442          \/\/ [Longitude] Your location to be used with sunrise and sunset\r\n\r\n\/\/ -- Application ---------------------------------\r\n#define APP_TIMEZONE           1                 \/\/ [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST\/TIME_STD)\r\n#define APP_LEDSTATE           LED_POWER         \/\/ [LedState] Function of led\r\n                                                 \/\/   (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)\r\n#define APP_PULSETIME          0                 \/\/ [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)\r\n#define APP_POWERON_STATE      POWER_ALL_SAVED   \/\/ [PowerOnState] Power On Relay state\r\n                                                 \/\/   (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON)\r\n#define APP_BLINKTIME          10                \/\/ [BlinkTime] Time in 0.1 Sec to blink\/toggle power for relay 1\r\n#define APP_BLINKCOUNT         10                \/\/ [BlinkCount] Number of blinks (0 = 32000)\r\n#define APP_SLEEP              0                 \/\/ [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)\r\n\r\n#define KEY_DEBOUNCE_TIME      50                \/\/ [ButtonDebounce] Number of mSeconds button press debounce time\r\n#define KEY_HOLD_TIME          40                \/\/ [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message\r\n#define SWITCH_DEBOUNCE_TIME   50                \/\/ [SwitchDebounce] Number of mSeconds switch press debounce time\r\n#define SWITCH_MODE            TOGGLE            \/\/ [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE (the wall switch state)\r\n#define WS2812_LEDS            35                \/\/ [Pixels] Number of WS2812 LEDs to start with (max is 512)\r\n\r\n#define TEMP_CONVERSION        0                 \/\/ [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)\r\n#define TEMP_RESOLUTION        1                 \/\/ [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature\r\n#define HUMIDITY_RESOLUTION    1                 \/\/ [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity\r\n#define PRESSURE_RESOLUTION    1                 \/\/ [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure\r\n#define ENERGY_RESOLUTION      3                 \/\/ [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh\r\n\r\n\/*********************************************************************************************\r\n * END OF SECTION 1\r\n *\r\n * SECTION 2\r\n * - Enable a feature by removing both \/\/ in front of it\r\n * - Disable a feature by preceding it with \/\/\r\n*********************************************************************************************\/\r\n\r\n\/\/ -- Localization --------------------------------\r\n  \/\/ If non selected the default en-GB will be used\r\n\/\/#define MY_LANGUAGE            bg-BG           \/\/ Bulgarian in Bulgaria\r\n\/\/#define MY_LANGUAGE            cs-CZ           \/\/ Czech in Czech\r\n#define MY_LANGUAGE            de-DE           \/\/ German in Germany\r\n\/\/#define MY_LANGUAGE            el-GR           \/\/ Greek in Greece\r\n\/\/#define MY_LANGUAGE            en-GB           \/\/ English in Great Britain. Enabled by Default\r\n\/\/#define MY_LANGUAGE            es-AR           \/\/ Spanish in Argentina\r\n\/\/#define MY_LANGUAGE            fr-FR           \/\/ French in France\r\n\/\/#define MY_LANGUAGE            hu-HU           \/\/ Hungarian in Hungary\r\n\/\/#define MY_LANGUAGE            it-IT           \/\/ Italian in Italy\r\n\/\/#define MY_LANGUAGE            nl-NL           \/\/ Dutch in the Netherlands\r\n\/\/#define MY_LANGUAGE            pl-PL           \/\/ Polish in Poland\r\n\/\/#define MY_LANGUAGE            pt-BR           \/\/ Portuguese in Brazil\r\n\/\/#define MY_LANGUAGE            pt-PT           \/\/ Portuguese in Portugal\r\n\/\/#define MY_LANGUAGE            ru-RU           \/\/ Russian in Russia\r\n\/\/#define MY_LANGUAGE            tr-TR           \/\/ Turkish in Turkey\r\n\/\/#define MY_LANGUAGE            uk-UK           \/\/ Ukrainian in Ukrain\r\n\/\/#define MY_LANGUAGE            zh-CN           \/\/ Chinese (Simplified) in China\r\n\/\/#define MY_LANGUAGE            zh-TW           \/\/ Chinese (Traditional) in Taiwan\r\n\r\n\/\/ -- Wifi Config tools ---------------------------\r\n\/\/#define USE_WPS                                  \/\/ Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))\r\n\/\/#define USE_SMARTCONFIG                          \/\/ Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)\r\n\r\n\/\/ -- OTA -----------------------------------------\r\n#define USE_ARDUINO_OTA                          \/\/ Add optional support for Arduino OTA (+13k code)\r\n\r\n\/*-------------------------------------------------------------------------------------------*\r\n * Select ONE of possible three MQTT library types below\r\n*-------------------------------------------------------------------------------------------*\/\r\n  \/\/ Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.\r\n#define MQTT_LIBRARY_TYPE      MQTT_PUBSUBCLIENT   \/\/ Use PubSubClient library\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_TASMOTAMQTT    \/\/ Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only\r\n  \/\/ Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support\r\n\/\/#define MQTT_LIBRARY_TYPE      MQTT_ESPMQTTARDUINO \/\/ Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only\r\n\r\n\/\/ -- MQTT ----------------------------------------\r\n#define MQTT_TELE_RETAIN     0                   \/\/ Tele messages may send retain flag (0 = off, 1 = on)\r\n\r\n\/\/ -- MQTT - Domoticz -----------------------------\r\n\/\/#define USE_DOMOTICZ                             \/\/ Enable Domoticz (+6k code, +0.3k mem)\r\n  #define DOMOTICZ_IN_TOPIC    \"domoticz\/in\"     \/\/ Domoticz Input Topic\r\n  #define DOMOTICZ_OUT_TOPIC   \"domoticz\/out\"    \/\/ Domoticz Output Topic\r\n\r\n\/\/ -- MQTT - Home Assistant Discovery -------------\r\n\/\/#define USE_HOME_ASSISTANT                       \/\/ Enable Home Assistant Discovery Support (+2k code)\r\n  #define HOME_ASSISTANT_DISCOVERY_PREFIX \"homeassistant\"  \/\/ Home Assistant discovery prefix\r\n\r\n\/\/ -- MQTT - TLS ----------------------------------\r\n  \/\/ !!! TLS uses a LOT OF MEMORY so be careful to enable other options at the same time !!!\r\n\/\/#define USE_MQTT_TLS                             \/\/ Use TLS for MQTT connection (+53k code, +15k mem)\r\n\r\n\/\/ -- KNX IP Protocol -----------------------------\r\n\/\/#define USE_KNX                                  \/\/ Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)\r\n\/\/  #define USE_KNX_WEB_MENU                       \/\/ Enable KNX WEB MENU (+8.3k code, +144 mem)\r\n\r\n\/\/ -- HTTP ----------------------------------------\r\n#define USE_WEBSERVER                            \/\/ Enable web server and Wifi Manager (+66k code, +8k mem)\r\n  #define WEB_PORT             80                \/\/ Web server Port for User and Admin mode\r\n  #define WEB_USERNAME         \"admin\"           \/\/ Web server Admin mode user name\r\n  #define USE_EMULATION                          \/\/ Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)\r\n\r\n\/\/ -- mDNS ----------------------------------------\r\n#define USE_DISCOVERY                            \/\/ Enable mDNS for the following services (+8k code, +0.3k mem)\r\n  #define WEBSERVER_ADVERTISE                    \/\/ Provide access to webserver by name .local\/\r\n  #define MQTT_HOST_DISCOVERY                    \/\/ Find MQTT host server (overrides MQTT_HOST if found)\r\n\r\n\/\/ -- Time ----------------------------------------\r\n#define USE_TIMERS                               \/\/ Add support for up to 16 timers (+2k2 code)\r\n  #define USE_TIMERS_WEB                         \/\/ Add timer webpage support (+4k5 code)\r\n  #define USE_SUNRISE                            \/\/ Add support for Sunrise and sunset tools (+16k)\r\n    #define SUNRISE_DAWN_ANGLE DAWN_NORMAL       \/\/ Select desired Dawn Angle from (DAWN_NORMAL, DAWN_CIVIL, DAWN_NAUTIC, DAWN_ASTRONOMIC)\r\n\r\n\/\/ -- Rules ---------------------------------------\r\n#define USE_RULES                                \/\/ Add support for rules (+4k4 code)\r\n\r\n\/\/ -- Internal Analog input -----------------------\r\n\/\/#define USE_ADC_VCC                              \/\/ Display Vcc in Power status. Disable for use as Analog input on selected devices\r\n\r\n\/\/ -- One wire sensors ----------------------------\r\n                                                 \/\/ WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors\r\n\/\/#define USE_DS18x20                              \/\/ Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)\r\n\/\/#define USE_DS18x20_LEGACY                       \/\/ Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)\r\n\r\n\/\/ -- I2C sensors ---------------------------------\r\n#define USE_I2C                                  \/\/ I2C using library wire (+10k code, 0k2 mem, 124 iram)\r\n\r\n#ifdef USE_I2C\r\n\/\/  #define USE_SHT                                \/\/ Enable SHT1X sensor (+1k4 code)\r\n\/\/  #define USE_HTU                                \/\/ Enable HTU21\/SI7013\/SI7020\/SI7021 sensor (I2C address 0x40) (+1k5 code)\r\n    #define USE_BMP                                \/\/ Enable BMP085\/BMP180\/BMP280\/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)\r\n\/\/  #define USE_BME680                           \/\/ Enable support for BME680 sensor using Bosch BME680 library (+4k code)\r\n\/\/  #define USE_BH1750                             \/\/ Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)\r\n\/\/  #define USE_VEML6070                           \/\/ Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)\r\n\/\/  #define USE_ADS1115                            \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)\r\n\/\/  #define USE_ADS1115_I2CDEV                     \/\/ Enable ADS1115 16 bit A\/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)\r\n\/\/  #define USE_INA219                             \/\/ Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)\r\n\/\/  #define USE_SHT3X                              \/\/ Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)\r\n\/\/  #define USE_TSL2561                            \/\/ Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)\r\n\/\/  #define USE_MGS                                \/\/ Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)\r\n\/\/  #define MGS_SENSOR_ADDR    0x04              \/\/ Default Mutichannel Gas sensor i2c address\r\n\/\/  #define USE_SGP30                              \/\/ Enable SGP30 sensor (I2C address 0x58) (+1k1 code)\r\n\/\/  #define USE_SI1145                             \/\/ Enable SI1145\/46\/47 sensor (I2C address 0x60) (+1k code)\r\n\/\/  #define USE_LM75AD                             \/\/ Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)\r\n\/\/  #define USE_APDS9960                           \/\/ Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)\r\n\/\/  #define USE_MCP230xx                           \/\/ Enable MCP23008\/MCP23017 for GP INPUT ONLY (I2C addresses 0x20 - 0x27) providing command Sensor29 for configuration (+4k7 code)\r\n\/\/    #define USE_MCP230xx_OUTPUT                  \/\/ Enable MCP23008\/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)\r\n\/\/    #define USE_MCP230xx_DISPLAYOUTPUT           \/\/ Enable MCP23008\/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)\r\n  #define USE_MPR121                             \/\/ Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)\r\n\/\/  #define USE_CCS811                             \/\/ Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)\r\n\/\/  #define USE_MPU6050                            \/\/ Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)\r\n#endif  \/\/ USE_I2C\r\n\r\n\/\/ -- SPI sensors ---------------------------------\r\n\/\/#define USE_SPI                                  \/\/ SPI using library TasmotaTFT\r\n\r\n#ifdef USE_SPI\r\n\r\n#endif  \/\/ USE_SPI\r\n\r\n\/\/ -- Serial sensors ------------------------------\r\n#define USE_MHZ19                                \/\/ Add support for MH-Z19 CO2 sensor (+2k code)\r\n#define USE_SENSEAIR                             \/\/ Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)\r\n  #define CO2_LOW              800               \/\/ Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n  #define CO2_HIGH             1200              \/\/ Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)\r\n#define USE_PMS5003                              \/\/ Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)\r\n#define USE_NOVA_SDS                             \/\/ Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)\r\n#define USE_PZEM004T                             \/\/ Add support for PZEM004T Energy monitor (+2k code)\r\n#define USE_SERIAL_BRIDGE                        \/\/ Add support for software Serial Bridge (+0k8 code)\r\n\/\/#define USE_SDM120                               \/\/ Add support for Eastron SDM120-Modbus energy meter (+1k7 code)\r\n  #define SDM120_SPEED         9600              \/\/ SDM120-Modbus RS485 serial speed (default: 2400 baud)\r\n\/\/#define USE_SDM630                               \/\/ Add support for Eastron SDM630-Modbus energy meter (+2k code)\r\n  #define SDM630_SPEED         9600              \/\/ SDM630-Modbus RS485 serial speed (default: 9600 baud)\r\n\r\n\/\/ -- Low level interface devices -----------------\r\n\/\/#define USE_IR_REMOTE                            \/\/ Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)\r\n\/\/  #define USE_IR_HVAC                            \/\/ Support for HVAC system using IR (+2k code)\r\n\/\/  #define USE_IR_RECEIVE                         \/\/ Support for IR receiver (+5k5 code, 264 iram)\r\n\r\n#define USE_WS2812                               \/\/ WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by \/\/\r\n  #define USE_WS2812_CTYPE     NEO_GRB           \/\/ WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)\r\n\/\/  #define USE_WS2812_DMA                         \/\/ DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow\r\n\r\n\/\/#define USE_ARILUX_RF                            \/\/ Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))\r\n\r\n\/\/#define USE_SR04                                 \/\/ Add support for HC-SR04 ultrasonic devices (+1k code)\r\n\r\n\/\/#define USE_TM1638                               \/\/ Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)\r\n\r\n#define USE_RF_FLASH                             \/\/ Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)\r\n\r\n\/*********************************************************************************************\r\n * Debug features are only supported in development branch\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_DEBUG_DRIVER                         \/\/ Use xdrv_99_debug.ino providing commands CpuChk, CfgXor, CfgDump, CfgPeek and CfgPoke\r\n\r\n\/*********************************************************************************************\r\n * Optional firmware configurations\r\n * Select none or just one for optional features and sensors as configured in sonoff_post.h\r\n * See RELEASENOTES.md for selected features\r\n*********************************************************************************************\/\r\n\r\n\/\/#define USE_CLASSIC                              \/\/ Create sonoff-classic with initial configuration tools WPS, SmartConfig and WifiManager\r\n\/\/#define USE_SENSORS                              \/\/ Create sonoff-sensors with useful sensors enabled\r\n\/\/#define USE_KNX_NO_EMULATION                     \/\/ Create sonoff-knx with KNX but without Emulation\r\n\/\/#define BE_MINIMAL                               \/\/ Create sonoff-minimal as intermediate firmware for OTA-MAGIC\r\n\r\n\/*********************************************************************************************\r\n * No user configurable items below\r\n*********************************************************************************************\/\r\n\r\n#if defined(USE_MQTT_TLS) && defined(USE_WEBSERVER)\r\n  #error \"Select either USE_MQTT_TLS or USE_WEBSERVER as there is just not enough memory to play with\"\r\n#endif\r\n\r\n#endif  \/\/ _USER_CONFIG_H_<\/pre>\n
\n
Configureer Tasmota-firmware<\/h2>\n
Om ervoor te zorgen dat de vers geprogrammeerde maar nog niet geconfigureerde firmware van de lamp correct werkt, moet nu worden ingesteld waar de LED-strip is aangesloten op het ESP8266-adapterbord.<\/p>\n
\"\"<\/a>
Om dit te doen, voert u het IP-adres van uw Instagram(*)-lamp in de adresbalk van uw browser in en wacht u tot u wordt begroet door de Tasmota-firmware-startpagina. Hoe u het IP-adres van uw apparaten op het netwerk kunt achterhalen, vindt u in het artikel Toon\/ontdek het IP-adres van de apparaten in het netwerk<\/strong><\/em><\/a>.<\/figcaption><\/figure>\n
\"\"<\/a>
Dort klickt Ihr nun auf „Einstellungen“…<\/figcaption><\/figure>\n
\"\"<\/a>
…und auf „Ger\u00e4t konfigurieren“.<\/figcaption><\/figure>\n
\"\"<\/a>
In der Drop-Down Liste des GPIO02 bzw. „D4“ stellt Ihr nun „07 WS2812“ ein, was der Tasmota Firmware sagt, dass nun am GPIO02 ein WS2812 LED-Streifen angeschlossen ist.<\/figcaption><\/figure>\n
\"\"<\/a>
Habt Ihr die Konfiguration wie abgebildet eingestellt klickt Ihr auf „Speichern“.<\/figcaption><\/figure>\n
\"\"<\/a>
De firmware wordt dan opnieuw opgestart en zou na ongeveer een minuut weer beschikbaar moeten zijn.<\/figcaption><\/figure>\n
\"\"<\/a>
Na het opnieuw opstarten kun je de lamp vervolgens via de interface aan- en uitschakelen.<\/figcaption><\/figure>\n
\n
bediening van de lamp<\/h2>\n
Hoe je de lamp vervolgens kunt bedienen \u2013 om onder andere de juiste Instagram(*) kleuren in te stellen \u2013 wordt beschreven in het volgende artikel NodeRed \u2013 controle Instagram-lamp<\/strong><\/em><\/a>.<\/p>\n
\n
Als alles goed is gegaan, zou je Instagram(*) lamp er eindelijk zo uit moeten zien.<\/p>\n
\"\"<\/a><\/p>\n
\n
Veel plezier met het project<\/h2>\r\n
Ik hoop dat alles werkte zoals beschreven. Zo niet, of als je vragen of suggesties hebt, laat het me weten in de commentaren. Ik zal dit dan zo nodig aan het artikel toevoegen.
Idee\u00ebn voor nieuwe projecten zijn altijd welkom. \ud83d\ude42<\/p>\r\n
PS Veel van deze projecten - vooral de hardwareprojecten - kosten veel tijd en geld. Natuurlijk doe ik dit omdat ik het leuk vind, maar als je het cool vindt dat ik de informatie met je deel, dan zou ik blij zijn met een kleine donatie aan het koffiefonds. \ud83d\ude42<\/strong><\/p>\r\n
\"Koop<\/a>\u00a0 \u00a0 \u00a0 \u00a0   \"\"<\/p>","protected":false},"excerpt":{"rendered":"
In het artikel NodeRed\/Tasmota \u2013 Een Facebook-pictogramlamp bouwen, beschreef ik waarom ik een Facebook-lamp handig vind als je betrouwbaar ge\u00efnformeerd wilt worden over Facebook-meldingen. Helaas\/God [\u2026]<\/p>","protected":false},"author":1,"featured_media":3048,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[91,86,61,148,120],"tags":[124,89,114,131],"class_list":["post-2621","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-3d-druck","category-elektronik","category-smarthome","category-tagesprojekt5h","category-tasmota","tag-diy-lampe","tag-lampe","tag-nodered","tag-tasmota"],"yoast_head":"\nHowTo: Node Red \/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...<\/title>\n<meta name=\"description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HowTo: Node Red \/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"og:description\" content=\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/\" \/>\n<meta property=\"og:site_name\" content=\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/nerdiy.de\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/nerdiy.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-02-27T17:49:10+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-12-18T16:49:36+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"3024\" \/>\n\t<meta property=\"og:image:height\" content=\"4032\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Fab\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:site\" content=\"@nerdiyde\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Fab\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"27 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/\"},\"author\":{\"name\":\"Fab\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\"},\"headline\":\"HowTo: Node Red \\\/ Tasmota – Eine Instagram(*)-Icon-Lampe bauen\",\"datePublished\":\"2019-02-27T17:49:10+00:00\",\"dateModified\":\"2021-12-18T16:49:36+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/\"},\"wordCount\":2102,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1\",\"keywords\":[\"DIY-Lampe\",\"Lampe\",\"NodeRed\",\"Tasmota\"],\"articleSection\":[\"3D-Druck\",\"Elektronik\",\"SmartHome\",\"Tagesprojekt(<5h)\",\"Tasmota\"],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/\",\"name\":\"HowTo: Node Red \\\/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1\",\"datePublished\":\"2019-02-27T17:49:10+00:00\",\"dateModified\":\"2021-12-18T16:49:36+00:00\",\"description\":\"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#breadcrumb\"},\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2018\\\/11\\\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1\",\"width\":3024,\"height\":4032},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/nl\\\/nodered-tasmota-building-an-instagram-icon-lamp\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"HowTo: Node Red \\\/ Tasmota – Eine Instagram(*)-Icon-Lampe bauen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#website\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"name\":\"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...\",\"description\":\"Bei nerdiy.de dreht sich alles um Elektronik, Heimwerken, 3D-Druck, Smart Home und viele andere technische Themen.\",\"publisher\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#organization\",\"name\":\"Nerdiy.de\",\"url\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/nerdiy.de\\\/wp-content\\\/uploads\\\/2020\\\/04\\\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1\",\"width\":180,\"height\":180,\"caption\":\"Nerdiy.de\"},\"image\":{\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.pinterest.de\\\/nerdiyde\\\/\",\"https:\\\/\\\/www.youtube.com\\\/nerdiy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/nerdiy.de\\\/de_de\\\/#\\\/schema\\\/person\\\/f1579a71868adb0be60a74246d3e0908\",\"name\":\"Fab\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g\",\"caption\":\"Fab\"},\"sameAs\":[\"https:\\\/\\\/nerdiy.de\",\"https:\\\/\\\/www.facebook.com\\\/nerdiy.de\\\/\",\"https:\\\/\\\/www.instagram.com\\\/nerdiy.de\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/nerdiy-de\\\/\",\"http:\\\/\\\/www.pinterest.com\\\/nerdiyde\\\/\",\"https:\\\/\\\/x.com\\\/nerdiyde\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/Nerdiy\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"HowTo: Node Red \/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","description":"Lees een enorme verzameling gedetailleerde tutorials op Nerdiy.de over allerlei soorten software, hardware en algemene makeronderwerpen.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/","og_locale":"nl_NL","og_type":"article","og_title":"HowTo: Node Red \/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","og_description":"Read a huge collection of detailed Tutorials on Nerdiy.de about all kind of Software, Hardware and general maker topics.","og_url":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/","og_site_name":"nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","article_publisher":"https:\/\/www.facebook.com\/nerdiy.de","article_author":"https:\/\/www.facebook.com\/nerdiy.de\/","article_published_time":"2019-02-27T17:49:10+00:00","article_modified_time":"2021-12-18T16:49:36+00:00","og_image":[{"width":3024,"height":4032,"url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","type":"image\/jpeg"}],"author":"Fab","twitter_card":"summary_large_image","twitter_creator":"@nerdiyde","twitter_site":"@nerdiyde","twitter_misc":{"Written by":"Fab","Est. reading time":"27 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#article","isPartOf":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/"},"author":{"name":"Fab","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908"},"headline":"HowTo: Node Red \/ Tasmota – Eine Instagram(*)-Icon-Lampe bauen","datePublished":"2019-02-27T17:49:10+00:00","dateModified":"2021-12-18T16:49:36+00:00","mainEntityOfPage":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/"},"wordCount":2102,"commentCount":0,"publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"image":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","keywords":["DIY-Lampe","Lampe","NodeRed","Tasmota"],"articleSection":["3D-Druck","Elektronik","SmartHome","Tagesprojekt(<5h)","Tasmota"],"inLanguage":"nl-NL","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/","url":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/","name":"HowTo: Node Red \/ Tasmota - Eine Instagram(*)-Icon-Lampe bauen - nerdiy.de - DIY, Elektronik, 3D Druck und mehr...","isPartOf":{"@id":"https:\/\/nerdiy.de\/de_de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#primaryimage"},"image":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","datePublished":"2019-02-27T17:49:10+00:00","dateModified":"2021-12-18T16:49:36+00:00","description":"Lees een enorme verzameling gedetailleerde tutorials op Nerdiy.de over allerlei soorten software, hardware en algemene makeronderwerpen.","breadcrumb":{"@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#breadcrumb"},"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#primaryimage","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","width":3024,"height":4032},{"@type":"BreadcrumbList","@id":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-building-an-instagram-icon-lamp\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/nerdiy.de\/de_de\/"},{"@type":"ListItem","position":2,"name":"HowTo: Node Red \/ Tasmota – Eine Instagram(*)-Icon-Lampe bauen"}]},{"@type":"WebSite","@id":"https:\/\/nerdiy.de\/de_de\/#website","url":"https:\/\/nerdiy.de\/de_de\/","name":"nerdiy.de - DIY, elektronica, 3D printen en meer...","description":"Op nerdiy.de draait alles om elektronica, DIY, 3D-printen, smart home en vele andere technische onderwerpen.","publisher":{"@id":"https:\/\/nerdiy.de\/de_de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/nerdiy.de\/de_de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Organization","@id":"https:\/\/nerdiy.de\/de_de\/#organization","name":"Nerdiy.de","url":"https:\/\/nerdiy.de\/de_de\/","logo":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","contentUrl":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2020\/04\/www.nerdiy.de-v1.0final180x180-1.png?fit=180%2C180&ssl=1","width":180,"height":180,"caption":"Nerdiy.de"},"image":{"@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/nerdiy.de","https:\/\/x.com\/nerdiyde","https:\/\/www.instagram.com\/nerdiy.de\/","https:\/\/www.pinterest.de\/nerdiyde\/","https:\/\/www.youtube.com\/nerdiy"]},{"@type":"Person","@id":"https:\/\/nerdiy.de\/de_de\/#\/schema\/person\/f1579a71868adb0be60a74246d3e0908","name":"Fab","image":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cd8a2c5a20873f04ac46048f749a6f5335f6d9d3af744d9bb04f4052c44fca2?s=96&d=mm&r=g","caption":"Fab"},"sameAs":["https:\/\/nerdiy.de","https:\/\/www.facebook.com\/nerdiy.de\/","https:\/\/www.instagram.com\/nerdiy.de","https:\/\/www.linkedin.com\/company\/nerdiy-de\/","http:\/\/www.pinterest.com\/nerdiyde\/","https:\/\/x.com\/nerdiyde","https:\/\/www.youtube.com\/c\/Nerdiy"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-instagram-icon-lampe-bauen-20181109-103016.jpg?fit=3024%2C4032&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9GM3g-Gh","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":6273,"url":"https:\/\/nerdiy.de\/nl\/howto-nodered-facebook-lampe-driven\/","url_meta":{"origin":2621,"position":0},"title":"HowTo: Node Red \u2013 Controle Facebook(*) lamp","author":"Fab","date":"3. June 2019","format":false,"excerpt":"In dem Artikel NodeRed\/Tasmota - Eine Facebook(*)-Icon-Lampe bauen ist erkl\u00e4rt wie man sich eine eigene Facebook(*)-Lampe bauen kann. Ziel ist es diese sp\u00e4ter mit Eurem SmartHome zu verkn\u00fcpfen und beispielsweise leuchten zu lassen sobald neue Benachrichtigungen f\u00fcr Euch verf\u00fcgbar sind. Mit folgendem NodeCode k\u00f6nnt Ihr Eure selbstgebaute Facebook(*)-Lampe nun testen.\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/nl\/categorie\/avond-project2u\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-chrome-2019-06-03-15-29-36.png?fit=645%2C204&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":6230,"url":"https:\/\/nerdiy.de\/nl\/howto-nodered-instagram-lamp-control-2\/","url_meta":{"origin":2621,"position":1},"title":"HowTo: Node Red \u2013 Instagram(*) lamp bedienen","author":"Fab","date":"2. June 2019","format":false,"excerpt":"In dem Artikel NodeRed\/Tasmota - Eine Instagram(*)-Icon-Lampe bauen ist erkl\u00e4rt wie man sich eine eigene Instagram(*)-Lampe bauen kann. Ziel ist es diese sp\u00e4ter mit Eurem SmartHome zu verkn\u00fcpfen und beispielsweise leuchten zu lassen sobald neue Benachrichtigungen f\u00fcr Euch verf\u00fcgbar sind. Mit folgendem NodeCode k\u00f6nnt Ihr Eure selbstgebaute Instagram(*)-Lampe nun testen.\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/nl\/categorie\/avond-project2u\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-howto-nodered-instagram-lampe-ansteuern-chrome-2019-06-03-15-29-32.png?fit=553%2C298&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-howto-nodered-instagram-lampe-ansteuern-chrome-2019-06-03-15-29-32.png?fit=553%2C298&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-howto-nodered-instagram-lampe-ansteuern-chrome-2019-06-03-15-29-32.png?fit=553%2C298&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":2618,"url":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-build-a-facebook-icon-lamp\/","url_meta":{"origin":2621,"position":2},"title":"HowTo: Node Red \/ Tasmota \u2013 Bouw een Facebook(*) Icon Lamp","author":"Fab","date":"27. February 2019","format":false,"excerpt":"Nachdem ich vor kurzem einen Weg gefunden habe Benachrichtigungen von meinem Handy an mein SmartHome weiterzuleiten habe ich mir nun ein paar M\u00f6glichkeiten \u00fcberlegt wie man dies m\u00f6glich \"sinnvoll\" einsetzen kann. Zuerst hatte ich mit verschiedenen Blinkmustern der Lampen in meinem SmartHome experimentiert. Blinkt meine Mini-Lichterkette also drei Mal ist\u2026","rel":"","context":"In "3D-Druck"","block_context":{"text":"3D-Druck","link":"https:\/\/nerdiy.de\/nl\/categorie\/3d-printen\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-facebook-icon-lampe-bauen-20181109-102837.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2851,"url":"https:\/\/nerdiy.de\/nl\/nodered-tasmota-build-a-whatsapp-icon-lamp\/","url_meta":{"origin":2621,"position":3},"title":"HowTo: NodeRed \/ Tasmota \u2013 Bouw een WhatsApp(*) icoonlamp","author":"Fab","date":"27. February 2019","format":false,"excerpt":"In dem Artikel \"NodeRed\/Tasmota - Eine Facebook-Icon-Lampe bauen\" und \"NodeRed\/Tasmota - Eine Instagram-Icon-Lampe bauen\" habe ich beschrieben, warum diese Lampen recht n\u00fctzlich sein k\u00f6nnen, wenn Ihr auf dem laufenden \u00fcber Benachrichtigungen auf Euren Social-Media-Accounts bleiben wollt. Neben Facebook und Instagram bekommt Ihr aber bestimmt auch t\u00e4glich mehrere Benachrichtigungen bei WhatsApp(*).\u2026","rel":"","context":"In "3D-Druck"","block_context":{"text":"3D-Druck","link":"https:\/\/nerdiy.de\/nl\/categorie\/3d-printen\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-whatsapp-icon-lampe-bauen-20181109-104331.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-whatsapp-icon-lampe-bauen-20181109-104331.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-whatsapp-icon-lampe-bauen-20181109-104331.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-whatsapp-icon-lampe-bauen-20181109-104331.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2018\/11\/www.nerdiy.de-tasmota-eine-whatsapp-icon-lampe-bauen-20181109-104331.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2447,"url":"https:\/\/nerdiy.de\/nl\/bouw-je-eigen-opensource-smarthome\/","url_meta":{"origin":2621,"position":4},"title":"Bouw je eigen OpenSource SmartHome","author":"Fab","date":"28. February 2019","format":false,"excerpt":"Ich muss zugeben ich habe noch nicht die perfekte L\u00f6sung gefunden um alle SmartHome-relevanten Artikel \u00fcbersichtlich aufzulisten. Um bis dahin zumindest etwas \u00dcbersicht in die verf\u00fcgbaren SmartHome-Artikel zu bringen kommt hier die folgende Liste mit allen aktuell verf\u00fcgbaren und teilweise geplanten Artikeln. :) Allgemein\/Diverses NodeRed \u2013 Installation von NodeRed auf\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/nl\/categorie\/avond-project2u\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/03\/www.nerdiy.de-firefox-2019-03-07-21-44-54.png?fit=1200%2C616&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":6236,"url":"https:\/\/nerdiy.de\/nl\/howto-nodered-whatsapp-lamp-control-2\/","url_meta":{"origin":2621,"position":5},"title":"HowTo: Node Red \u2013 Bedien WhatsApp(*) lamp","author":"Fab","date":"2. June 2019","format":false,"excerpt":"In dem Artikel NodeRed\/Tasmota - Eine WhatsApp(*)-Icon-Lampe bauen ist erkl\u00e4rt wie man sich eine eigene WhatsApp(*)-Lampe bauen kann. Ziel ist es diese sp\u00e4ter mit Eurem SmartHome zu verkn\u00fcpfen und beispielsweise leuchten zu lassen sobald neue Benachrichtigungen f\u00fcr Euch verf\u00fcgbar sind. Mit folgendem NodeCode k\u00f6nnt Ihr Eure selbstgebaute WhatsApp(*)-Lampe nun testen.\u2026","rel":"","context":"In "Abendprojekt(<2h)"","block_context":{"text":"Abendprojekt(<2h)","link":"https:\/\/nerdiy.de\/nl\/categorie\/avond-project2u\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/nerdiy.de\/wp-content\/uploads\/2019\/06\/www.nerdiy.de-howto-nodered-whatsapp-lampe-ansteuern-chrome-2019-06-03-15-29-33.png?fit=523%2C243&ssl=1&resize=350%2C200","width":350,"height":200},"classes":[]}],"_links":{"self":[{"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/posts\/2621","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/comments?post=2621"}],"version-history":[{"count":0,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/posts\/2621\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/media\/3048"}],"wp:attachment":[{"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/media?parent=2621"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/categories?post=2621"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nerdiy.de\/nl\/wp-json\/wp\/v2\/tags?post=2621"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}