Zum Inhalt springen

Nerdiy.com on Instagram
Nerdiy.com on Facebook
Nerdiy.com on YouTube
Nerdiy.com on TikTok
Nerdiy.com on Patreon
Nerdiy.com on Pinterest
Nerdiy.com on Twitter
Nerdiy.com on GitHub
Nerdiy.com on Reddit
Reach Nerdiy.com by email

Nerdiy.com - Nerdy DIY HowTo's about electronics, 3D printing and more.

Nerdiy.de is all about electronics, DIY, 3D printing, smart home and many other technical topics.

Homepage
SmartHome
- All articles
- pxlBlck
- NodeRed
- ESPEasy
- FHEM
- FritzBox
- MagicMirror
- Tasmota
- Zigbee
  - cigbee2mqtt
DIY projects
- RaspberryPi
- Instagram
- 3D printing
  - All articles
  - pxlBlck
  - DIY lamp
  - OctoPrint
  - WinDIY
- Skills
- Code snippet
- Electronics
  - All articles
  - Arduino
  - DIY lamp
  - Tasmota
- Electrics
- Evening project(<2h)
- Day project(<5h)
- Weekend project (>12h)
Forum
Blog
About
Shop
Contact

Tag: NTP

HowTo: ESPEasy – Activate NTP time retrieval from the Internet

Posted on 12. December 2020 by Fab

Thanks to WiFi and thus (often) also Internet connection, an ESP8266 or ESP32 programmed with ESPEasy also has the possibility to display the time. For this to work, the call [...]

Weiterlesen

Evening project(<2h) / Arduino / Electronics / ESP Easy / FritzBox / SmartHome One comment

Search

Search for:

Subscribe to blog via email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

E-mail address

Support

If you want to support Nerdiy.com in continuing to offer useful projects, you can do so via one of the following buttons. 🙂

Display

Navigation

Homepage
SmartHome
- All articles
- pxlBlck
- NodeRed
- ESPEasy
- FHEM
- FritzBox
- MagicMirror
- Tasmota
- Zigbee
  - cigbee2mqtt
DIY projects
- RaspberryPi
- Instagram
- 3D printing
  - All articles
  - pxlBlck
  - DIY lamp
  - OctoPrint
  - WinDIY
- Skills
- Code snippet
- Electronics
  - All articles
  - Arduino
  - DIY lamp
  - Tasmota
- Electrics
- Evening project(<2h)
- Day project(<5h)
- Weekend project (>12h)
Forum
Blog
About
Shop
Contact

Login

Login

Username:

Password:

Stay logged in

Enter something special:

Register Lost password

Display

Instagram

If you want to keep up with all the ongoing developments, follow Nerdiy.com on Instagram.

nerdiy.com

🧑🔧 Full time nerd in a world with too many projects for too little time
❌ No reposting without my consent! ❌

🇪🇺 It's been a long time since I posted an "

🇪🇺 It's been a long time since I posted an "anotation picture". So:Here is a suitable picture of the circuit board installed in the #SolSpot. The four TSL2591 light sensors are installed on it, with which the brightness in the respective sensor element and thus the alignment can be measured. Next to each light sensor I also installed an SK6812 Side LED. This allows the sensor to carry out a simple functional test (for example at night) to ensure that the light sensors are still working correctly. 😎Many thanks to @pcbway for assistance with this project. 🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 It's been a criminally long time since I posted an "anotation picture". So: Here is a suitable picture of the circuit board installed in the #SolSpot. The four TSL2591 light sensors are installed on it, with which the brightness in the respective sensor element and thus the alignment can be measured. I have also installed an SK6812 side LED next to each light sensor. This allows the sensor to carry out a simple function test (at night, for example) to ensure that the light sensors are still working correctly. 😎Many thanks to @pcbway for the support with this project. 🙂You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #solspot #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #i2c #electricalengineering #iot #esphome #design

🇪🇺 Here comes a first insight into the (hope

🇪🇺 Here comes a first insight into the (hopefully) final iteration for the #SolSpot housing. 😂I have been optimizing the case over the last few weeks and especially made sure that it is really waterproof. In order to connect the individual components together in a waterproof manner, I use a sealing ring printed from #TPU. This is inserted into the grooves provided and clamped between the components. The watertightness of the front panel was particularly important to me because the sensor electronics are located directly behind it. What do you think of the concept so far? 🙂Thanks to @ruthex.de for supporting this project. I use their thread inserts in almost all places where I have to screw 3D printed components and it works much better than with cut threads. 😎You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #solar #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #esphome #electricalengineering #iot

(Ad/Anzeige)
🇪🇺 I recently showed how yo

(Ad/display)🇪🇺 I recently showed how you can build a very multifunctional digital picture frame from the 7" touch panel from @dfrobot_official a RaspberryPi and a 3D printed frame. The finished result now looks like this. I load the pictures that I want to display via an SMB share to the memory card of the Raspberry Pi. If an image does not fit completely into the frame, it is pushed across the display like the Kenburns effect. The images are changed every two minutes. In addition, the date and location of the photo are displayed after each image change (based on the GPS coordinates) is displayed. 🙂 Thanks to @dfrobot_official for supporting me with this project. 😍You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Recently I showed how to build a very multifunctional digital picture frame using the 7" touch panel from @dfrobot_official , a RaspberryPi and a 3D printed frame. The finished result looks like this. I load the pictures I want to display onto the memory card of the RaspberryPi via an SMB share. If a picture does not fit completely into the frame, it is moved across the display as with the Kenburns effect. The images are changed every two minutes. In addition, the date and location (based on the GPS coordinates) are displayed after each image change. 🙂You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #lipo #electricalengineering #iot #espeasy #design

Quick sneak peak of the planned "base" for #solspo

Quick sneak peak of the planned "base" for #solspot testing. Thanks to @pcbway to support me with your pcb service. 😍You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #solarpower #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #solartracker #electricalengineering #iot #espeasy #design

(Ad/Anzeige)
🇬🇧 In this photo you can se

(Ad/Display)🇬🇧 In this photo you can see a thermal image of the #SolSpot board. A major disadvantage of manually soldering the TSL2591 is that the correct orientation can only be seen from the position of the diode array on the front (a square shape). Unfortunately, the logic unit right next to it is also square. Long story short: I initially soldered all four TSL2591s in exactly the wrong way. So unsolder everything again with hot air and orient it correctly. I then monitored the cooling process of the circuit board with the Infiray P2Pro thermal imaging camera. A simple way to avoid burned fingers in the future. 😂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 In this photo you can see a thermal image of the SolSpot circuit board. A big disadvantage of manually soldering the TSL2591 is that the correct orientation can only be recognized by the position of the diode array on the front side (a square shape). Unfortunately, the logic unit right next to it is also square. Long story short: I initially soldered in all four TSL2591s the wrong way round. So I desoldered everything again with hot air and oriented it correctly. I then monitored the cooling process of the board with the Infiray P2Pro thermal imaging camera. A simple method to avoid burnt fingers in the future. 😂You can find more information and detailed instructions on my projects at NerDIY.de 🤓 You can find the latest information at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #thermalcamera #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #esphome #design @infiray_sonny @infiray_technology

(Ad/Anzeige)
🇬🇧 Many have already guessed it

(ad/display)🇬🇧 Many have already guessed it: I'm building a SolarTracker that I've dubbed "SolSpot". For this I designed the circuit board shown, which contains the well-known layout of four light sensors. For the light sensors I use a #TSL2591. These are read out via the I2C bus. Unfortunately, these do not have an adjustable I2C address. That's why I read the individual sensors via a TCA9548 I2C multiplexer. With this IC, an I2C bus can be multiplexed to eight different buses. In order to determine the further orientation of the sensor (and thus the direction of the sun), an ADXL345 acceleration sensor and a compass are also installed. Do you know the rest of the components? 😊 Thanks to @pcbway for supporting this project.You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Many have already guessed it: I'm building a solar tracker that I've now christened "SolSpot". I designed the circuit board shown here, which contains the familiar layout of four light sensors. I use a TSL2591 for the light sensors. These are read out via the I2C bus. Unfortunately, they do not have an adjustable I2C address. I therefore read out the individual sensors via a TCA9548 I2C multiplexer. With this IC, an I2C bus can be multiplexed to eight different buses. To determine the further orientation of the sensor (and thus the direction of the sun), an ADXL345 acceleration sensor and a compass are also installed. Do you know the other components? 😊Thanks to @pcbway for the support with this project.you can find more information and detailed instructions for my projects on NerDIY.de 🤓Up-to-date information is available on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #sensor #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #solspot #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #esphome #design

(Ad/Anzeige)
🇬🇧 So far I have monitored

(Ad/Display)🇬🇧 So far I have monitored the commissioning of a newly built board with a "UNI-T UTi120MS" thermal imaging camera. This has some disadvantages that I have only noticed since I started using the new "Infiray P2Pro" thermal imaging camera. What bothered me about the old camera was the unreliable app. It often crashes and you often have to plug and unplug the camera several times before it is recognized properly. Furthermore, it is not possible to film or photograph close-up objects (e.g. PCBs or electronic components). The camera just can't focus correctly at such close ranges. With the Infiray P2Pro, this problem is solved via a macro attachment, which is simply magnetically fixed on the camera. Last but not least, the Infiray P2Pro is also a bit smaller. Not a must have but definitely nice. 😊 You can find the link to it in my Amazon store. Thanks to Infiray for supporting me in my work with this tool. 😊You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #thermal #thermalcamera @infiray_sonny @infiray_technology

(Ad/Anzeige)
🇬🇧 Recently I also had the

(Ad/Display)🇬🇧 Recently I also had the opportunity to solder the SK6812 LEDs on the new #pxlDigit_24mini_single (yes, the name has gotten a bit complicated) PCBs. Currently I'm still waiting for suitable jumper cables to be able to build the whole thing on a breadboard. The individual LED modules can later either be plugged into a breadboard or connected using a JST cable. Therefore suitable JST sockets can be soldered on the back. The next step is the design of a suitable housing. Thanks to @pcbway for supporting me with this project. 😊You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Recently I also had the opportunity to solder the #SK6812 LEDs on the new #pxlDigit_24mini_single (yes, the name has become a bit complicated) PCBs. At the moment I am still waiting for suitable jumper cables to be able to build the whole thing on a breadboard. The individual LED modules can later either be plugged into a breadboard or connected via a JST cable. Suitable JST sockets can also be soldered onto the back. The next step is to design a suitable housing. Thanks to @pcbway for the support with this project. 😊You can find more information and detailed instructions on my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #led #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #esphome

(Ad/Anzeige)
🇬🇧 One of my future big pros

(ad/display)🇬🇧 One of my future big projects starts very small with a circuit board. For this I have developed a circuit board that is only 20x20mm in size, on which there is space for four brightness sensors, four LEDs, an I2C multiplexer, temperature sensor, acceleration sensor and a compass. Let's see if you already have an idea what I want to use this sensor board for. Many thanks to @pcbway for helping with this project.🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 One of my future big projects starts very small with a circuit board. I've developed a 20x20mm board with space for four brightness sensors, four LEDs, an I2C multiplexer, a temperature sensor, an acceleration sensor and a compass. Let's see if you have any idea what I want to use this sensor board for. Many thanks to @pcbway for the support with this project. 🙂You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #esphome #desin

Hey guys, I'm currently busy studying cornish copp

Hey guys, I'm currently busy studying cornish copper mine technology. Maybe thats useful for a future project. As soon as I'm back I will also continue the regular sized projects. 🤓#cornish #cornwall #dji #drone #dronephotography #dronelife #dronevideo #porthtowan #whealcoates #mine #dronestagram #droneoftheday #droneshots

🇬🇧 I built something small that moves. 😎

🇬🇧 I built something small that moves. 😎 Small sneak peak of an ongoing project. 🤓 What would you use it for?You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 I built something small that moves. 😎 Small sneak peek at an ongoing project. 🤓 What would you use it for? You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date info is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #ESPHome #electricalengineering #iot #arduino #servo

🇬🇧 In the meantime I have also solved one of

🇬🇧 In the meantime I have also solved one of the more blatant first world luxury problems in the new apartment. So far, "Staubi" (the hardest-working vacuum cleaner robot I know) has never fit under the living room couch. The feet were just too small so "Staubi" (you can roughly translate the name to "Dusty") always got stuck in front of the couch. To fix the problem, I decided to rebuild the couch feet and increase the couch ground clearance from 60mm to 120mm. The vacuum cleaner robot itself is actually only about 110mm high, but it still has some headroom. 🤓 For the feet I cut 60x40mm oak strips and glued them together with PU glue. The resulting 120x40mm oak strips were then mitred, glued together again and finally I rounded off the angled edge with a 5mm router. Then I only had to drill 24 20mm holes about 80mm deep into the feet (which took a really long time). Ultimately, you don't see the (quality) difference to the original feet. But I also have to admit that "I'll quickly build new higher feet for the couch" took a little longer than I initially thought. 😬😂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #firstworldproblems #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #ikea #electricalengineering #iot #roborock #vacuum

(Ad/Anzeige)
🇬🇧 For those who were wonde

(ad/display)🇬🇧 For those who were wondering which thermal imaging camera I used recently: It's the Infiray P2Pro. Really practical tool that is simply connected to your own smartphone via USB-C (or lightning connection). With the right app you get the full functionality of a thermal imaging camera. 😍 Also included is a small macro lens which is simply placed and fixed magnetically. Thanks to this it is also possible to examine small electronic components. 🙂 Many thanks to Infiray for this practical tool in my tool drawer.You can find more information and detailed instructions on my projects at NerDIY.de 🤓Up-to-date information can be found at @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 For those who were wondering which thermal imaging camera I used recently: It's the Infiray P2Pro. It's a really practical device that is simply connected to your smartphone via USB-C (or lightning connection). With the right app, you then get the full functionality of a thermal imaging camera. 😍 Also included is a small macro lens which is simply placed on top and magnetically fixed so it is also possible to examine small electronic components. 🙂 Many thanks to Infiray for this practical addition to my tool drawer.you can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #heat #electricalengineering #iot #pcb #thermalcamera @infiray_sonny

🇬🇧 It took a while to populate the #SoilSens

🇬🇧 It took a while to populate the #SoilSens circuit board. I think this is one of the most densely packed boards in a long time. In addition to the ESP32, a USB2Serial converter and the complete Lipo protection electronics including voltage conditioning are installed on it. There is also space for an I2C temperature, light, humidity, air pressure and UV radiation sensor. So almost a small weather station. 🙂I used two M3 SMT threads as electrodes for the soil conductance measurement. Let's see if that works. 🤓You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 The assembly of the #SoilSens board took a bit of time. I think this is one of the most densely packed boards in a long time. Besides the ESP32 there is a USB2Serial converter, the complete Lipo protection electronics including voltage conditioning. There is also space for an I2C temperature, light, humidity, air pressure and UV radiation sensor. So it's almost a small weather station. 🙂I used two M3 SMT threads as electrodes for the conductivity measurement. Let's see if that works. 🤓You can find more information and detailed instructions on my projects at NerDIY.de 🤓You can find the latest info at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #soil #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp32 #esp #project #solderingiron #makerlife #CAD #lipo #electricalengineering #iot #espeasy #design @pcbway @espressif_systems_official

(Ad/Anzeige)
🇬🇧 Together with the last d

(ad/display)🇬🇧 Together with the last delivery, @pcbway also sent me this small circuit board here. I want to use this to build a #pxlDigit_24mini prototype. So a 24 segment number display. But there is only one digit on a circuit board. The digits can then be connected to each other either via PinHeader or JST connectors. 😎You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Together with the last delivery, @pcbway also sent me this small circuit board here. I want to use it to build a #pxlDigit_24mini prototype. In other words, a 24-segment digit display. But there is only one digit on one board. The digits can then be connected to each other either via pin headers or JST connectors. 😎You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #led #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #pxlDigit #design

(Ad/Anzeige)
🇬🇧 In the comments on the r

(Ad/Anzeige)🇬🇧 In the comments on the reel yesterday, someone asked me if I wasn't worried that the housing would melt or warp due to the high temperatures of the built-in Raspberry Pi A. To avoid this, I have planned relatively large ventilation openings in the back. Warm air can be drawn off easily through the upper ones. Cold air is drawn in from below and thus cools the electronics inside. 🤓 You can see that this works quite well on the thermal image that I took with my new thermal imaging camera from @infiray_technology. To create a "worst case scenario" I started "stress-ng" on the RaspberryPi and used all four CPU cores to 100%. After about an hour I took the pictures shown. You can see that no part of the case gets hotter than 40°C despite full load. 🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #physic #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #thermal #electricalengineering #iot #thermalcamera #design @infiray_sonny

(Ad/Anzeige)
🇪🇺 Does anyone remember thi

(Ad/Display)🇪🇺 Does anyone remember this TFT display that the guys of @dfrobot_official made available to me for testing? 🙂 I built a small digital picture frame out of it. For this I installed a @raspberrypi A on the back (because it is so flat). I then integrated the whole unit into the 3D printed frame and screwed everything together using screws and @ruthex.de threaded inserts. 🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Does anyone else remember this TFT display that the people from @dfrobot_official gave me to test? 🙂 I used it to build a small digital picture frame. I installed a RaspberryPi A on the back (because it's so nice and flat). I then integrated the whole unit into the 3D printed frame and screwed everything together using screws and @ruthex.de threaded inserts. 🙂You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date info can be found at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #digitalart #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #lipo #electricalengineering #iot #raspberrypi #design

🇬🇧 In the last few days I've been working a

🇬🇧 In the last few days I've been working a bit on the cladding of my rain barrel. I wanted to cover the bare barrel with wooden slats. Of course I also found a reason to use my 3D printer here. 😬 So that the slats can be placed neatly around the diameter of the barrel, I printed small eyelets, which were screwed onto the slats. With these I then threaded the slats on a 5mm thick rubber band and "knotted" them around the barrel. How do you like the result? 🤓You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Over the last few days, I've been working a little on the lining of my rain barrel. I wanted to cover the bare barrel with wooden slats. Of course, I also found another reason to use my 3D printer. 😬 So that the slats can be placed neatly around the diameter of the barrel, I printed small eyelets that were screwed onto the slats. I then threaded the slats onto a 5mm thick rubber band and "knotted" them around the barrel. What do you think of the result? 🤓You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date info is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #gardening #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #garden #electricalengineering #iot #barrel #design

(advertisement/ad)
🇬🇧 New shipment from @pcbwa

(Advertisement/Ad)🇬🇧 New shipment from @pcbway. 😍 I want to use this PCB to build a wifi capable soil moisture sensor. Details will follow. 🤓You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 New shipment from @pcbway. 😍 I want to use this PCB to build a flower moisture sensor. Details to follow. 🤓 You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date info is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #esp32 #electricalengineering #iot #soil #design

🇬🇧 Here you can see how the #pxlDigit_PCB is

🇬🇧 Here you can see how the #pxlDigit_PCB is inserted into the 3D printed housing parts. How do you like the lighting? 🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Here you can see how the #pxlDigit_PCB is inserted into the 3D printed housing parts. What do you think of the illumination? 🙂You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #digit #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #retro #electricalengineering #iot #ESPHome #design

(advertisement/ad)
🇬🇧 @dfrobot_official sent m

(Advertisement/Ad)🇬🇧 @dfrobot_official sent me an Unihiker. A RaspberryPi alternative with all sorts of additional hardware and a fairly beginner-friendly programming interface. Unlike the RaspberryPi, the Unihiker already has a microphone, three-axis gyroscope/acceleration sensor, buzzer, light sensor and a 2.8" touch display built in. There are also three buttons and various JST sockets for the interfaces. Lots of potential for the next project that needs a little more power than that of an ESP. 😍You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 @dfrobot_official sent me a Unihiker. A RaspberryPi alternative with all kinds of additional hardware and a fairly beginner-friendly programming interface. Unlike the RaspberryPi, the Unihiker already has a microphone, three-axis gyroscope/acceleration sensor, buzzer, light sensor and a 2.8" touch display. There are also three buttons and various JST sockets for the interfaces. Plenty of potential for the next project that needs a little more power than an ESP. 😍You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date info is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #electricalengineering #iot #espeasy #design #embedded

(Ad/Anzeige)
🇬🇧 I know I've already sho

(Ad/Anzeige) 🇬🇧 I know I've already shown you the finished case for the #pxlDigit_24mini. Nevertheless, I wanted to give you a little insight into the details. Thanks to the multicolor print, the housing consists of only two parts. The front panel includes the housing frame, the light grid and the 0.4mm thick diffuser on the front. The finished circuit board is inserted into the front panel. Then the rear panel can be inserted and fixed with a screw. The rear panel is pushed under a tab on one side and screwed to the housing on the other side with an M2x6 screw. This means that only one screw is required to attach the circuit board and the rear panel. So that the back doesn't look so boring, I integrated the triangle design from the front. The USB-C port built into the circuit board is directly accessible through an opening. The clock can then be supplied with energy and also programmed/configured via this. Many thanks to @pcbway for your support at the board development. 😍You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #display #electricalengineering #iot #retro #design

🇬🇧 To connect the #pxlDigit boards I have in

🇬🇧 To connect the #pxlDigit boards I have integrated pads for JST connectors in addition to soldering pads. In this way, the respective circuit boards can be easily connected with connectors and several digits can simply be connected in series. 🙃You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 To connect the #pxlDigit circuit boards, I have integrated pads for JST connectors in addition to soldering pads. This way, the respective boards can be easily connected with connectors and some digits can be easily connected in series. 🙃You can find more information and detailed instructions for my projects at NerDIY.de 🤓Up-to-date information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #digit #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #retro #design @pcbway

(advertisement/ad)
🇬🇧 Over the past weeks I've as

(Advertisement/Ad)🇬🇧 Over the past weeks I've also (re)created the case for the #pxlBlck_multiPCB from scratch. The housing, the light grid and the diffuser are printed in one pass thanks to multicolor printing. I created two different designs for this. On one, you can see the black light grid on the front. With the other, it only shimmers slightly through the continuously printed diffuser. Which version do you like better? 🙂 I am also working on integrating the built-in I2S DAC and the built-in I2S microphone using #ESPHome and the new #VoiceAssistant feature of #HomeAssistant in such a way that the pxlBlck can be used as a VoiceAssistant client. I'm curious if and how this works. If so, it would be relatively easy to set up a locally running voiceAssistant. 🤓Thanks here again to @pcbwayfor provising me with PCBs for my project. 😍You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).#Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #electricalengineering #iot #esphome

Folge Nerdiy.de auf Instagram

YouTube

Nerdiy

Head of German Overengineering
- Full time nerd in a world with too many projects for too little time
- Detailed HowTo's on my blog www.NerDIY.de

Quick sneak peak of the planned "base" for #solspot testing. Thanks to @PCBWay to support me with your pcb service. 🙂You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).

More info soon on nerdiy.de

To connect the #pxlDigit boards I have integrated pads for JST connectors in addition to soldering pads. In this way, the respective circuit boards can be easily connected with connectors and several digits can simply be connected in series. 🙃You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 To connect the #pxlDigit boards I integrated solder pads and pads for JST connectors. So the respective boards can be easily connected with connectors and some digits can be easily connected in series. 🙃More info and detailed instructions for my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #digit #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #retro #design @pcbway

To connect the #pxlDigit boards I have integrated pads for JST connectors in addition to soldering pads. In this way, the respective circuit boards can be easily connected with connectors and several digits can simply be connected in series. 🙃You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 To connect the #pxlDigit boards I integrated solder pads and pads for JST connectors. So the respective boards can be easily connected with connectors and some digits can be easily connected in series. 🙃More info and detailed instructions for my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #digit #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #pcb #electricalengineering #iot #retro #design @pcbway

Here in update about the latest iteration for the #pxlDigit housing. In the first version, the PCB had to be glued to the housing after it was inserted. Not really sexy. Especially if you want to take the PCB out again. That's why I adjusted the dimensions so that the PCB can be clicked into the housing. It then holds without screws and glue. Do you like the solution? 🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Here in update about the last aiteration for the #pxlDigit case. The first version required the PCB to be glued to the case after insertion. Not really sexy. Especially if you want to take the PCB out again. That's why I adjusted the dimensions so that the PCB can be clicked into the case. It holds then completely without screwing and gluing. 😎 What do you think of the solution? 🙂 More info and detailed instructions on my projects can be found on NerDIY.de 🤓Aktuelle infos gibt es auf @Nerdiy.de (Instagram) oder @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #physique #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #homeassistant #electricalengineering #iot #esphome #design @pcbway

I also created a 3D printed housing for the #bedSens PCB. The circuit board can be easily inserted into it and is then clamped in the housing by closing it with the 3D printed cover. The connections for the force sensors and the #WS2812 LED RGB strip are then accessible from the outside. In addition, a recess for the (optionally mounted #BME280) is also integrated. This way the sensor is in the air and the measured values are falsified as little as possible by the housing. The PCB was kindly provided to me by @pcbway. 😍🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 For the #bedSens PCB I also made a matching case. The PCB can be easily inserted into it and is then clamped into the case by closing it with the 3D printed lid. The connectors for the force sensors and the #WS2812 LED RGB strip are then accessible from the outside. In addition, a recess for the #BME280 (optionally mounted on the board) is also integrated. This way, the sensor is easily accessible in the air and the measured values are distorted as little as possible by the housing. The PCB was kindly provided to me by @pcbway. 😍🙂 More info and detailed instructions about my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #HomeAssistant #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #electricalengineering #iot #esphome

My vacuum cleaner robot is currently sleeping under the cloakroom bench. So it is directly visible and always has free travel as soon as it is needed. But since he has already done so much diligent work, it is time to build him his own garage. As a first step, I designed a hinge which will later hold the garage door. The door opens in the same way as you know it from kitchen cabinets. The door swings parallel up and out of the frame.The hinge shown is a first test. 🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 My vacuum cleaner robot currently sleeps under the wardrobe bench. So he is directly visible and has always free ride as soon as he is needed. But now that he has done so much hard work, it's time to build him his own garage. As a first step I designed a hinge which will hold the garage door later. The door opens like you know it from kitchen cabinets. The shown hinge is a first test 🙂 More info and detailed instructions to my projects can be found on NerDIY.de 🤓Up-to-date info can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.en #Nerdiy #Nerdy #NRDY #caddesign #science #physics #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #lipo #electricalengineering #iot #industrialdesign #hinge

Many of you had already recognized it correctly: The indicated side project is a rotational platform which I want to use for the presentation in the future. The electronics are completely made up of different modules. A PWM module is used to set the speed of the rotation. The direction of rotation is reversed using a twin switch.The 6V for the geared motor are generated from a BuckBoost converter from a 18650 LiPo cell. The whole thing can then be charged via USB-C. Apart from the 3D printed parts, only a few ball bearings and screws are otherwise required 🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 Many of you had already recognized it correctly: The indicated sideproject is a turntable which I want to use for presentation in the future. The electronics is completely built from different modules. For the speed adjustment of the rotation a PWM module is used. The reversal of the rotation direction is done by a double switch. The 6V for the gear motor is generated by a BuckBoost converter from a 18650 LiPo cell. The whole thing can then be charged via USB-C. Apart from the 3D printed parts, only a few ball bearings and screws are needed 🙂 More info and detailed instructions on my projects can be found on NerDIY.de 🤓Current info can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #gear #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #physics #electricalengineering #iot #useful3dprinting #design

After the Staircase usermod from #WLED didn't work as it should have for my purpose, I combined what was necessary with my curiosity and finally worked my way into #Esphome. You can see the result in the video. The 192 LEDs long WS2815 LED strip is virtually divided into 12 segments (= steps). After touching one of the two touch sensors at the upper or lower end of the railing, the light is started with an animation and switched off again automatically after 15 seconds. Do you like the effect? 🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓 Link: https://nerdiy.de/links/If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).🇩🇪 After the Staircase usermod from #WLED didn't work as it should have for my purpose, I combined the necessary with my curiosity and finally dug into #Esphome. You can see the result in the video. The 192 LEDs long WS2815 LED strip is virtually divided into 12 segments (=stair steps). After touching one of the two touch sensors at the top or bottom of the railing, the light is started with an animation and automatically switched off again after 15 seconds. What do you think of the effect? 🙂 You can find more info and detailed instructions about my projects on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #lipo #electricalengineering #iot #espeasy #design

Small demo of the start process of the Clockception modules. After the master module (bottom left) has started, the other modules can also start. After the self-test (sensor check, etc.) was successful, the start animation is displayed. The master module is still based on the previous revision, which is why the LED animation is inverted there.You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).A small demo of the startup process of the Clockception modules. After the master module (below left) is started, the other modules can start too. After the self test (sensor check, etc.) was successful the start animation is displayed. The master module is still based on the last but one revision, that's why the LED animation is inverted there.More info and detailed instructions to my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #caddesign #science #lamp #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #clockception #electricalengineering #iot #espeasy #design @pcbway @espressif_systems_official

Here comes (finally) the solution to my little slider riddle. Often there is almost always a USB port within reach for charging the many devices you have in your household. But I often had the problem that a suitable cable was missing. That's why I developed this winding mechanism, which you can easily mount (for example) under a tabletop. The USB-C cable can then be easily pulled out when needed. When you no longer need it, it is neatly wound up again in the winding mechanism 🙂 You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).Here comes also (finally) the solution of my little slider puzzle. Meanwhile, you almost always have a USB port to charge the many devices within reach. But I often had the problem that a suitable cable is missing. That's why I developed this winding mechanism, which you can easily mount (for example) under a tabletop. The USB-C cable can then simply be pulled out when needed. When you don't need it anymore it will be neatly wound up again in the winding mechanism 🙂 More info and detailed instructions to my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.en #Nerdiy #Nerdy #NRDY #caddesign #science #mechanicalengineering #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #mechanics #electricalengineering #iot #espeasy #design

Tensioning the 5mm thick rubber band creates quite a pull. One latch mechanism didn't always hold up here. Therefore: double is better. 😎You can find more information and detailed instructions for my projects on NerDIY.de 🤓If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).Tensioning the 5mm thick rubber band creates quite a pull. A latch mechanism did not always hold here. Therefore: Double holds better. More info and detailed instructions on my projects can be found on NerDIY.de 🤓Actual infos can be found on @Nerdiy.de (Instagram) or @Nerdiy (YouTube). #Nerdiy.de #Nerdiy #Nerdy #NRDY #caddesign #science #physics #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #cablewinder #electricalengineering #iot #mechanicalengineering #design

This is a first glimpse on the Clockception Project I'm working on. Some info and PCB is available here https://www.pcbway.com/project/shareproject/Clockception_module_PCB_v1_7_c583581c.html more info on Nerdiy.de

I'm currently working on an additional animation for the #pxlBlck firmware. In the animation shown, the currently fed-in power of a solar system is shown on the display as a "gauge" animation including the numerical value (inW). As soon as no more energy is fed into the grid, the display shows the current grid consumption. 🙂⁣⁣You can find more information and detailed instructions for my projects on NerDIY.de 🤓⁣If you like what I'm doing follow me on @Nerdiy.de (Instagram) or @Nerdiy (YouTube).⁣⁣German: Ich working on an additional animation for the #pxlBlck firmware. In the animation shown, the currently fed-in power of a solar system is shown on the display as a "gauge" animation including a numerical value. As soon as no more energy is fed into the grid, the display shows the current grid purchase. 🙂⁣⁣You can find more information and detailed instructions on my projects at NerDIY.de 🤓⁣Current information is available at @Nerdiy.de (Instagram) or @Nerdiy (YouTube). ⁣⁣#Nerdiy.de #Nerdiy #Nerdy #caddesign #science #solar #DIY #3dprinting #soldering #industrialdesign #doityourself #electronics #tech #technology #engineering #3dprinter #maker #arduino #esp8266 #esp #project #solderingiron #makerlife #CAD #smasolar #electricalengineering #iot #espeasy #design

Latest posts

HowTo: MagicMirror - Build your own MagicMirror
HowTo/Test: Smart Home – Install and use a WeLock Touch41/Touch41 mini locking cylinder
HowTo: OpenMediaVault – Install PhotoPrism via Docker on the Raspberry Pi
HowTo: Integrate Zigbee – IKEA FYRTUR roller blind E1757 into Node Red via zigbee2mqtt
HowTo: OpenMediaVault - Set up Windows share or SMB server

Kategorien

Schlagwörter

3D printing (10) 433MHz (9) Actuators (18) Arduino (19) Arduino Nano (6) Automation (100) DIY lamp (6) ESP32 (30) ESP8266 (27) ESP8266 (6) ESPEasy (31) ESPEasy plugin (23) FHEM (5) FritzBox (10) Basics (4) Internet (7) IoT (8) Lamp (7) LED (5) Linux (12) Magic Mirror (7) MQTT (9) Network (6) NodeRed (78) OMV (8) OpenMediaVault (7) PCB (5) Pushbullet (5) PuTTy (6) pxlBlck (18) pxlBlckPlatform (8) Raspberry Pi (90) RasPi (106) Raspian (87) Sensors (14) Security (7) Smart (106) SmartHome (132) SSH (11) Tasmota (17) Clock (5) WinDIY (13) WS2812 (5) Zigbee (17) cigbee2mqtt (16)

Licenses

All works presented on Nerdiy.de are protected. Unless otherwise stated, they are subject to CC BY-NC-SA 4.0 or GNU AGPL v3.0. For more information, see:
https://nerdiy.de/lizenz/

Trademark

All third party trademarks are the property of respective owner.

Ideas & Suggestions

You have ideas, suggestions or other ideas for projects you would like to see on Nerdiy.de? Then inform us under www.nerdiy.de/kontakt/

Last comments

Fab zu HowTo: Node Red / FritzBox – Anwesenheitserkennung mit der FritzBox
bert vrieling zu HowTo: Node Red / FritzBox – Anwesenheitserkennung mit der FritzBox
Peter zu HowTo: Node Red – SMA Sunny Home Manager Daten auslesen
Fab zu HowTo: Node Red – SMA Sunny Home Manager Daten auslesen
Thomas zu HowTo: Node Red – SMA Sunny Home Manager Daten auslesen

Safety instructions
Contact
About
Imprint
License
Privacy
Sitemap

English

Deutsch

Deutsch

English

Français

Español

Nederlands

Lade Kommentare …

Verfasse einen Kommentar …

E-Mail (Erforderlich)

Name (Erforderlich)

Website