The IKEA FYRTUR roller blind is a very easy way to retrofit your windows with an easily controllable roller blind. Thanks to the Zigbee connection, you can then do this for all possible scenarios […]
Weiterlesen
Nerdiy.com - Nerdy DIY HowTo's about electronic, 3D-printing and more.
Nerdiy.de is about electronics, DIY, 3D printing, smart home and a lot of other technical topics.
The IKEA FYRTUR roller blind is a very easy way to retrofit your windows with an easily controllable roller blind. Thanks to the Zigbee connection, you can then do this for all possible scenarios […]
WeiterlesenThe TRADFRI plug is a simple way to switch existing consumers such as lamps via your smart home system via Zigbee The consumer can be switched on and off. At […]
WeiterlesenIn the article Zigbee – Preparing a Sonoff zigbee 3.0 USB Dongle Plus for zigbee2mqtt, I described how to write the firmware for zigbee2mqtt to a Zigbee stick from Sonoff. […]
WeiterlesenThe Ikea SYMFONISK E1744 remote control is actually intended to control the SYMFONISK WiFi speaker from Ikea. This can then be used to control the volume or change the track. […]
WeiterlesenThe IKEA STYRBAR button is slightly larger than the little brother of the Ikea TRADFRI E1743 button. But it also offers a few more functions and - due to the two [...]
WeiterlesenIn the article on the Sonoff SNZB-03 motion detector and Ikea TRADFRI motion detector, I mentioned before that a smart home can also be expanded into a (limited) alarm system. You can […]
WeiterlesenIn the article about the Sonoff SNZB-03 motion detector, I already described how you can use a motion detector to further automate your own SmartHome. Not only lights […]
WeiterlesenIn a large part of my smart home I use the Ikea TRADFRI E1743 buttons. These can be used to conveniently switch up to four devices on and off. Recently I […]
WeiterlesenThe IKEA TRADFRI shortcut button E1812 is the little brother of the Ikea TRADFRI E1743 button. Both are identical in size. The only differences with the shortcut button are that this […]
WeiterlesenI stumbled across the TuYa TS0201 temperature and humidity sensor while looking for a simple humidity sensor. Actually, I was looking for a simple humidity sensor with a display […]
WeiterlesenI think a smart home is always really practical when it relieves work or makes life more pleasant. Admittedly, the possibilities are not huge in this regard. But who ever […]
WeiterlesenThe IKEA TRADFRI button E1743 is one of the most used buttons in my SmartHome. It is very cheap at (currently) 6 euros per piece and at the same time the quality is very good […]
WeiterlesenIn order for you to be able to use Zigbee devices for your SmartHome, they must of course first be connected to your Zigbee network. This can be implemented in different ways. The easiest way new devices […]
WeiterlesenTo control your SmartHome with the help of zigbee2mqtt you need a Zigbee adapter so that you can also connect Zigbee sensors or actuators. This is the interface between the […]
WeiterlesenI've been using zigbee2mqtt for quite a while to integrate Zigbee sensors and actuators into my SmartHome. For a few years I have had one on the CC2530 or CC2531 IC […]
WeiterlesenInitially, Zigbee2mqtt could only be configured and controlled via the configuration file or access to the MQTT server. In the meantime, however, there is a very useful extension for zigbee2mqtt […]
Weiterlesen