EspEasy and Node Red each offer a number of options for automation. You get even more options if you combine both systems. In the article ESPEasy – Execute commands and […]
Read more
Category: ESP Easy
In the category ESP Easy you will find all articles that deal with the installation, configuration and operation of ESP Easy.
HowTo: pxlBlck – Build the pxlDigit_clock using the pxlDigit_PCB
I got the idea for the pxlDigit_PCB while building the pxlDigit (article here: https://nerdiy.de/howto-elektronik-seven-segment-digit-pxldigit-aus-ws2812-leds-bauen/). There the pxlDigit is made up of individual WS2812 LED segments. To do this, the LEDs […]
Read more
HowTo: Anemosens – Build a 3D printed wind sensor / anemometer
To be honest, the idea of a 3D printable wind sensor (in technical jargon “anemometer”) has been floating around in my head for a long time. Initially I could have […]
Read more
HowTo: ESPEasy – Setup time synchronization with the DS3231 / DS3232 RTC
Thanks to the NTP server, ESPEasy is able to call up the time via the WiFi connection. This option is very easy to set up and is described, for example, […]
Read more
HowTo: PCB – Assemble the ButtonBoard PCB V1.2
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always been looking for a universal and easy-to-program remote control for the […]
Read more
HowTo: PCB – Assembly of the Anemosens_MCU PCB
With the Aenmosens_MCU board it is possible to use Anemosens as a stand-alone anemometer, which can be used for long-term observations in remote areas (hence the microSD card slot) or […]
Read more
HowTo: PCB – Assemble the Anemosens sensor PCB
The Anemosens sensor PCB is the basis for the sensor assembly of Anemosens, a 3D printed anemometer that I developed for the second version of WinDIY. For this purpose, an […]
Read more
HowTo: PCB – Assembly of the pxlDigit_PCB
The idea for the pxlDigit_PCB came to me while building the first version of the pxlDigit (article here: https://nerdiy.de/en/howto-elektronik-sieben-segment-ziffer-pxldigit-aus-ws2812-leds-bauen/). The pxlDigit is built up from individual WS2812 LED segments. To […]
Read more
HowTo: PCB – pxlBlck_multiPCB
One of my past PCB projects is the “pxlBlck_multiPCB”. As the name suggests, this board is the heart of several future pxlBlck variants. So far I have used the Wemos […]
Read more
News: June 2021 – My projects for the HackadayPrize 2021
A few days ago the Hackaday Prize 2021 was announced. It became clear to me relatively quickly that I would like to try to submit a few of my projects […]
Read more
HowTo: pxlBlck – Build your own pxlBlck_CassetteLamp
MP3 players, smartphones and USB sticks with 128GB and more memory are now part of everyday life. Storing and transporting music has therefore never been easier. About 30 years ago […]
Read more
HowTo: ESPEasy – Connect the APDS-9960 gesture sensor to the ESP8266 / ESP32 and read its values
The APDS-9960 is a sensor that can be connected to a microcontroller such as the ESP8266 via the I2C bus. With the help of the sensor it is possible to […]
Read more
HowTo: ESPEasy – Set up password protection, save and restore configurations
I am not sure whether ESPs can really be abused to set up a botnet. Either way, you shouldn’t neglect the issue of security, even with the small ESPEasy devices. […]
Read more
HowTo: ESPEasy – Connect VL53L0X / VL53L1X distance sensor to the ESP8266 / ESP32 and read its data
The VL53L0x or its sister / brother, the VL53L1X is a very precise and relatively inexpensive laser distance sensor. With this, distances can be measured almost at millimeter-accuracy. In one […]
Read more
HowTo: ESPEasy – Connect the BME280 / BMP280 to the ESP8266 and read its data
The BME280 is one of the sensors that I use in almost all of my projects. With this sensor one can not only measure the temperature. The air humidity and […]
Read more
HowTo: ESPEasy – Configure MQTT server on the ESP8266 and subscribe to topics
ESPEasy can read out a large number of different sensors and / or control actuators (see also ESPEasy – Sensors & Actuators). With the help of the “Rules” it is […]
Read more
HowTo: 3D printing – Build a servo-controlled 125mm butterfly valve
I recently built an extraction system for my soldering station and the chamber of my 3D printer. The built extraction system has two connections. One of them sucks the air […]
Read more
HowTo: ESPEasy – Connect a rotary encoder to the ESP8266 and evaluate it
Especially if your own circuit has a display to show values, the next step is often to connect an interface option. You can connect buttons or switches. A relatively cool […]
Read more
HowTo: ESPEasy – Connect the PCA9685 PWM port extension to the ESP8266
The PCA9685 is quite a practical IC. This is connected to the microcontroller (e.g. ESP8266) via I2C and can then control up to 16 individual PWM channels. You can control […]
Read more
HowTo: ESPEasy – Connect an LDR to the ESP8266 and read its value
There are some situations in which connecting an LDR to an ESP makes sense. In this way, the brightness in a room can be measured relatively easily and for little […]
Read more
HowTo: pxlBlck – Display relative values as a BarGraph
I started with the documentation of the pxlBlcks (which I had been postponed for a too long time) in November 2020 after Hackaday.com had announced the “GoodBye 2020” challenge. (More […]
Read more
HowTo: pxlBlck – Build your own pxlBlck_RingClock
The pxlBlck_RingClock is very similar to the pxlBlck_SlotClock. It is also built using a 1 × 60 LED matrix and can display the time according to the same scheme as […]
Read more
HowTo: pxlBlck – Build your own pxlBlck_8x8
The pxlBlck_8x8 was one of the first members of the pxlBlck family. Thanks to the few parts and the prefabricated WS2812 8×8 LED matrix, it is set up fairly quickly […]
Read more
HowTo: pxlBlck – Build your own pxlBlck_Pot
The idea for the pxlBlck_Pot is heavily inspired by a design that Lukas (@i_am_lukas) had created. He agreed that I can use his basic design. Thanks again for that. 🙂 […]
Read more
HowTo: pxlBlck – Build your own pxlBlck_SlotClock
The pxlBlck_SlotClock consists of a 1×60 LED matrix. It can display the time in the same way as an analog clock. The colors of the individual hands can be adjusted. […]
Read more
HowTo: pxlBlck – Design icons, transfer them to the pxlBlck and display them
I started developing the pxlBlcks because I was looking for a way to stay informed about events in the SmartHome. There are now two options integrated into the pxlBlck plug-in. […]
Read more
HowTo: pxlBlck – Install and configure the pxlBlck plugin
The pxlBlck plugin for the ESPEasy framework is the “software counterpart” to the pxlBlck platforms. With the plugin you can easily control the built-in LED matrices and with the help […]
Read more
HowTo: pxlBlck – Commands to configure the pxlBlck
The pxlBlck plugin and the functions of your pxlBlck can be configured in two different ways. One possibility is to configure most of the functions via the plugin’s web menu. […]
Read more
HowTo: pxlBlck – Configure and display animations
With the pxlBlck you can be informed about events in different ways. One of these possibilities is to be able to display previously set icons. Unfortunately, this option only works […]
Read more
HowTo: pxlBlck – Configure watch faces and screensavers
The adjustable dials differ from the type of LED matrix used. Unfortunately, this is the case because different LED-matrix sizes allow or do not allow different dials and screensavers. In […]
Read more