The FRITZ!Box is not only a very good router for the home network. Equipped with the right Smart Home accessories, it can also become the Smart Home center of your house […]
Weiterlesen
Tag: FritzBox
HowTo: Node Red - Read out the temperature of the FRITZ! DECT Repeater 100
The FRITZ! I recently bought a DECT repeater to improve the range of my DECT phones. Unfortunately, my Fritz Box has to be in the basement, because […]
Weiterlesen
HowTo: Fritz Box - Find out the AIN of your SmartHome device
SmartHome devices that are compatible with the FRITZ!Box are addressed via an AIN. This AIN is a unique identification number that is assigned to the respective device. For example, if you use […]
Weiterlesen
HowTo: NodeRed - Control FRITZ!DECT 500 RGB lamp with the help of NodeRed and FritzBox
Recently I had already tested the DECT radiator thermostat for the FritzBox and integrated it into my NodeRed installation. Therefore, I was of course curious how the FRITZ! DECT 500 RGB [...]
Weiterlesen
HowTo: Node Red – Control the FritzBox radiator thermostat from Node Red
I recently ordered one of the DECT radiator thermostats for the FritzBox out of curiosity. As usual with the Fritz products, installation and commissioning was super easy. For attachment and setup [...]
Weiterlesen
HowTo: Node Red - Restarting the FritzBox from the dashboard
It doesn't happen often, but sometimes a reboot of the FritzBox helps to fix problems in the network or with the internet connection. To restart the FritzBox there are [...]
Weiterlesen
HowTo: FritzBox – Fehler “TypeError: Cannot read property ‘actions’ of ‘undefined'” in der “node-red-contrib-fritz”-Node beheben
Seit geraumer Zeit habe ich bereits das Problem (gehabt), dass meine “node-red-contrib-fritz”-Node keine Verbindung zu meiner FritzBox herstellen kann. Verändert hatte sich an der gesamten Konfiguration eigentlich nichts. Nichts außer […]
Weiterlesen
HowTo: Node Red / FritzBox – Display caller list in the dashboard
In addition to caller ID, you can also display the caller log of the Fritzbox in NodeRed. How to do this is explained in the following article. Prerequisites Helpful articles:To apply this configuration [...]
Weiterlesen
HowTo: Node Red / FritzBox – presence detection with the FritzBox
An important event that your SmartHome should be able to react to is the presence status of the residents. For example, you can turn off lamps when you are absent or turn on radiators when you are present.
Weiterlesen
HowTo: Node Red / FritzBox – Show call notification
If you have a FritzBox in your home in addition to a RaspberryPi with NodeRed, the following article could be of interest to you. This explains how you […]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands