ICY BOX 3.5" hard disk decoupler - 3D printable - STL files

ICY BOX 3.5″ hard disk decoupler - 3D printable - STL files

7,99 €

No VAT statement, as small business owner according to §19 (1) UStG.

Category:

Description

With the ICY BOX hard disk decoupler, an ICY BOX hard disk enclosure can be fixed in such a way that the vibrations generated during operation of the hard disk are not transferred to the enclosure.

The ICY BOX hard disk decoupler consists of an outer frame and a hard disk holder. The ICY BOX 3.5″ hard disk enclosure is inserted into the hard disk holder and the unit consisting of ICY BOX 3.5″ hard disk enclosure and hard disk holder can then be hooked into the outer frame.

Optionally, two 60mm fans can be mounted on the top for additional cooling of the hard disk.

Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project. This offer contains the STL files you need to print the 3D printable components for the ICY BOX 3.5″ hard disk decoupler required.

  • You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
  • Observe the safety instructions linked below during assembly and use: Click here

Additional components are required to build the complete project. A complete list of the required parts can be found here

Required tool:

Number Link
1x Screwdriver set  Buy at Amazon
1x Soldering iron  Buy at Amazon
1x Prusa 3D printer

Material required

Number Link
1x 3D printing FIlament PETG  Buy at Amazon
16x M3 thread insert  Buy at Amazon
1x (required rope length: 1x 55cm and 2x 70cm) 5mm rubber cord   Buy at Amazon
4x M2 thread insert  Buy at Amazon
4x  M3x25 countersunk screw  Buy at Amazon
8x M2x20 countersunk screw  Buy at Amazon
1x (per terminal) ICY BOX external 3.5 inch enclosure for hard disks  Buy at Amazon
8x M3x10 grub screw  Buy at Amazon

Gallery

3D printing information

  • Filament type: e.g: PLA
  • Layer thickness: 0.2mm
  • Infill: 15%
  • Wall lines: 2

Videos

No videos are available yet.

Dimensions

The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.

File list

  • 60mm_fan_grid_X.stl
  • holder_plate_base_Icy_box_3.5inch_housing_X.stl
  • holder_plate_front_back_Icy_box_3.5inch_housing_X.stl
  • holder_plate_top_Icy_box_3.5inch_housing_X.stl

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products