Description
With the help of the components for the Raspberry Pi Touch Display 2 Frame Horizontal you can install the new Touch Display 2 from the Raspberry Pi Foundation in a picture frame-like housing.
The USB ports of the built-in Raspberry Pi are still accessible and the housing can also be set up at an angle thanks to the integrated set-up arm.
Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project. This offer includes the STL files you need to print the 3D printable components for the Raspberry Pi Touch Display 2 Frame Horizontal required.
- You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
- Observe the safety instructions linked below during assembly and use: Click here
Additional components are required to build the complete project. A complete list of the required parts can be found here
Required tool:
| Number | Link |
|---|---|
| 1x | Screwdriver set Buy at Amazon |
| 1x | Soldering iron Buy at Amazon |
| 1x | Prusa 3D printer |
Material required
Gallery
3D printing information
I recommend printing the components in the orientation specified by the respective file. I also recommend the following print settings.
- Filament type: e.g: PLA
- Layer thickness: 0.2mm
- Infill: 15%
- Wall lines: 2
Videos
No videos are available yet.
Dimensions
The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later. 
File list
- touch_display_2_housing_slim_base_X.stl
- touch_display_2_housing_slim_leg_holder_X.stl
- touch_display_2_housing_slim_leg_X.stl
- touch_display_2_housing_slim_lid_X.stl
English 
Deutsch 
Français 
Español 
Nederlands
Reviews
There are no reviews yet.