Description
The PrintAirPipe - 125mm pipe segment set is a 3D printable pipe system with an outer diameter of 125mm. The various pipe segments can be used to create an individual and customizable exhaust or supply air system. Ideal for transporting the exhaust air from a soldering station, 3D printer or similar to a suitable filter system or wall outlet.
The PrintAirPipe - 125mm pipe segments set consists of various pipe segments with an outer diameter of 125mm, which can be individually connected to each other.
The following segments are currently included in the PrintAirPipe - 125mm pipe segments set:
- 125mm flange segment
- 120mm fan insert
- Filter segment
- Adapter from 125mm to 100mm PrintAirPipe Standard
- Adapter from 125mm to 80mm PrintAirPipe Standard
- Adapter from 125mm to 50mm PrintAirPipe Standard
- 125mm 90° connector
- 125mm 45° connector
- 125mm 22.5° connector
- 125mm Y-distributor segment
- 125mm Y-distributor straight segment
- 125mm extension 50mm
- 125mm Extension 100mm
- 125mm extension 150mm
- 125mm extension 200mm
- 125mm cover cap
Are you looking for other offers for the PrintAirPipe system?
- Under Nerdiy.de/papp you will find all available segments.
Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project. This offer contains the STL files you need to print the 3D printable components for the PrintAirPipe System required.
- You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
- Observe the safety instructions linked below during assembly and use: Click here
Additional components are required to build the complete project. A complete list of the required parts can be found here Required tool:
| Number | Link |
|---|---|
| 1x | Screwdriver set Buy at Amazon |
| 1x | Soldering iron Buy at Amazon |
| 1x | Prusa 3D printer |
Required material:
Videos
No videos are available yet.
Components overview & dimensions
The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.
120mm fan connection flange
Two of the 120mm fan connection flanges can be used to connect a 120mm fan to the PrintAirPipe system.
| Number | Link |
|---|---|
| 1x | 120mm fan Buy at Amazon |
| 8x | Fan mounting screws Buy at Amazon |
Locking pin
The locking pin can be used to secure two connected segments so that they can no longer be twisted against each other.
Connecting ring
The connecting ring parts can be used to connect the different pipe segments of the PrintAirPipe system. Required material:
| Number | Link |
|---|---|
| 1x | M3x8 countersunk head screw Buy at Amazon |
| 1x | M3 thread insert Buy at Amazon |
Connecting ring incl. wall bracket
Using the connecting ring parts, it is possible to connect the various pipe segments of the PrintAirPipe system to each other. Thanks to the wall bracket, this connecting ring can also be attached to the ceiling/wall (for example) in order to permanently mount the assembled PrintAirPipe system. Required material:
| Number | Link |
|---|---|
| 1x | M3x8 countersunk head screw Buy at Amazon |
| 1x | M3 thread insert Buy at Amazon |
Cover cap
The cover cap can be used to close an open pipe segment. To do this, the cover cap is placed in front of it and fixed to the pipe segment with a connecting ring.
22.5° pipe connector
The 22.5° pipe connector is a connecting piece with a bend of 22.5°. It can be used when the pipe needs to be guided around a bend.
45° pipe connector
The 45° pipe connector is a connecting piece with a 45° bend. It can be used when the pipe needs to be guided around a bend.
90° pipe connector
The 90° pipe connector is a connecting piece with a 90° bend. It can be used when the pipe needs to be guided around a bend.
Filter insert
The filter insert makes it possible to add a filter mat to the PrintAirPipe system. The 125x125x10mm filter mat is simply inserted from the outside and closed with a cover. The filter mat can therefore be replaced later without having to dismantle the pipe system. Required material:
| Number | Link |
|---|---|
| 2x | M3x8 countersunk head screw Buy at Amazon |
| 2x | M3 thread insert Buy at Amazon |
Flange connection
The PrintAirPipe system can be connected to a housing, wall or similar using the flange connection.
Extension piece 50mm
This extension piece allows the pipe run to be extended by 50 mm. 
Extension piece 100mm
This extension piece allows the pipe run to be extended by 100 mm. 
Extension piece 150mm
This extension piece allows the pipe run to be extended by 150 mm. 
Extension piece 200mm
This extension piece allows the pipe run to be extended by 200 mm. 
Reducer 50mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 50 mm.
Reducer 80mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 80 mm. 
Reducer 100mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 100 mm.
HT pipe 50 connection adapter
The HT pipe 50 connection adapter can be used to connect the PrintAirPipe system to an HT50 pipe.
HT pipe 75 connection adapter
With the HT pipe 75 connection adapter, the PrintAirPipe system can be connected to an HT75 pipe.
HT pipe 90 connection adapter
The HT 90 pipe connection adapter can be used to connect the PrintAirPipe system to an HT90 pipe.
HT pipe 110 connection adapter
The HT 110 pipe connection adapter can be used to connect the PrintAirPipe system to an HT 110 pipe.
Y-adapter Angled
With this Y-adapter, it is possible to expand the PrintAirPipe system to two connections or to merge two connections into one.
Straight Y-adapter
With this Y adapter, it is possible to extend the PrintAirPipe system to two connections or to merge two connections into one. The connections are all arranged in the same pipe direction.
File list
- PrintAirPipe_125mm_22,5_deg_pipe_X.stl
- PrintAirPipe_125mm_45_deg_pipe_X.stl
- PrintAirPipe_125mm_90_deg_pipe_X.stl
- PrintAirPipe_125mm_cap_X.stl
- PrintAirPipe_125mm_connector_ring_female_incl_wall_mount_X.stl
- PrintAirPipe_125mm_connector_ring_female_X.stl
- PrintAirPipe_125mm_connector_ring_male_X.stl
- PrintAirPipe_125mm_extension_pipe_50mm_X.stl
- PrintAirPipe_125mm_extension_pipe_100mm_X.stl
- PrintAirPipe_125mm_extension_pipe_150mm_X.stl
- PrintAirPipe_125mm_extension_pipe_200mm_X.stl
- PrintAirPipe_125mm_filter_insert_cap_X.stl
- PrintAirPipe_125mm_filter_insert_X.stl
- PrintAirPipe_125mm_flange_X.stl
- PrintAirPipe_125mm_to 50mm_adapter_X.stl
- PrintAirPipe_125mm_to 80mm_adapter_X.stl
- PrintAirPipe_125mm_to 100mm_adapter_X.stl
- PrintAirPipe_125mm_to HT50_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT75_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT90_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT110_pipe_adapter_X.stl
- PrintAirPipe_125mm_to_120mm_fan_adapter_X.stl
- PrintAirPipe_125mm_y_pipe_straight_X.stl
- PrintAirPipe_125mm_y_pipe_X.stl
- PrintAirPipe_orientation_bolt_X.stl
English 
Deutsch 
Français 
Español 
Nederlands
Reviews
There are no reviews yet.