The IKEA FYRTUR roller blind is a very easy way to retrofit your windows with an easily controllable roller blind. Thanks to the Zigbee connection, you can then do this for all possible scenarios […]
Weiterlesen
Tag: Zigbee
HowTo: HowTo: Integrate Zigbee - Ikea TRADFRI Outlet E1603/E1702/E1708 via zigbee2mqtt in Node Red
The TRADFRI plug is a simple way to switch existing consumers such as lamps via your smart home system via Zigbee The consumer can be switched on and off. At the same time it acts [...]
Weiterlesen
HowTo: Zigbee - Electrolama zig-a-zig-ah! (zzh!) Coordinator USB stick with zigbee2mqtt firmware flashing
In the article Zigbee - Preparing a Sonoff zigbee 3.0 USB Dongle Plus for zigbee2mqtt I have described how to prepare a Sonoff zigbee stick with the firmware for zigbee2mqtt [...]
Weiterlesen
HowTo: Zigbee - Integrate Ikea SYMFONISK E1744 remote control via zigbee2mqtt in NodeRed
The Ikea SYMFONISK E1744 remote control is actually intended as a control for the SYMFONSIK WiFi speaker from Ikea. It can then be used to control the volume or change the track. Thanks to Zigbee [...]
Weiterlesen
HowTo: Zigbee - IKEA STYRBAR push button E2001/E2002 via zigbee2mqtt into NodeRed
The IKEA STYRBAR button is slightly larger than the little brother of the Ikea TRADFRI E1743 button. But it also offers a few more functions and - due to the two [...]
Weiterlesen
HowTo: Zigbee - Integrate Xiaomi Aqara MCCGQ11LM door/window sensor into NodeRed via zigbee2mqtt
In the article on the Sonoff SNZB-03 motion detector and Ikea TRADFRI motion detector, I mentioned before that a smart home can also be expanded into a (limited) alarm system. You can […]
Weiterlesen
HowTo: Zigbee - Integrate Ikea TRADFRI motion detector E1525/E1745 via zigbee2mqtt in Node Red
In the article about the Sonoff SNZB-03 motion detector, I already described how you can use a motion detector to further automate your own SmartHome. Not only lights […]
Weiterlesen
HowTo: Zigbee - read 4x wall switches TuYa TS0044 using Node Red
In a large part of my smart home I use the Ikea TRADFRI E1743 buttons. These can be used to conveniently switch up to four devices on and off. Recently I […]
Weiterlesen
HowTo: Zigbee - IKEA TRADFRI shortcut button E1812 via zigbee2mqtt into Node Red
The IKEA TRADFRI shortcut button E1812 is the little brother of the Ikea TRADFRI E1743 button. Both are identical in size. The only differences with the shortcut button are that this […]
Weiterlesen
HowTo: Zigbee - Integrate TuYa room temperature and humidity sensor TS0201 into Node Red via zigbee2mqtt
I stumbled across the TuYa TS0201 temperature and humidity sensor while looking for a simple humidity sensor. Actually, I was looking for a simple humidity sensor with a display […]
Weiterlesen
HowTo: Zigbee - Sonoff SNZB-03 motion detector via zigbee2mqtt into NodeRed
I think a smart home is always really practical when it relieves work or makes life more pleasant. Admittedly, the possibilities are not huge in this regard. But who ever […]
Weiterlesen
HowTo: Zigbee - Integrate Ikea TRADFRI E1743 push button via zigbee2mqtt in NodeRed
The IKEA TRADFRI button E1743 is one of the most used buttons in my SmartHome. It is very cheap at (currently) 6 euros per piece and at the same time the quality is very good […]
Weiterlesen
HowTo: Zigbee - Register devices or sensors and actuators to zigbee2mqtt
In order for you to be able to use Zigbee devices for your SmartHome, they must of course first be connected to your Zigbee network. This can be implemented in different ways. The easiest way new devices […]
Weiterlesen
HowTo: Zigbee - Prepare a Sonoff zigbee 3.0 USB Dongle Plus for zigbee2mqtt
To be able to use Zigbee sensors or actuators to control your SmartHome with zigbee2mqtt you need a Zigbee adapter. This is the interface between Zigbee device and SmartHome system (e.g. NodeRed) and [...]
Weiterlesen
HowTo: Zigbee - Migrate a CC2530/CC2531 coordinator under zigbee2mqtt to another coordinator
I've been using zigbee2mqtt for quite a while to integrate Zigbee sensors and actuators into my SmartHome. For a few years I have had one on the CC2530 or CC2531 IC […]
Weiterlesen
HowTo: Zigbee - Administration of Zigbee2mqtt via Dashboard
Zigbee2mqtt could initially only be configured and controlled via the configuration file or access to the MQTT server. Meanwhile, however, there is a very useful extension for zigbee2mqtt that makes it possible [...]
Weiterlesen
HowTo: Zigbee - Installation of zigbee2mqtt on the Raspberry Pi
Recently I started to convert parts of my SmartHome to the Zigbee standard. In the past, I still used sensors and actuators based on the simple 433Mhz radio. [...]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands