As soon as you work with OpenMediaVault and use various services and plugins, it makes sense to create a new user at some point. In this way, you can set access rights in a well-dosed manner, which ultimately helps to increase security.
The following article describes how you can create a new user using OpenMediaVault.
I know the following hints are always a bit annoying and seem unnecessary. But unfortunately, many people who knew it "better" from carelessness lost their eyes, fingers or other things or hurt themselves. In comparison, a loss of data is almost not worth mentioning, but even these can be really annoying. Therefore, please take five minutes to read the safety instructions. Even the coolest project is worth no injury or other annoyance. https://www.nerdiy.de/en/sicherheitshinweise/
The links to online shops listed here are so-called affiliate links. If you click on such an affiliate link and shop via this link, Nerdiy.de receives a commission from the online shop or provider concerned. The price doesn't change for you. If you do your purchases via these links, you will support Nerdiy.de in being able to offer further useful projects in the future. 🙂
Before you start this article, you should have prepared a Raspberry Pi so that it can be reached via the network and controlled via SSH.
The following articles describe what needs to be done to prepare the Raspberry Pi.
- RaspberryPi – Setup for nerdiys!
- RaspberryPi – The first configuration!
- RaspberryPi – Control the RaspberryPi via SSH
- Raspberry Pi – Build Network Attached Storage / NAS from a Raspberry Pi 4 yourself
- Raspberry Pi – Install OpenMediaVault / OMV on the Raspberry Pi
In the following lists you will find all the parts you need to implement this article.
|1x||Raspberry Pi Bei Amazon kaufen|
|1x||Raspberry Pi Netzteil Bei Amazon kaufen|
|1x||Raspberry Pi Gehäuse Bei Amazon kaufen|
|1x||Micro SD Karte 64GB Bei Amazon kaufen|
Create users using OpenMediaVault
In order to create a user, you must first log into the OpenMediaVault web interface.
Click on the “Users” category and…
… then again on the subcategory “User”.
In the view that appears, click on the small plus in the upper left corner and…
… on “Create”.
This will take you to the input mask where you can enter all the details for the new user.
Here you should set a username and password. You can also assign the user to a group and store an SSH key for it.
Once you’ve configured everything, you need to click “Save” to create the new username.
You then have to enable the configuration by clicking on the checkmark in the yellow area and…
… accept another confirmation.
After that, the new user is immediately available. You can then use it, for example, as a user to share folders via the SMB server. You can find information about this, for example, in the article OpenMediaVault – Set up Windows share/SMB server.
This completes the installation of OMV. I have described the many other functions in other articles. There you will also find information on how to expand the functionality of your OMV installation accordingly. These articles are all grouped into the following categories.
Have fun with the project
I hope everything worked as described. If not or you have any other questions or suggestions, please let me know in the comments. Also, ideas for new projects are always welcome. 🙂
P.S. Many of these projects - especially the hardware projects - cost a lot of time and money. Of course I do this because I enjoy it, but if you appreciate it that I share these information with you, I would be happy about a small donation to the coffee box. 🙂