BreadBordBox Set – 3D Druckbar – STL Dateien

Beschreibung

Das BreadBoardBox Gehäuse Set beinhaltet die STL Dateien zu zwei Gehäuse in die Streifen eines „Breadbords“ bzw. Steckplatine eingesetzt werden können. 

Die vorbereiteten Kabeleinführungen lassen sich herausbrechen um bis zu drei Kabel einführen zu können. Außerdem gibt es vorbereitete Borhmarkierungen um zusätzliche Kabeleinführung bohren zu können.
Zustzlich kann ein XIAO ESP32 so verbaut werden, dass sein USB-C Anschluss von außen erreichbar ist. 

Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project. This offer contains the STL files you need to print the 3D printable components for the BreadBoardBox Gehäuse Set required.

• You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
• Observe the safety instructions linked below during assembly and use: Click here

Additional components are required to build the complete project. A complete list of the required parts can be found here

Required tool:

Required material:

Gallery

3D printing information

The recommended 3D print settings are listed below.

• Filament type: e.g: PLA
• Layer thickness: 0.2mm
• Infill: 15%
• Wall lines: 2

Videos

Dimensions

The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.    

File list

• BreadBoardBox_by_nerdiy.de_full_sized_base_X.stl
• BreadBoardBox_by_nerdiy.de_full_sized_lid_X.stl
• BreadBoardBox_by_nerdiy.de_half_sized_base_X.stl
• BreadBoardBox_by_nerdiy.de_half_sized_lid_X.stl