PrintAirPipe - 120mm Radial Fan Segment - 3D Printable - STL Files

6,99 €

No VAT statement, as small business owner according to §19 (1) UStG.

Categories: , ,

Description

Mit dem PrintAirPipe – 120mm Radial Lüfter Segment für das PrintAirPipe 125mm System könnt Ihr Euer PrintAirPipe Rohrsystem zwangsbelüften. Die Drehzahl des eingebauten Radial Lüfters kann dank PWM Regelung und ESPHome basierter Steuerung sowohl gesteuert als auch ausgelesen werden.

You can therefore not only set the current rotational speed. It is also possible to read out the current speed and thus verify that the desired speed has been reached.

In addition to the fan, the circuit board with the complete control electronics is also required. As soon as this is available, it will be linked here.

Depending on the installation direction, the fan can be used for ventilation or extraction.

Are you looking for other offers for the PrintAirPipe system?

Under Nerdiy.de/papp you will find all available segments.

Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project. This offer contains the STL files you need to print the 3D printable components for the PrintAirPipe – 120mm Radial Lüfter Segment required.

  • You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
  • Observe the safety instructions linked below during assembly and use: Click here

Additional components are required to build the complete project. A complete list of the required parts can be found here

Required tool:

Number Link
1x Screwdriver set  Buy at Amazon
1x Soldering iron  Buy at Amazon
1x Prusa 3D printer

Required material:

Number Link
1x SeeedStudio XIAO ESP32-S3 or SeeedStudio XIAO ESP32-S3 
3x M2 thread insert  Buy at Amazon
3x WS2812 LED on PCB  Buy at Amazon
3x M2x8 countersunk screw  Buy at Amazon
1x Radial Lüfter 120mm  Buy at Amazon
3x Fan screws 5.0 x 10.0mm  Buy at Amazon
1x M3x6 cylinder head screw  Buy at Amazon
1x Washer for M3  Buy at Amazon
1x Nut M3  Buy at Amazon
1x M3x25 countersunk screw  Buy at Amazon
2x M3 thread insert  Buy at Amazon
1x Stranded wire  Buy at Amazon
1x  USB-C cable 5V/3A  Buy at Amazon
1x  USB power supply 5V/3A  Buy at Amazon
1x 3D printing FIlament PETG  Buy at Amazon
1x Prusa 3D printer

Gallery

3D printing information

The recommended 3D print settings are listed below.

  • Filament type: e.g: PLA
  • Layer thickness: 0.2mm
  • Infill: 15%
  • Wall lines: 2

ESPHome example configuration

You can find an example configuration for ESPHome under the following link:

Videos

Dimensions

Below you can see an overview of the dimensions of the segment. If dimensions are missing, please use the contact form let us know and we will add this later.

File list

  • printAirPipe_125mm_radial_fan_segment_electronics_cap_assembly_X.stl
  • PrintAirPipe_125mm_RadialFan_segment_lid_X.stl
  • PrintAirPipe_125mm_RadialFan_segment_X.stl

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products