PrintAirPipe - 360° Intake Segment - 3D printable - STL files

6,99 

Categories: , ,

Description

With the PrintAirPipe - 360° Intake Segment, it is possible to direct the air inside the PrintAirPipe pipe system to the outside or to draw air from the outside into the inside of the pipe system.

The ventilation openings in the segment can be closed or opened either manually using a small lever or automatically.

The firmware of the control electronics is based on ESPHome and can therefore be integrated into many SmartHome systems such as HomeAssistant.

Are you looking for other offers for the PrintAirPipe system? There are also the following segments:


Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project.

This offer contains the STL files you need to print the 3D printable components for the PrintAirPipe - 360° Intake Segment required.

  • You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
  • Observe the safety instructions linked below during assembly and use: Click here

Additional components are required to build the complete project. A complete list of the required parts can be found here

Required tool:

Number Link
1x Screwdriver set  Buy at Amazon
1x Soldering iron  Buy at Amazon

Required material:

Number Link
1x SeeedStudio XIAO ESP32-S3  Buy at Amazon
22x M2 thread insert  Buy at Amazon
1x M2x16 countersunk head screw  Buy at Amazon
1x  MG90 Servo  Buy at Amazon
1x SeeedStudio XIAO ESP32-S3  Buy at Amazon
1x M2x8 countersunk screw  Buy at Amazon
1x M2x8 countersunk screw  Buy at Amazon
2x M3x8 countersunk head screw  Buy at Amazon
2x M2x12 countersunk head screw  Buy at Amazon
1x M2x10 countersunk head screw  Buy at Amazon
12x M2x6 countersunk head screw  Buy at Amazon
1x Washer for M3  Buy at Amazon
1x Nut M3  Buy at Amazon
1x M3x6 cylinder head screw  Buy at Amazon
1x Stranded wire  Buy at Amazon
1x  USB-C cable 5V/3A  Buy at Amazon
1x  USB power supply 5V/3A  Buy at Amazon
1x 3D printing FIlament PETG  Buy at Amazon

Gallery


3D printing information

The recommended 3D print settings are listed below. 

  • Filament type: e.g: PLA
  • Layer thickness: 0.2mm
  • Infill: 15%
  • Wall lines: 2

ESPHome example configuration

You can find an example configuration for ESPHome under the following link:


Videos


Dimensions

The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.


File list

  • 360degree_inatek_electronics_housing_lid_X.stl
  • 360degreen_intake_segment_mcu_clamp_X.stl
  • electronics_housing_assembly_X.stp
  • PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_connection_rod_X.stl
  • PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_lever_manual_X.stl
  • PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_lever_X.stl
  • PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_X.stl
  • PrintAirPipe_125mm_360degree_intake_segment_200mm_X.stl
  • servo_connection_lever_360degree_intake_X.stl
  • servo_elevation_lever_360degree_intake_X.stl

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.