A cool and practical plugin for the MagicMirror is the plugin "MMM-GoogleMapsTraffic". This shows you the status of the current traffic in your area. How to install this is described in the [...]
Weiterlesen
Tag: RasPi
HowTo: Node Red – Set up a “welcome boost” for the heating when you are new
Especially non-tech-savvy roommates are mostly skeptical about this whole SmartHome thing. Questions are constantly asked such as "But why do you need that?" or "And that's so important now that [...]
Weiterlesen
HowTo: Magic Mirror – Installation of the required software
A MagicMirror consists of an important part of software besides the obvious mirror&screen. There are now some good software packages for this. The best one in my opinion is the one from Michael Teeuw. He has developed the for [...]
Weiterlesen
HowTo: Node Red – Control devices with Apple HomeKit and read sensors
You can swear about Apple devices or idolize them, but what Apple has done very well is to integrate SmartHome components into their operating systems. Thus, iOs inherently brings a [...]
Weiterlesen
HowTo: Node Red – Integrate 433Mhz SOS button
In the article about the 433Mhz mini-button I had already reported on my forays through the wonders of the electronic product world. In the process, I also noticed a 433Mhz SOS button, which probably [...]
Weiterlesen
HowTo: Node Red – Integrate 433Mhz wireless wall button
Another practical find during my forays through the electronic product world is the 433Mhz wireless wall switch. It can be easily integrated into NodeRed or any other SmartHome system using the RF Bridge. How [...]
Weiterlesen
HowTo: Magic Mirror – set up autostart
"Out-of-theBox" the installed MagicMirror software does not start automatically after the RaspberryPi is booted. Therefore it is practical to set up an autostart for the MagicMirror software. How to do this is described in the following article. [...]
Weiterlesen
HowTo: Node Red / Magic Mirror – Display data from Node Red on the mirror
For a long time I have been looking for a way how I can display the data I collect with NodeRed from my SmartHome comfortably on the MagicMirror. Thanks to the many plugins [...]
Weiterlesen
HowTo: Magic Mirror – Install 3rd party modules
As already mentioned in the article MagicMirror - Installation of the required software, the basic functionality of the MagicMirror software can be extended by various plugins. Where you can find these plugins and how you can use them [...]
Weiterlesen
HowTo: Node Red – Display W-Lan networks in the area
I must admit that I haven't found a real use for this feature yet, but I'm sure someone will get some use out of it someday. In this article, [...]
Weiterlesen
HowTo: Node Red – Display server uptime in the dashboard
In addition to the data from your SmartHome, you can also display data about the server on which NodeRed is running. How to view the uptime (i.e. the running time) of your Raspberry Pi in the dashboard [...]
Weiterlesen
HowTo: Node Red / FritzBox – presence detection with the FritzBox
An important event that your SmartHome should be able to react to is the presence status of the residents. For example, you can turn off lamps when you are absent or turn on radiators when you are present.
Weiterlesen
HowTo: Node Red – Display Raspberry Pi's system data on the dashboard
Besides the exciting data that a SmartHome generates, you should also care a little about the status of the heart of the SmartHome. Do you have your NodeRed installation on a RaspberrypPi(or other [...]
Weiterlesen
HowTo: Node Red / FritzBox – Show call notification
If you have a FritzBox in your home in addition to a RaspberryPi with NodeRed, the following article could be of interest to you. This explains how you […]
Weiterlesen
HowTo: Node Red – Show internet connection information in the dashboard
The following article explains how you can display information about your Internet connection. The current Internet IP address is retrieved every hour and a speed test is carried out, which shows you the download [...]
Weiterlesen
HowTo: Raspberry Pi – Install speech output with eSpeak
With the package "espeak" you can use the RaspberryPi to read out texts - and even whole files. How this works and what you have to consider [...]
Weiterlesen
HowTo: Raspberry Pi – Login via SSH without password query
The more you get into all this IT/software/progammy stuff the quicker you'll find that the possibilities of related automation make you terribly lazy. One of those moments in [...]
Weiterlesen
HowTo: Raspberry Pi – Set up an automatic daily restart
I recently had the problem that my MagicMirror stopped working properly after two days at the latest. For some reason, the screen stayed black and it was also on the [...]
Weiterlesen
HowTo: Node Red – Encrypt connection
In the article NodeRed - User login setup it was already pointed out that it is very important to secure the access to your NodeRed configuration interface. Especially when you access your [...]
Weiterlesen
HowTo: Node Red – Set up user login
After the first installation of NodeRed you can(/should) normally access the configuration interface of NodeRed without major obstacles. This is convenient because you can start directly with the configuration. [...]
Weiterlesen
HowTo: Node Red – Installing Node Red on the Raspberry Pi
NodeRed is in my opinion one of the most intuitive graphical programming tools in the SmartHome/IoT area. In NodeRed, program sequences are not (only) executed with program code, but for the most part with function blocks (nodes) that are combined with each other and [...]...
Weiterlesen
HowTo: Raspberry Pi – Set SSH and WiFi before the first boot process
By default, SSH access is disabled on a RaspberryPi. So if you start a fresh RaspberryPi for the first time or you have reinstalled the operating system, the login is disabled.
Weiterlesen
HowTo: Node Red – Reboot, Shutdown and Boot Remote Raspberry Pi
This article describes how you can execute commands from NodeRed on a remote Linux system and thus be able to reboot another system [...].
Weiterlesen
HowTo: Node Red – Install new nodes
Das tolle an NodeRed ist neben der einfachen Programmierung, dass es allerhand Plugins (In NodeRed „nodes“ genannt) gibt mit denen sich der Funktionsumfang von NodeRed erweitern lässt. Eine Liste der […]
Weiterlesen
HowTo: Node Red – Execute Action at ServerStart
Depending on how you configure your Node-Red installation, it can be handy that it tells you when Node-Red is restarted. For example, you will be notified about crashes and [...]
Weiterlesen
HowTo: Node Red – Integrate 433Mhz window contact
In the article about the 433Mhz mini pushbutton, I had already reported on my forays through the wonders of the electronic product world. In the process, not only the 433Mhz wireless wall switch, 433Mhz mini push button [...]
Weiterlesen
HowTo: Raspberry Pi – Send FM signals via GPIO pin
Thanks to a technical trick and a suitable script, you can use the RaspberryPi - without additional hardware (apart from a piece of wire) - to send audio files and even whole texts via FM signal [...]
Weiterlesen
HowTo: Raspberry Pi – Output voice output via FM signal
In the articles RaspberryPi - Installing Speech Output with eSpeak and RaspberryPi - Sending FM Signals via GPIO Pin it is described how to use the RaspberryPi to read out texts and send FM signals [...].
Weiterlesen
HowTo: Node Red - Read UPS status
One of the weak points of a SmartHome system that you only really become aware of when something goes wrong is "energy". All the sensors, actuators and the controlling intelligence behind them are now running [...]
Weiterlesen
HowTo: Raspberry Pi – Music streaming to the Raspberry Pi via DLNA client
Especially if your RaspberryPi is running in standby most of the day it makes sense to give it other tasks than the one it was originally designed for. So is [...]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands