Thanks to the very universal Tasmota firmware (Sonoff 433Mhz Rf Bridge with Tasmota firmware flashing) you can send and receive pretty much any 433Mhz signal using the Sonoff RF Bridge. However, this works [...]
Weiterlesen
Category: SmartHome
The SmartHome category contains all articles that deal in any way with the configuration and operation of various SmartHome systems.
HowTo: Raspberry Pi – Output voice output via FM signal
In the articles RaspberryPi - Installing Speech Output with eSpeak and RaspberryPi - Sending FM Signals via GPIO Pin it is described how to use the RaspberryPi to read out texts and send FM signals [...].
Weiterlesen
HowTo: Node Red - Read UPS status
One of the weak points of a SmartHome system that you only really become aware of when something goes wrong is "energy". All the sensors, actuators and the controlling intelligence behind them are now running [...]
Weiterlesen
HowTo: Raspberry Pi – Music streaming to the Raspberry Pi via DLNA client
Especially if your RaspberryPi is running in standby most of the day it makes sense to give it other tasks than the one it was originally designed for. So is [...]
Weiterlesen
HowTo: Node Red – Integrate 433Mhz mini button
On my (almost daily) forays through the wonders of the electronic product world, I recently came across this little guy: A roughly two-euro piece of 433Mhz wireless pushbutton, which is powered by a [...]
Weiterlesen
HowTo: Node Red – Import and Export Node Code / Flows
Another great feature of NodeRed is that the complete - or individual parts of the configuration - can be exported formatted as a JSON string. JSON strings are strings in which configurations [...].
Weiterlesen
HowTo: Node Red – Warning if humidity is too high
Especially in rooms where a lot of water or water vapor is "worked", you should always ventilate sufficiently to avoid damage and health hazards caused by mold. If you are one of the [...]
Weiterlesen
HowTo: Node Red – Send Pushbullet messages on events
Pushbullet is a free and easy way to receive push messages on your smartphone or computer. So you can use this free service (up to 500 messages/month) to send text information or even pictures [...]
Weiterlesen
HowTo: Display/find out the IP address of the devices in the network
Especially if you are a bit more involved with the Internet, network or your own SmartHome, you will sooner or later be faced with the problem of how to manage the IP addresses of individual devices in the [...]
Weiterlesen
HowTo: FHEM – install nanoCul
A smart home system is only really fun when it can communicate with other components. Since many systems use wireless connections for communication, it is only logical to start using FHEM as soon as possible.
Weiterlesen
HowTo: RaspberryPi – Install MQTT Server on the RaspberryPi
MQTT (Message Queue Telemetry Transport) is the protocol that is becoming more and more important in the world of Internet of Things. With this protocol it is very easy to transfer different data between different [...]...
Weiterlesen
HowTo: FHEM – Installation on the RaspberryPi
A term that you come across more and more often in everyday life is "SmartHome". But what is behind it? And do I really need it? Smart home (= intelligent home) is a generic term for [...].
Weiterlesen
HowTo: Install FHEM – MQTT module
In the article RaspberryPi - Install MQTT Server on the RaspberryPi I had written a little bit about MQTT and explained how to install an own MQTT server on the RaspberryPi. With this [...]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands