When I moved into a new apartment, I was faced with a new (absolute luxury) problem. My old MagicMirror, which I had previously installed in my bathroom cabinet, couldn't move with me because [...]
Weiterlesen
Tag: Raspberry Pi
HowTo: OpenMediaVault – Install PhotoPrism via Docker on the Raspberry Pi
PhotoPrism is a very cool piece of software that you can use to manage your photo collection locally. Once set up, your photos will be scanned and categorized using AI models. That means you […]
Weiterlesen
HowTo: Integrate Zigbee – IKEA FYRTUR roller blind E1757 into Node Red via zigbee2mqtt
The IKEA FYRTUR roller blind is a very easy way to retrofit your windows with an easily controllable roller blind. Thanks to the Zigbee connection, you can then do this for all possible scenarios […]
Weiterlesen
HowTo: Raspberry Pi - Show GPIO overview of the Raspberry Pi in the console
The Raspberry Pi is famous for many of its features. On the one hand there is the size, performance and (at times when there is no shortage of components) also the price for such a small practical […]
Weiterlesen
HowTo: Node Red - Reading SMA Sunny Solar Inverter Data
In the articles Reading out data from an SMA EV CHARGER 22 Wallbox and Reading out Node Red – SMA Sunny Home Manager data, I had already described how to […]
Weiterlesen
HowTo: OpenMediaVault - Configure and activate ClamAV virus scanner
As a Windows user, you are used to the fact that there is always a virus scanner watching somewhere in the background and immediately informs you about an infection with malware or already acts accordingly. I use [...]
Weiterlesen
HowTo: Node Red - Reading SMA Sunny Home Manager Data
For some time now, my network (in addition to an SMA EV Charger 22 wallbox) has also included an SMA inverter for a photovoltaic system and an associated SMA Sunny Home Manager. The latter [...]
Weiterlesen
HowTo: HowTo: Integrate Zigbee - Ikea TRADFRI Outlet E1603/E1702/E1708 via zigbee2mqtt in Node Red
The TRADFRI plug is a simple way to switch existing consumers such as lamps via your smart home system via Zigbee The consumer can be switched on and off. At the same time it acts [...]
Weiterlesen
HowTo: Raspberry Pi - Using Docker Container with OpenMediaVault OMV and Portainer
Another practical advantage of OpenMediaVault is that you can easily add more features thanks to the prebuilt Docker and Portainer installation. Docker containers are a kind of software package that [...]
Weiterlesen
HowTo: OpenMediaVault - Install DLNA Plugin for Media Streaming
In the article Raspberry Pi - Music streaming to the Raspberry Pi via DLNA client I already described how to use the Raspberry Pi as a playback device for content from a DLNA server [...].
Weiterlesen
HowTo: OpenMediaVault - Set up external hard disk as drive
As the name of OpenMediaVault suggests, it is about managing media. For this you need of course also appropriate storage space. In the article NetworkAttachedStorage / NAS from a [...]
Weiterlesen
HowTo: OpenMediaVault - Create another user
As soon as you work with OpenMediaVault and use different services and plugins it makes sense to create a new user. This way you can set access rights in a well-dosed way, which will ultimately [...]
Weiterlesen
HowTo: Raspberry Pi - Evaluate MPR121 touch sensor via I2C and Node Red
Thanks to the I2C bus, the Raspberry Pi can be equipped with many practical sensors and actuators. One (in my opinion) very elegant possibility for user input is the MPR121. The [...]
Weiterlesen
HowTo: OpenMediaVault - Enable HTTPS encryption for web access
After installing OpenMediaVault, the first thing you should do is enable HTTPS encryption for web access. This ensures that when you access the web interface of OMV all data [...].
Weiterlesen
HowTo: Raspberry Pi - Get an overview of the available memory with NCDU
If you often work with large or many files on the Raspberry Pi, you will sooner or later face the problem that the available memory runs out. This is what happened to [...]
Weiterlesen
HowTo: Node Red - Reading data from a SMA EV CHARGER 22 wallbox
Since a short time there is a SMA EV Charger 22 wallbox in my network. Primarily, of course, this is used to charge an electric car. Nevertheless, I was of course curious what values [...]
Weiterlesen
HowTo: Raspberry Pi - Install OpenMediaVault OMV on the RaspberryPi
In the article RaspberryPi - NetworkAttachedStorage / Building a NAS from a RaspberryPi 4 I already described that the (relatively) new Raspberry Pi 4B is also very well suited [...].
Weiterlesen
HowTo: Raspberry Pi - Build your own NetworkAttachedStorage / NAS with a Raspberry Pi 4
For the last few years, I've mostly relied on Synology NAS for home storage. These come with a fancy interface and can be configured easily but also in detail. Unfortunately, [...]
Weiterlesen
HowTo: Raspberry Pi - Backup system SD card as image
As is often the case with backups, you usually only think about making one when it's too late. That's what happened to me the other day with a [...]
Weiterlesen
HowTo: Raspberry Pi - Mount drive under Linux
As a user of the Raspberry Pi, sooner or later you stumble upon the question of how to connect and access a USB stick, external hard drive or SD card to the Raspberry Pi. [...]
Weiterlesen
Raspberry Pi - Read unique ID of a Raspberry Pi
Normally, all data of a Raspberry Pi is stored on the inserted SD card. This has the advantage that you can easily insert a ready-to-use SD card into another Raspberry Pi [...].
Weiterlesen
HowTo: Zigbee - Integrate Ikea SYMFONISK E1744 remote control via zigbee2mqtt in NodeRed
The Ikea SYMFONISK E1744 remote control is actually intended as a control for the SYMFONSIK WiFi speaker from Ikea. It can then be used to control the volume or change the track. Thanks to Zigbee [...]
Weiterlesen
HowTo: NodeRed - Control and read out FRITZ DECT 200 socket using NodeRed
The FRITZ!Box is not only a very good router for the home network. Equipped with the right Smart Home accessories, it can also become the Smart Home center of your house […]
Weiterlesen
HowTo: Zigbee - IKEA STYRBAR push button E2001/E2002 via zigbee2mqtt into NodeRed
The IKEA STYRBAR button is slightly larger than the little brother of the Ikea TRADFRI E1743 button. But it also offers a few more functions and - due to the two [...]
Weiterlesen
HowTo: Zigbee - Integrate Xiaomi Aqara MCCGQ11LM door/window sensor into NodeRed via zigbee2mqtt
In the article on the Sonoff SNZB-03 motion detector and Ikea TRADFRI motion detector, I mentioned before that a smart home can also be expanded into a (limited) alarm system. You can […]
Weiterlesen
HowTo: Zigbee - Integrate Ikea TRADFRI motion detector E1525/E1745 via zigbee2mqtt in Node Red
In the article about the Sonoff SNZB-03 motion detector, I already described how you can use a motion detector to further automate your own SmartHome. Not only lights […]
Weiterlesen
HowTo: Zigbee - read 4x wall switches TuYa TS0044 using Node Red
In a large part of my smart home I use the Ikea TRADFRI E1743 buttons. These can be used to conveniently switch up to four devices on and off. Recently I […]
Weiterlesen
HowTo: Node Red - Read out the temperature of the FRITZ! DECT Repeater 100
The FRITZ! I recently bought a DECT repeater to improve the range of my DECT phones. Unfortunately, my Fritz Box has to be in the basement, because […]
Weiterlesen
HowTo: Fritz Box - Find out the AIN of your SmartHome device
SmartHome devices that are compatible with the FRITZ!Box are addressed via an AIN. This AIN is a unique identification number that is assigned to the respective device. For example, if you use […]
Weiterlesen
HowTo: Zigbee - IKEA TRADFRI shortcut button E1812 via zigbee2mqtt into Node Red
The IKEA TRADFRI shortcut button E1812 is the little brother of the Ikea TRADFRI E1743 button. Both are identical in size. The only differences with the shortcut button are that this […]
Weiterlesen
English 
Deutsch 
Français 
Español 
Nederlands