Description
The PrintAirPipe system is a 3D printable pipe system. The various pipe segments can be used to create an individual and customizable exhaust or supply air system. Ideal for transporting the exhaust air from a soldering station, 3D printer or similar to a suitable filter system or wall outlet.
The PrintAirPipe system consists of various segments that can be individually connected to each other.
The following segments are currently included in this complete set:
- AirFlowSensor segment
- 360° intake segment
- Servo valve segment
- Air Sensor Segment
- Inch Adapter Set
- Flange segment
- 120mm fan insert
- Filter segment
- Adapter to 100mm PrintAirPipe Standard
- Adapter to 80mm PrintAirPipe Standard
- Adapter to 50mm PrintAirPipe Standard
- 90° connector
- 45° connector
- 22.5° Connector
- Y-distributor segment
- Y-distributor straight segment
- Extension 50mm
- Extension 100mm
- Extension 150mm
- Extension 200mm
- Cover cap
Are you looking for other offers for the PrintAirPipe system?
There are also the following segments:
- PrinAirPipe - Complete set
- PrintAirPipe - Actuator & Sensor Set
- PrinAirPipe - ServoValve
- PrintAirPipe - AirSensor Segment
- PrintAirPipe - AirFlowSensor segment
- PrintAirPipe - 360° intake segment
- PrintAirPipe – Inch Adapter Set
Please note: No physical components will be sent. You will receive the files in STL format and must print them out on a 3D printer in order to build the project.
This offer contains the STL files you need to print the 3D printable components for the PrintAirPipe System required.
- You will soon find further information on the assembly and other components required in the assembly article. It will be linked here as soon as it is published.
- Observe the safety instructions linked below during assembly and use: Click here
Additional components are required to build the complete project. A complete list of the required parts can be found here
Required tool:
| Number | Link |
|---|---|
| 1x | Screwdriver set Buy at Amazon |
| 1x | Soldering iron Buy at Amazon |
| 1x | USB-C cable 5V/3A Buy at Amazon |
Required material:
Videos
No videos are available yet.
Components overview & dimensions
The following is an overview of the usual dimensions of the various pipe segments. If dimensions are missing, please use the contact form let us know and we will add this later.
Electromechanical servo valve
The servo valve can be used to block or regulate the air flow in the duct system. It is controlled via a servo and an ESP32. Both are installed on the unit and supplied with power via a USB-C connection. The firmware is based on ESPHome and can therefore be easily integrated into Home Assistant or other SmartHome systems.
The valve status can also be switched between open and closed directly on the unit using a touch switch installed on the unit. The current status is displayed via an LED on the unit.
Required material:
ESPHome example configuration
You can find an example configuration for ESPHome under the following link:
360° Intake Segment
With the PrintAirPipe - 360° Intake Segment, it is possible to direct the air inside the PrintAirPipe pipe system to the outside or to draw air from the outside into the inside of the pipe system.
The ventilation openings in the segment can be closed or opened either manually using a small lever or automatically.
The firmware of the control electronics is based on ESPHome and can therefore be integrated into many SmartHome systems such as HomeAssistant.
Required material:
ESPHome example configuration
You can find an example configuration for ESPHome under the following link:
AirFlowSensor segment
The PrintAirPipe - 125 AirFlowSensor Segment can be used to measure the volume of air moved or the speed of the air in the pipe system.
The electronics are based on an ESP32 S3, three LEDs and a Hall sensor. The entire electronics can be supplied with power via a USB-C cable. The rotational speed of the propeller inside is shown in an animation on the outside. (Further information in the video linked below)
Required material:
ESPHome example configuration
You can find an example configuration for ESPHome under the following link:
Air Sensor Segment
With the help of the PrintAirPipe - 125 Air Sensor Segment for the PrintAirPipe System it is possible to measure various properties of the air around the pipe system.
For this purpose, a BME680, a BME280 and one of the available Fermion gas sensors from DF-Robot be installed.
The sensors can then be read out using the SeeedStudio XIAO ESP32 S3 built into the sensor segment. Thanks to the firmware based on the ESPHome framework, the data can easily be forwarded to a SmartHome system or elsewhere and processed accordingly.
This also makes it possible to react to certain values. For example, the supply air path can be shut off after a certain change in air quality has been detected. For this purpose, the PrintAirPipe - ServoValve be used.
Required material:
ESPHome example configuration
You can find an example configuration for ESPHome under the following link:
Inch Adapter Set
Mit den PrintAirPipe – 125 Inch Adapter Set könnt ihr Rohre mit Zoll-Abmessungen mit dem PrinAirPipe System verbinden. Die genauen Abmessungen sind auf den Übersichten unten angegeben.
Aktuell gibt es die folgenden Adapter, welche im PrintAirPipe 125 – Inch Adapter Set enthalten sind:
- 1/2″ zu 125mm Adapter
- 3/4″ zu 125mm Adapter
- 1″ zu 125mm Adapter
- 2″ zu 125mm Adapter
- 3″ zu 125mm Adapter
- 4″ zu 125mm Adapter
- 5″ zu 125mm Adapter
- 6″ zu 125mm Adapter
- 8″ zu 125mm Adapter
Required material:
| Number | Link |
|---|---|
| 1x bis 2x | 3D printing FIlament PETG Buy at Amazon |
120mm fan connection flange
Two of the 120mm fan connection flanges can be used to connect a 120mm fan to the PrintAirPipe system.
| Number | Link |
|---|---|
| 1x | 120mm fan Buy at Amazon |
| 8x | Fan mounting screws Buy at Amazon |
Locking pin
The locking pin can be used to secure two connected segments so that they can no longer be twisted against each other.
Connecting ring
The connecting ring parts can be used to connect the different pipe segments of the PrintAirPipe system.
Required material:
| Number | Link |
|---|---|
| 1x | M3x8 countersunk head screw Buy at Amazon |
| 1x | M3 thread insert Buy at Amazon |
Connecting ring incl. wall bracket
Using the connecting ring parts, it is possible to connect the various pipe segments of the PrintAirPipe system to each other. Thanks to the wall bracket, this connecting ring can also be attached to the ceiling/wall (for example) in order to permanently mount the assembled PrintAirPipe system.
Required material:
| Number | Link |
|---|---|
| 1x | M3x8 countersunk head screw Buy at Amazon |
| 1x | M3 thread insert Buy at Amazon |
Cover cap
The cover cap can be used to close an open pipe segment. To do this, the cover cap is placed in front of it and fixed to the pipe segment with a connecting ring.
22.5° pipe connector
The 22.5° pipe connector is a connecting piece with a bend of 22.5°. It can be used when the pipe needs to be guided around a bend.
45° pipe connector
The 45° pipe connector is a connecting piece with a 45° bend. It can be used when the pipe needs to be guided around a bend.
90° pipe connector
The 90° pipe connector is a connecting piece with a 90° bend. It can be used when the pipe needs to be guided around a bend.
Filter insert
The filter insert makes it possible to add a filter mat to the PrintAirPipe system. The 125x125x10mm filter mat is simply inserted from the outside and closed with a cover. The filter mat can therefore be replaced later without having to dismantle the pipe system.
Required material:
| Number | Link |
|---|---|
| 2x | M3x8 countersunk head screw Buy at Amazon |
| 2x | M3 thread insert Buy at Amazon |
Flange connection
The PrintAirPipe system can be connected to a housing, wall or similar using the flange connection.
Extension piece 50mm
This extension piece allows the pipe run to be extended by 50 mm.
Extension piece 100mm
This extension piece allows the pipe run to be extended by 100 mm.
Extension piece 150mm
This extension piece allows the pipe run to be extended by 150 mm.
Extension piece 200mm
This extension piece allows the pipe run to be extended by 200 mm.
Reducer 50mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 50 mm.
Reducer 80mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 80 mm.
Reducer 100mm
This reducer reduces the pipe diameter from the standard diameter (125 mm) to 100 mm.
HT pipe 50 connection adapter
The HT pipe 50 connection adapter can be used to connect the PrintAirPipe system to an HT50 pipe.
HT pipe 75 connection adapter
With the HT pipe 75 connection adapter, the PrintAirPipe system can be connected to an HT75 pipe.
HT pipe 90 connection adapter
The HT 90 pipe connection adapter can be used to connect the PrintAirPipe system to an HT90 pipe.
HT pipe 110 connection adapter
The HT 110 pipe connection adapter can be used to connect the PrintAirPipe system to an HT 110 pipe.
Y-adapter Angled
With this Y-adapter, it is possible to expand the PrintAirPipe system to two connections or to merge two connections into one.
Straight Y-adapter
With this Y adapter, it is possible to extend the PrintAirPipe system to two connections or to merge two connections into one. The connections are all arranged in the same pipe direction.
File list
- PrintAirPipe_125mm_22,5_deg_pipe_X.stl
- PrintAirPipe_125mm_45_deg_pipe_X.stl
- PrintAirPipe_125mm_90_deg_pipe_X.stl
- PrintAirPipe_125mm_cap_X.stl
- PrintAirPipe_125mm_connector_ring_female_incl_wall_mount_X.stl
- PrintAirPipe_125mm_connector_ring_female_X.stl
- PrintAirPipe_125mm_connector_ring_male_X.stl
- PrintAirPipe_125mm_extension_pipe_50mm_X.stl
- PrintAirPipe_125mm_extension_pipe_100mm_X.stl
- PrintAirPipe_125mm_extension_pipe_150mm_X.stl
- PrintAirPipe_125mm_extension_pipe_200mm_X.stl
- PrintAirPipe_125mm_filter_insert_cap_X.stl
- PrintAirPipe_125mm_filter_insert_X.stl
- PrintAirPipe_125mm_flange_X.stl
- PrintAirPipe_125mm_to 50mm_adapter_X.stl
- PrintAirPipe_125mm_to 80mm_adapter_X.stl
- PrintAirPipe_125mm_to 100mm_adapter_X.stl
- PrintAirPipe_125mm_to HT50_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT75_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT90_pipe_adapter_X.stl
- PrintAirPipe_125mm_to HT110_pipe_adapter_X.stl
- PrintAirPipe_125mm_to_120mm_fan_adapter_X.stl
- PrintAirPipe_125mm_y_pipe_straight_X.stl
- PrintAirPipe_125mm_y_pipe_X.stl
- PrintAirPipe_orientation_bolt_X.stl
360° intake segment:
- 360degree_inatek_electronics_housing_lid_X.stl
- 360degreen_intake_segment_mcu_clamp_X.stl
- electronics_housing_assembly_X.stp
- PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_connection_rod_X.stl
- PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_lever_manual_X.stl
- PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_lever_X.stl
- PrintAirPipe_125mm_360degree_intake_segment_200mm_insert_X.stl
- PrintAirPipe_125mm_360degree_intake_segment_200mm_X.stl
- servo_connection_lever_360degree_intake_X.stl
- servo_elevation_lever_360degree_intake_X.stl
AirFlow Sensor segment:
- mcu_clamp_X.stl
- PrintAirPipe_125mm_AirFlowSensor_electronics_housing_assembly_X.step
- PrintAirPipe_125mm_AirFlowSensor_segment_electronics_lid_X.stl
- PrintAirPipe_125mm_AirFlowSensor_segment_propeller_X.stl
- PrintAirPipe_125mm_AirFlowSensor_segment_screw_plug_X.stl
- PrintAirPipe_125mm_AirFlowSensor_segment_X.stl
Air Sensor Segment
- PrintAirPipe_125mm_air_sensor_segment_insert_X.stl
- PrintAirPipe_125mm_co_sensor_segment_insert_lid_X.stl
- PrintAirPipe_125mm_sensor_segment_mcu_clamp_V1.0.stl
- PrintAirPipe_125mm_sensor_segment_V1.0.stl
Inch Adapter Set
- printAirPipe_125mm_to_1/2inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_3/4inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_1inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_2inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_3inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_4inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_5inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_6inch_pipe_adapter_X.stl
- printAirPipe_125mm_to_8inch_pipe_adapter_X.stl
English 
Deutsch 
Français 
Español 
Nederlands
Reviews
There are no reviews yet.